Instrukcja obsługi One For All Simple 4 URC 6440

One For All Zdalne sterowanie Simple 4 URC 6440

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla One For All Simple 4 URC 6440 (41 stron) w kategorii Zdalne sterowanie. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/41
Instruction
Manual
&
Code
List
URC-6440
English
Deutsch
English
Ελληνική
Русский
Türkçe
Nederlands
Magyar
Polski
Česky
Français
Italiano
Español
Portugu
ê
s
Dansk
Norsk
Svenska
Suomi
Nederlands
Magyar
Polski
Česky
Code List
More information
Weitere informationen
www.ofa.com/urc6440
English:
Deutsch:
Samsung
User Guide
URC-6440 708791 RDN-1230712
GB IRL
D
Push here
to open
AAA
AAA
21
4
A) Gently push and slide
back the battery cover to open.
C) After inserting the batteries, the
TV key should be blinking every 3
seconds. If NOT please press and
release any key.
B) Insert 2 new AAA batteries.
In order to set up your remote as easily as possible, it is equipped with Region Setting which will configure the
“Brand-Set-List (see SimpleSet) specifically to your Region (e.g GB/IRL).
D) Press and hold for 3 seconds to select the brand-configuration for ( GB ) or (IRL). The TV LED will blink twice.
ATTENTION: If you live outside of Great Britain or Ireland please make sure to press and hold the DIGIT - that
corresponds your specific Region – for 3 seconds. If your Region is NOT listed please press and hold the “DIGIT 6”
for 3 seconds and follow one of the “8-language” manuals.
Great Britain / Ireland
Deutschland
France
España
Italia
All other countries
GB IRL
D
F
E
I
3 sec.
PVR
Digital TV
Receiver
Satellite /
Cablebox
Set-Top-Box,
Freeview and
all SKY
DVD player /
DVD-R /
Blu-ray
TV
Television /
LED / Plasma /
LCD / Projector
or
TV with build-in
Digital receiver
SimpleSet
SimpleSet Brandset list GB / IRL
Batteries
Region Setting
3 sec.
2. Press and hold “Setup” for 3 seconds.
The LED will blink twice.
1. Make sure your TV
is switched on.
4. Press and hold the “DIGIT KEY assigned to your brand” (e.g. “Digit 9” for a Samsung TV) until your device switches
OFF. Release the “DIGIT key” as soon as your device switches OFF. READY !
If your device does NOT switch OFF, please repeat steps 2, 3 and 4.
3. Select the device key (e.g.
TV ) for the device type
you wish to control.
RESET - COUNTRY SETTING
If by mistake you selected the wrong “digit” (and therefore the wrong Region) it is possible to reset this;
1) Press and hold “Setup” until the TV LED blinks twice.
2) Press and release “POWER”.
3) Press and hold the “digit that corresponds your Region” (e.g. 1 for GB/IRL) for 3 seconds.
Samsung
Samsung
e.g. Samsung TV
Acer / Hitachi
Alba / Bush / goodmans / Matsui / Technika
Brandt / Ferguson / Nordmende / Saba /
TCL / Telefunken / Thomson
Grundig
JVC / Sharp
LG
Panasonic / Sony
Philips
Samsung
Toshiba
Alba / Bush / Digihome, Durabrand /
Goodmans
Amstrad / BSkyB / Sky / Sony
Philips / BT Vision / Pace
Dream Multimedia / Fortec Star /
Technomate / Topfield
Thomson / Ferguson
Grundig / Matsui / Technika / Tvonics /
Wharfedale
Humax
Sagem / Sagemcom
Samsung
Virgin Media
Alba / Bush / Sharp
Denon / JVC
LG / Microsoft
Medion / Tevion / Technika
Toshiba / Onkyo
Panasonic
Philips / Yamaha
Pioneer
Samsung
Sony
Problems & Solutions SimpleSet
Your device still does NOT switch OFF? Follow the “Direct Code Set” instructions or try Auto Search.
Your device switched OFF but you still cannot control your device? Switch your device back ON manually (or
using the original remote) and repeat SimpleSet making sure to release the “digit assigned to your brand” as soon as
your device switches OFF.
Your ONE FOR ALL controls your device but some keys don’t work properly? There may be a better configuration
for your brand. Please repeat SimpleSet making sure to release the “digit assigned to your brand” as soon as your de-
vice switches OFF or go to www.simpleset.com
3
A B C E
YES:
NO:
max. 60 seconds
siehe Rückseite
D
INT
More information
Weitere informationen
www.ofa.com/urc6440
DVD
Tuner /
Amplifier /
Audio
Bose / Samsung
Denon
Harman/Kardon
JVC / LG
Marantz / Philips
NAD / Onkyo
Panasonic / Technics
Pioneer
Sony
Yamaha
EXTRA
Is your device brand listed (see SimpleSet Brand List)?
Remember the digit assigned to your brand and follow steps 1, 2, 3 and 4 from SimpleSet.
Find your brand in the Code List and follow the Direct Code Set Instructions or find your brand at
“www.simpleset.com”. You may also follow the “Auto Search” if your brand is NOT listed at all.
URC-6440
The keys light up when you pick up the remote.
To deactivate this:
1) Press and hold “setup” for 3 seconds.
The LED will blink twice.
2) Press and release “pause”. The LED will blink 4 times.
Result: the keys will only light up when you press a key.
To re-activate this:
1) Press and hold “setup” for 3 seconds. The LED will blink
twice.
2) Press and release “pause”. The LED will blink twice.
Bennett Bennett
Auto Search - if “Direct Code Set” is NOT successful
max. 20
minutes
Problems & Solutions Direct Code Set
Your ONE FOR ALL controls your device but some keys don’t work properly? There may be a better configuration
