Instrukcja obsługi Nxg NX-PRO1000

Nxg subwoofer NX-PRO1000

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Nxg NX-PRO1000 (2 stron) w kategorii subwoofer. Ta instrukcja była pomocna dla 8 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/2

Where to Place Your Rock Speakers

The NX-PRO1000 rock speaker is designed to be placed

directly on the ground in your landscape, on a deck, or

patio. Since it imitates naturally occurring rocks, it blends

in best if placed near other rocks and among bushes,

plants and other landscape settings. When determining

placement you should first consider the ease of running

your speaker wire from the amplifier location to each

speaker and the sound coverage area you desire from

each speaker. (Note: Do not place speakers in a low-lying

area where water may accumulate since they are not

designed to be submersed in water.) If possible, try to

place the within - feet NX-PRO1000 8 10 of your

main/satellite speakers. If it is too far away, the sound

from the NX-PRO1000 will not blend well with the

main/satellite speakers. We recommend using one NX-

PRO1000 for every two main/satellite speakers you have

and try to locate each one in the vicinity of the main/satel-

lite speakers as shown in Figs. 2 and 3. Although sub-

woofer frequencies are mostly omni-directional, we recom-

mend facing the NX-PRO1000 grille toward the listening

area for best sound.

If you plan to use more than one NX-PRO1000 to cover a

large area, we recommend you consult your receiver/ampli-

fier owner anual to determine how many 8 ohm speak-’s m

ers can be connected to each channel of its outputs. Most

receivers are only rated for one 8 ohm speaker per channel.

If you need to use more than one NX-PRO1000, we rec-

ommend using an impedance matching speaker selector or

a impedance matching volume control such as the NX-

VM80. Using one of these impedance matching devices will

assure the safe operation of your amplifier if multiple pairs

of speakers are being used. (See Fig. 3 on reverse.)

Tools & Materials Required for Installation

Wire strippers

Spade or trenching tool/shovel

Hacksaw or pipe cutter

PVC conduit, cleaner, glue, & cutting tool (optional)

Tube of silicone sealant

Direct burial rated speaker cable with polarity marking

on the cable

16AWG minimum for cable runs up to 70 feet

14AWG for cable runs of 70 - 120 feet

12AWG for cable runs of 120 - 170 feet

Running the Speaker Cable and Connecting the Speaker

If you chose to bury your speaker wires, we recommend you first consult your

local utility companies (phone, electric, cable TV, gas, water, or other applica-

ble organizations) for any buried cables or utility line locations before you

begin to dig. You may also need to consult your local building and electrical

codes for any applicable requirements.

Once you have determined the desired location of your main speakers and

NX-PRO1000 where any buried obstructions may exist, you can dig the trench

for your wires. Lay your cables on top of the ground along the path you have

determined to each speaker. If not using conduit, you may dig a narrow trench

or slit the ground below the grass line along the wire path and tuck the wires

in. If you are using conduit, size and cut it to fit the trench first. Then assem-

ble the conduit and associated parts with PVC cleaner and glue according to

the manufacturer’s instructions. Pull the speaker cables through the conduit

and lay the conduit into the trench. In either installation style, make sure to

leave approximately 2 or 3 feet of extra cable per channel under the speaker

in case you need to adjust its location later.

FIG. 2

Congratulations on choosing your NX-PRO1000 rock speaker subwoofer. Like all NXG products,

great care has been taken in its design. Their combination of advanced engineering and state-

of-the-art materials will provide you with years of listening pleasure. The NX-PRO1000 speaker

was designed to appear like naturally occurring landscape ocks. The ealistic ock-like shaper r r

and the availability of two natural colors (Granite & Sandstone) allows it to blend into almost

any outdoor environment allowing you to create a natural looking outdoor audio solution. eforB e

you get started, it’s a good idea to identify all the parts and hardware (See Fig 1).

FIG. 1

Rock Speaker

Subwoofer

Pigtail

Connecting

Wires

4 Wire

Nuts

Main

Speaker

Locations

Examples

of Speaker

Coverage Areas

(Continued on reverse)

2 Speakers

4 Speakers

OWNER’S MANUAL

NX-PRO1000 10˝ Dual Voice Coil,

Weather-Resistant Rock Speaker Subwoofer

Main

Speakers

Main

Speakers

NX-PRO1000

NXG Speaker Systems are designed to the highest possible value and performance

standards. Our confidence in their quality is such that NXG Technology offers cus-

tomers this transferable limited warranty:

NXG Speaker System Two-Year Limited rrantyWa

If the NXG speaker system proves to be defective in workmanship or materials within

two years from the date of the original customer purchase, we will, at our option,’s

repair or replace the defective product.

DISCLAIMER

THE WARRANTY STATED HEREIN IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR

IMPLIED, INCLUDING MERCHANTABILITY AND FITNESS FOR CULAR PARTI

PURPOSE AND ALL OTHER LIABILITIES AND OBLIGATIONS OF NXG TECHNOLOGY, ALL

OF WHICH ARE EXPRESSLY DISCLAIMED. NXG TECHNOLOGY HAS NOT MADE AND

DOES NOT HEREBY MAKE ANY OTHER REPRESENTATION, WARRANTY OR COVENANT

WITH RESPECT TO THE CONDITION, QUALITY, DURABILITY, DESIGN, OPERATION,

CAPACITY, FITNESS FOR USE OR SUITABILITY OF THE NXG SPEAKER SYSTEMS.

