Instrukcja obsługi Oregon Scientific BAR928
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Oregon Scientific BAR928 (8 stron) w kategorii elektroniczna stacja pogody. Ta instrukcja była pomocna dla 7 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/8
GB
1
CABLE FREE WEATHER STATION
MODEL: BAR928
USER’S MANUAL
INTRODUCTION
Congratulations on your purchasing the BAR928 Top Weather
Station.
The BAR928 is an all-in-one clock and weather device. RF- control-
led, it can automatically synchronize its current time and date when
it is brought within an approximate 1500km radius of the radio
signal generated from Frankfurt, Germany (DCF77).
The BAR928 does weather forecasts and tells temperatures, indoors
and outdoors. It also shows the trend of changes plus the recorded
maximum and minimum temperatures. A remote thermo sensor is
included with the unit.
Apart from temperature, the BAR928 shows the indoor relative
humidity and rates the comfort level. It also retains the maximum
and minimum relative humidity readings.
The built-in barometer enables the BAR928 to display the atmos-
pheric pressure with user-selectable altitude adjustment. A bar
graph will show the pressure trend of the last 24 hours.
What is more, the BAR928 is equipped with a moon phase scanner,
which lets you check the moon phase of any day between 1990 and
2089.
Other features include a HiGlo backlight, daily crescendo alarm
with eight-minute snooze function, and extra-large display.
No wire installation is required between the main and remote units.
As the BAR928 operates at 433MHz, it can be used in the U.S. and
most places in Continental Europe.
MAIN FEATURES: MAIN UNIT
RADIO RECEPTION SIGNAL
Indicates the condition of radio reception
SNOOZE/LIGHT BUTTON
Activates the snooze function when an alarm goes off or turn
on the backlight for five seconds
MODE WINDOW
Displays the current time and date
ALARM ON ICON
Appears when the alarm is activated
ALARM ICON
Appears when the alarm time is displayed
MAIN UNIT BATTERY LOW (BATT) INDICATOR
Lights up and blinks when the batteries of the main unit are
running dry
REMOTE UNIT BATTERY LOW (BATT) INDICATOR
Lights up and blinks when the batteries of the remote unit are
running dry
WEATHER FORECAST WINDOW
Displays the weather pattern
TEMPERATURE WINDOW
Shows the current temperature or the maximum or minimum
recorded temperature
IN/OUT-REMOTE INDICATOR
Indicates if the current temperature is displayed as indoors or
outdoor-remote
TEMPERATURE TREND ARROWS
Indicates the trend of temperature changes
°C/°F SLIDE SWITCH
Selects between Centigrade (°C) and Fahrenheit (°F) display
RELATIVE HUMIDITY WINDOW
Displays the indoor relative humidity
COMFORT INDICATOR
Indicates the comfort level of the indoor relative humidity
ATMOSPHERIC PRESSURE CHART
Shows the atmospheric pressure trend chart of the last 24
hours
ATMOSPHERIC PRESSURE WINDOW
Displays the current atmospheric pressure
PRESSURE HISTORY INDICATOR
Indicates the pressure history of previous hours
GB
2
PRESSURE UNIT SLIDE SWITCH
Selects between mb/hPa and inHg display
MOON PHASE SCANNER
Displays the current moon phase or that of the date checked
THERMO BUTTON
Sets the unit in indoor or outdoor-remote temperature mode
MEMORY BUTTON
Displays the maximum or minimum temperature or indoor
relative humidity or erases the memory
HISTORY BUTTON
Displays the pressure history of previous hours
UP ( ) AND DOWN ( ) BUTTONS
Increases or decreases the value of a setting, scan the
moonphase status
ALARM ON/OFF BUTTON
Displays the alarm time or sets the alarm status
MODE BUTTON
Changes the display mode of the clock or triggers the clock
setting mode
RESET BUTTON
Resets the unit by returning all settings to their default values
BATTERY COMPARTMENT
Accommodates four UM3 or AA-size batteries
TABLE AND CONTROL STAND
Acts as control panel and supports the unit when lying flat.
MAIN FEATURES: REMOTE UNIT
LCD
Displays the current temperature monitored by the remote
unit
LED INDICATOR
Flashes when the remote unit transmits a reading
°C/°F SLIDE SWITCH
Selects between Centigrade (°C) and Fahrenheit (°F)
RESET BUTTON
Returns all settings to default values
BATTERY COMPARTMENT
Accommodates two UM4 or AAA-size batteries
WALL-MOUNT HOLDER
Supports the remote unit in wall-mounting
REMOVABLE TABLE STAND
For standing the remote unit on a flat surface
BEFORE YOU BEGIN
For best operation,
1. Insert batteries for remote units before doing so for the main unit.
2. Position the remote unit and main unit within effective transmis-
sion range, which, in usual circumstances, is 30 meters.
Though the remote unit is weather proof, it should be placed away
from direct sunlight, rain or snow.
BATTERY INSTALLATION:
REMOTE UNIT
The remote unit uses two UM4 or AAA-size batteries. To install
them,
1. Remove the screws on the battery compartment.
2. Insert the batteries strictly according to the polarities shown
therein.
3. Select the temperature display unit on the °C/°F slide switch.
4. Replace the battery compartment door and secure its screws.
Replace the batteries when the battery low (BATT) indicator of the
outdoor temperature window lights up.