for your brand. Please repeat the Direct Code Set instructions with the next code listed for your brand.
If still NOT successful? Follow the Auto Search instructions or go to www.simpleset.com
1 2
3 sec.
3. Example: How to copy the “I/II (mono/stereo)“ function from your original remote onto the “red key” on your
ONE FOR ALL URC-6440 remote control. Place both remote controls on a flat surface. Make sure that the ends
you normally point at your device are facing each other.
2. Select the device key (e.g. TV) for the device type
you wish to copy.
Copy
2 - 5 cm
Original remoteURC-6440
Align both remotes also in height
1. Press and hold “Copy” for 3 seconds.
The LED will blink twice.
3
2 - 5 cm
First; Press the ”red” key.
the LED will flash rapisly!
then; Press the ”I/II” key.
4. Press and hold the “Copy” key for 3 seconds to exit the
Copy feature. The LED will light up twice. READY!
CombiControl
= Control
= Control
= Control
TV
PVR
DVD
= Control +
= Control +
PVR
DVD
CombiControl allows you to to control 2 devices without having to select the corresponding device key. The functio-
nality of the two devices will be logically divided on the ONE FOR ALL keypad. CombiControl requires no additional
set up and will work automatically as soon as you set up at least 2 devices (e.g. a TV and a PVR).
Simply press “ (= Setup key)” and the keypad will be configured as follows;watch tv
• AV, MUTE and VOLUME +/- keys = control your TV.
• ALL OTHER available keys = control your PVR.
• POWER (pressed for 3 seconds) = will send POWER signal to TV and PVR.
If additionally you also did set up a DVD (or Blu-ray) player on the DVD key; simply press “watch movie (= Copy key)”
and the keypad will be configured as follows;
• AV, MUTE and VOLUME +/- keys = control your TV.
• ALL OTHER available keys = control your DVD (or Blu-ray) player.
• POWER (pressed for 3 seconds) = will send POWER signal to TV and DVD.
TV
TV
www.simpleset.com
New models and even brands are being launched every day. Fortunately your ONE FOR ALL remote can be updated
via the internet, ensuring it will never become obsolete. For access to over 6,000 brands and 300,000 models, please
visit our SimpleSet Online tool at www.simpleset.com
Direct Code Set - if “SimpleSet” is NOT successful
3 sec.
23
4. Enter the first 4-digit code listed
for your brand (e.g. 0556 for a
Bennett TV). The LED will blink
twice.
2. Press and hold the “Setup” key for
3 seconds. The LED will blink
twice.
3. Select the device key (e.g. TV) for
the device type you wish to
control.
1. Find the code for your device in the included Code list. Codes are listed by device type and brand name.
The most popular code is listed first. Make sure your device is switched on (not on standby).
5. Now, aim the ONE FOR ALL at
your device and press POWER. If
your device switches OFF it
should be ready to operate your
device.
6. If your device does NOT switch
OFF? Please repeat the Direct
Code Set instructions with the
next code listed for your brand.
5
Problems & Solutions Auto Search
Your device switched OFF but you still cannot control your device? Switch your device back ON manually (or
using the original remote) and repeat Auto Search making sure to press and release OK as soon as your device swit-
ches OFF.
Your ONE FOR ALL controls your device but some keys don’t work properly? There may be a better configuration
for your brand. Please repeat Auto Search. Auto Search will select the next configuration for your brand. Make sure to
press and release OK as soon as your device switches OFF or go to www.simpleset.com
4
The Learning feature allows you to Learn (Copy) one or more functions from your original (working) remote control
onto your ONE FOR ALL remote.
• If you want to copy other functions, simply repeat step 3 for each key you want to copy.
• If you get a long blink, please repeat step 3.
• You can copy onto every key except the “Copy” key and “Device” keys (you will get a long blink).
How to delete a COPIED function
1) Press and hold “Copy” for 3 seconds. The LED will blink twice.
2) Select corresponding device key.
3) Press the corresponding key (e.g. red key) you wish to delete for 3 seconds until the LED’s blink twice.
4) Press and hold “Copy” for 3 seconds. The LED will blink twice.
Samsung
Samsung
2
1
3 sec.
Samsung
3
2. Press and hold “Setup” for 3 seconds.
The LED will blink twice.
1. Make sure your TV
is switched on.
3. Select the device key (e.g.
TV ) for the device type
you wish to control.
5. Point the remote at your device. Now the remote will send a different
POWER OFF signal (automatically every 3 seconds) going through all the
brands stored in the memory. Press and release OK as soon as your device
switches OFF. READY!
4. Press and release OK.
45
“watch tv”
“watch movie”
= POWER
= “watch tv” - see CombiControl
= Enter “Setup” mode (when pressed & held for 3 seconds)
= “watch movie” - see CombiControl
= Enter “Copy” mode (when pressed & held for 3 seconds)
= BACK
= SKIP FORWARD
= FAST FORWARD (when pressed & held briefly)
= SKIP BACK
= REWIND (when pressed & held briefly)
= In TV Mode, text off
Keypad
Bennett
e.g. Bennett TV
1
4
3 sec.