Exclusion of Certain Damages

NXG Technology’s liability for any defective product is limited to repair or replacement

of product at our option. NXG Technology shall not be liable for incidental

or consequential damages of any kind or character because of product defects.

Some states do not allow limitations on how long an implied warranty lasts and/or

do not allow the exclusion or limitation of incidental or consequential damages, so

the above limitations and exclusions may not apply.

This rranty Does Not Cover:Wa

• Damage caused by abuse, accident, misuse, negligence, or

improper operation.

• Any product whose serial number has been altered, defaced,

or removed.

• Products that have been altered or modified.

• Normal wear and maintenance.

• Damages caused by shipping. (All claims for shipping damage

must be made with the carrie )r.

Warranty Service

Warranty service must be performed by an authorized service center,

usually an NXG speaker systems dealer or its authorized agent. All

warranty repairs must be accompanied by the original bill of sales. No

other document is acceptable or is required. This warranty gives you

specific legal rights, and you may also have other rights which vary

from state to state.

NXG reserves the right to revise speaker system specifications without notice.

16648 North 94th Street • Scottsdale, AZ 85260

1-800-733-0008 www.nxgtech .comnology

(Continued from front) See Fig. 4 for speaker connection detail

• Strip the outer jacket from each end of both cables about 3 inches and expose the two

insulated conductors.

• Strip 1/2˝ of insulation from the end of each conductor.

• Twist the positive wire to the Red wire and the negative wire to the Black wire of the

NX-PRO1000 speaker. (Note: o inputs for the NX-PRO1000 speaker must be connectedTw

to the main speaker wires.)

• Make sure the two connections do not touch each other for the next step

• Connect the positive and negative wires to your receiver/amplifier left and right channels,

in parallel with the main speaker wires, maintaining proper polarity as described in your

receiver/amplifier’s manual.

• Now turn your eceiver/amplifier on, making sure the volume control is turned down and that the r

balance control is in the center position. Activate a musical source such as FM or a CD player.

Gently turn up the volume until you hear sound coming from your new NX-PRO1000 rock speak-

ers. If everything is working properl turn the amplifier off and skip down to the next paragraph.y,

If no sound is heard from any or all speakers, switch off the receiver/amplifier immediately and

check for open or loose connections, wrong polarity or shorts, or improper source selection.

• Place wire nuts on each of the speaker connections and fill them with silicone (not supplied)

to prevent corrosion after the wire is buried. Use silicone to seal the cable path through any

walls or other structures. You can now fill in the cable trench with the dirt you removed, and

start to enjoy your new outdoor sound system.

FIG. 3. Typical System with local volume control

Receiver

3/4˝ PVC Conduit

NX-VM80 Volume

Control in NX-OVC

Outdoor Enclosure

House

NX-PRO1000

Rock Speaker

Subwoofer

Specifications

Power Handling: 10 - 150 Watts/channel

Efficiency: 90dB @ 1watt/1 meter

Frequency Response: 35 Hz - 150 Hz

(internal low-pass crossover limited)

Driver Complement:

10˝ (254mm) dual voice coil, fiberglass

cone woofer with rubber surround

Nominal Impedance: 8 ohms/channel

Connection: 2 - 24˝ Two-Conductor Pig ilsTa

Enclosure: Silicone sealed, glass-reinforced,

cast resin

Grille: Color matched aluminum

Overall Dimensions: 21˝ (535mm) W x

181/2˝ (470mm) H x 133/4˝ (350mm) D

Available Colors: Granite & Sandstone

FIG. 4 - Speaker Connection

(ONE Channel Shown)

Note: Once wires have

been twisted together

and wire nuts screwed

on, fill inside of wire

nut and cover exposed

bare wire with

silicone sealant.

Install wire nuts

on twisted wiresTwist wires

together

as shown

(+) Red

(–) Black

To Rock

Speaker

From

Receiver

Note: Aim front (grille)

of rock speaker toward

listening area.

House-Mounted

Outdoor Speaker

Specyfikacje produktu

Marka:	Nxg
Kategoria:	subwoofer
Model:	NX-PRO1000

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Nxg NX-PRO1000, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje subwoofer Nxg

Nxg NX-PRO1000 Instrukcja

22 Września 2024

Instrukcje subwoofer

Najnowsze instrukcje dla subwoofer

JL Audio SGR-10TW3 Instrukcja

13 Października 2024

Teufel T6 Instrukcja

13 Października 2024

Polk DB1040 Instrukcja

10 Października 2024

OSD Audio NERO DUAL X8 Instrukcja

9 Października 2024

OSD Audio NERO WSA Instrukcja

9 Października 2024

Kicker 51CWQ102 Instrukcja

9 Października 2024

Kicker 51CWQ122 Instrukcja

9 Października 2024

Kicker 43C84 Instrukcja

9 Października 2024

Kicker 51CWQ124 Instrukcja

9 Października 2024

OSD Audio FS12 Instrukcja

9 Października 2024