GB
3
BATTERY INSTALLATION: MAIN UNIT
1. Gently press and lift the tab on the battery compartment door.
2. Insert four UM3 or AA-size batteries.
3. Replace the battery compartment door.
Replace the batteries when the BATT indicator on the weather
forecast window lights up.
HOW TO USE THE BACKLIGHT
Press the SNOOZE/LIGHT button once. The backlight will be
turned on for five seconds.
TIME DISPLAY MODES
The current time and date can be displayed in three modes: hour-
minute-second, hour-minute-day-of-the-week and day-month-year.
Press the MODE button to change from one mode to the other.
Pressing the ALARM button during any of these modes will display
the alarm time instead. Another press will activate or deactivate the
alarm. To go back to normal time and date display, press MODE.
ABOUT RADIO RECEPTION
The BAR928 is designed to automatically synchronize its calendar
clock once it is brought within range of the Frankfurt DCF77 radio
signal. It will scan and adjust every full hour.
When the BAR928 is within range, its radio-control mechanism will
override all manual settings.
When the unit is receiving radio signal, the RADIO RECEPTION
signal will start to blink. A complete reception generally takes about
two to 10 minutes, depending on the strength of the radio signal.
When the reception is complete, the RADIO RECEPTION signal
will stop blinking. The strength of the reception for the last full hour
will be indicated.
For better reception, place the clock away from metal objects and
electrical appliances to minimize interference.
Should you wish to deactivate the RF controlled function, press
MODE and DOWN( ) button simultaneously.
To reactivate the RF control function, press MODE and UP( )
simultaneously.
HOW TO SET THE CLOCK MANUALLY
When the current time is displayed, press MODE for three seconds.
The 12-hr or 24-hr digits will flash. Use the UP or DOWN button to
select either. If 12-hour clock format is selected, the time will be
displayed with the AM or PM indicator.
Press MODE. The hour digits will flash. Use the UP or DOWN
buttons to enter the hours. Holding down either button will increase
or decrease the value rapidly. Press MODE to go to the minutes. Set
the minutes like you set the hours. Press MODE again to confirm
and exit.
If changes are made during this process, the seconds will start from
zeros.
ABOUT ALTITUDE SETTING
For a correct reading of the local barometric pressure, select 0 for
altitude compensation reading while setting the calendar. (See
HOW TO SET THE CALENDAR for details.)
For users staying at a higher altitude, such as in the mountain area,
sea level barometric pressure applies. In this case, select -100 to
2500 meters, whichever appropriate, when entering the altitude
compensation reading.
HOW TO SET THE CALENDAR
MANUALLY
•When the calendar is displayed, press MODE for three seconds.
The altitude compensation reading on the atmospheric pressure
window will flash. Use the UP or DOWN button to enter the
desired value. (See ABOUT ALTITUDE SETTING for more
information.)
•Press MODE. The year digits will flash. Enter the year using the
UP or DOWN button.
•Press MODE. The D or M indicator will flash. Use the UP or
DOWN button to select D for day-month display or M for
month-day display.
•Press MODE and follow the same procedure to set the month and
day-of-the-month.
•Press MODE. The E, I, D, F or S language indicator will flash.
Use the UP or DOWN button to select E for English, I for Italian,
D for German, F for French or S for Spanish.
•Press MODE. The day-of-the-week will flash. Use the UP or
DOWN button to enter the day and press MODE again to
confirm and exit.
-
Strong
-
Weak
-
No signal
-
Receiving
Specyfikacje produktu
| Marka: | Oregon Scientific |
| Kategoria: | elektroniczna stacja pogody |
| Model: | BAR928 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Oregon Scientific BAR928, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje elektroniczna stacja pogody Oregon Scientific
25 Maja 2024
24 Maja 2024
23 Maja 2024
23 Maja 2024
21 Maja 2024
19 Maja 2024
19 Maja 2024
18 Maja 2024
17 Maja 2024
17 Maja 2024
Instrukcje elektroniczna stacja pogody
- elektroniczna stacja pogody Nedis
- elektroniczna stacja pogody Marquant
- elektroniczna stacja pogody Hyundai
- elektroniczna stacja pogody Honeywell
- elektroniczna stacja pogody ECG
- elektroniczna stacja pogody TFA
- elektroniczna stacja pogody Medisana
- elektroniczna stacja pogody Auriol
- elektroniczna stacja pogody Lowrance
- elektroniczna stacja pogody Techno Line
- elektroniczna stacja pogody Daikin
- elektroniczna stacja pogody Renkforce
- elektroniczna stacja pogody La Crosse Technology
- elektroniczna stacja pogody Fluke
- elektroniczna stacja pogody GoGen
- elektroniczna stacja pogody Bresser
- elektroniczna stacja pogody Hama
- elektroniczna stacja pogody Lexibook
- elektroniczna stacja pogody Eurochron
- elektroniczna stacja pogody Sencor
- elektroniczna stacja pogody Alecto
- elektroniczna stacja pogody EVE
- elektroniczna stacja pogody Cotech
- elektroniczna stacja pogody Vitek
- elektroniczna stacja pogody Clas Ohlson
- elektroniczna stacja pogody OBH Nordica
- elektroniczna stacja pogody Rebel
- elektroniczna stacja pogody Bearware
Najnowsze instrukcje dla elektroniczna stacja pogody
4 Października 2024
4 Października 2024
21 Września 2024
21 Września 2024
21 Września 2024
2 Września 2024
1 Września 2024
1 Września 2024
1 Września 2024
22 Sierpnia 2024