Specyfikacje produktu

Marka: One For All
Kategoria: Zdalne sterowanie
Model: Simple 4 URC 6440

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z One For All Simple 4 URC 6440, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Zdalne sterowanie One For All

One For All

One For All URC 7935 Instrukcja

14 Stycznia 2025
One For All

One For All Essence 4 KE1242 Instrukcja

14 Grudnia 2024
One For All

One For All Smart Control Pro URC 7966 Instrukcja

28 Września 2024
One For All

One For All Essence TV URC 1211 Instrukcja

22 Września 2024
One For All

One For All Essence 4 URC 1241 Instrukcja

21 Września 2024
One For All

One For All Essence 8 URC 1281 Instrukcja

20 Września 2024
One For All

One For All Smart Control PS3 URC 7965 Instrukcja

19 Września 2024
One For All

One For All URC 1000 Instrukcja

17 Września 2024
One For All

One For All Smart Zapper Instrukcja

16 Września 2024
One For All

One For All KE1916 Instrukcja

12 Września 2024

Instrukcje Zdalne sterowanie

Najnowsze instrukcje dla Zdalne sterowanie

Panasonic

Panasonic EUR7502XC0EG Instrukcja

15 Stycznia 2025
Delta

Delta GT 9000 Instrukcja

15 Stycznia 2025
Eminent

Eminent EM1041 Instrukcja

15 Stycznia 2025
Sonos

Sonos Controller for Android-smartphones Instrukcja

15 Stycznia 2025
Sonos

Sonos Controller voor Mac of pc Instrukcja

14 Stycznia 2025
Sonos

Sonos Controller for Android Tablets Instrukcja

14 Stycznia 2025
Sonos

Sonos Controller for iPad Instrukcja

14 Stycznia 2025
Meliconi

Meliconi fully 8 Instrukcja

12 Stycznia 2025
SilverCrest

SilverCrest KH 2155 Instrukcja

12 Stycznia 2025
Hama

Hama Spot-Pointer V2 Instrukcja

11 Stycznia 2025