Instrukcja obsługi Nxg NX-AW5

Nxg głośnik NX-AW5

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Nxg NX-AW5 (2 stron) w kategorii głośnik. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/2

Congratulations on the purchase of your new all-weather speakers. At NXG Technology,

we strive to offer products that are durable, functional, and above all else – speakers that

produce great audio. Like all NXG products, our all-weather speaker line has evolved

from hours of rigorous testing by our engineers and customers and were designed to pro-

vide you with years of great sound, whether in your den, backyard or on your boat. Please

take a moment to to review the installation instructions to ensure that you get the most

from your new speakers.

Unpacking

Carefully remove your new NXG speakers from the box. Inspect the speakers for transit

damage. If you discover damage, contact your dealer immediately. Save your carton – it is the

best possible protection for your speakers should you ever have a need to move them.

Positioning and Mounting Your New NXG Speakers

Note: the distance between yourself and the point directly between the speakers should be

(roughly 20%) greater than the distance between the two speakers. Outside placement may

be different, due to variances in available mounting areas.

1/4– 20 threaded

brass inserts accept

universal style

mounting hardware

(not included).

Negative (Black)

Input Binding Post

CORRECT IN-PHASE HOOK-UP

FIGURE 1

FIGURE 2

All NXG weather-resistant speakers are equipped with

powder-coated ratcheting aluminum mounting brackets

that allow for vertical or horizontal mounting. Be certain

the type of anchor you choose, and the material you

are mounting the anchor into, are capable of holding

the weight of the speaker. (Many mounting anchor sys-

tems are available from your local hardware store.)

After mounting the bracket, connect the wire as shown

in Figure 2, and loosely secure the speaker to the

bracket using the supplied knobs. Adjust the speaker’s

angle for optimum listening area coverage and firmly

hand-tighten the knobs.

Hooking Up Your

New NXG Speakers

STOP! – Make sure that you consult your amplifier’s

owner’s manual regarding speaker hook-up. Your ampli-

fier should be turned off throughout this procedure.

Most speaker wire is polarity coded. This means that

each conductor is labeled either (+) positive or (-) neg-

ative. The (+) positive side may be a different color or

texture than the (-) negative side. On the back of your

amplifier, each channel should be labeled (+) and (-)

as well as color coded red for (+) positive and black for

(-) negative. NXG speaker terminals are color coded

red for (+) positive and black for (-) negative. Be sure

to hook (+) to (+), (red to red), and (-) to (-), (black to

black). (See figure 3.) All connections should be tight.

Inspect connections for frays and stray strands of wire

touching both (+) and (-) terminals. (This will cause a

short and, perhaps, damage your equipment.)

Positive (Red)

Input Binding Post

To Negative Terminal

of Amplifier

To Positive Terminal of

Amplifier

Speaker wire hole Powder-coated

aluminum ratcheting

mounting bracket

BACK VIEW

Bracket knob

NX-AW4, NX-AW5, and NX-AW6

All-Weather Speakers – Outdoor/Indoor/Marine

Standard

1/4 – 20 threads

Hook up with either bare speaker wire as

large as 10 gauge or NXG banana plugs.

MODEL NX-AW4 MODEL NX-AW5 MODEL NX-AW6

4˝ 2-way Indoor/Outdoor Speaker System 5.25˝ 2-way Indoor/Outdoor Speaker System 6.5˝ 2-way Indoor/Outdoor Speaker System

Cabinet: All three models are made of weather-resistant, UV treated, high-impact ABS composite to resist sun-fade and long-term exposure to the elements.

Tweeter: 3/4˝ (19mm) ultra-wide dispersion 3/4 ˝ (19mm) ultra-wide dispersion 1˝ (25.4mm) ultra-wide dispersion

metallic anodized dome metallic anodized dome metallic anodized dome

Woofer: 4˝ (102mm) injection-molded 5.25˝ (133mm) injection-molded 6.5˝ (165mm) injection-molded

metallic anodized cone w/rubber surround metallic anodized cone w/rubber surround metallic anodized cone w/rubber surround

Frequency Response: 75 Hz-20,000 Hz 65 Hz-20,000 Hz 55 Hz-20,000 Hz

Impedance: 8 ohms nominal 8 ohms nominal 8 ohms nominal

Power Handling: 5 to 75 watts 5 to 100 watts 5 to 125 watts

Efficiency: 87 dB 89 dB 90 dB

Speaker Dimensions: 911/16 ˝ H x 6 1/2 ˝ W x 6˝ D 10 3/4 ˝ H x 6 13

/16 ˝ W x 6 5/8 ˝ D 12 7/8 ˝ H x 8˝ W x 71/4˝ D

Weight Each: 5 lbs. 5.5 lbs. 7 lbs.

Caring for Your Speakers

In outdoor applications, we recommend angling the speakers downward

as shown in Figure 1 to reduce exposure to precipitation and hot sun. If

added protection is desired, mount speakers under eaves or other shel-

ter. DO NOT immerse the speakers in water or subject them to direct

water pressure. During winter months, we recommend storing the speak-

ers indoors if you are not using them.

TO CLEAN: All NXG weather-resistant enclosures can be cleaned with

a damp soft cloth and a mild detergent. The aluminum grille can also be

cleaned with the same cloth

Troubleshooting and Service

The NXG speaker is equipped with a tweeter protection device. If

extreme power levels are reached, it will reduce the amount of power

going into the tweeter. If you detect reduced output levels from the speak-

er while playing at a high volume, it is a warning that too much power is

being applied. You must reduce the level by turning down the volume of

your receiver to a safe level or permanent speaker damage may result. It

is important to remember that no amount of protection will prevent dam-

age caused by defective equipment or extreme abuse.

If you should have a problem, first try to determine if it is indeed a

speaker problem. Determine whether the problem exists in both speakers.

If it does, the problem most likely originates in some other components in

the system. If the problem is in one speaker only, reverse your speaker

leads (left to right, right to left). If the problem moves to the other speak-

er, your problem is not in the speakers.

Once you have determined that you have a speaker problem, contact

your dealer for authorized factory service information. If you are unable to

contact your dealer, if your dealer is unable to solve your problem, or if you

have any questions or comments regarding your NXG Speaker System,

please contact us at the address or phone number below.

Specifications

NXG Speakers Two -Year Limited Warranty

If the NXG speaker system proves to be defective in workmanship or materials

within two years from the date of the original customer’s purchase, we will, at

our option, repair or replace the defective product.

Limitation of Implied Warranties

Any implied warranties, including warranties of merchantability and fitness for a

particular purpose, are limited in duration to the length of this warranty.

Exclusion of Certain Damages

NXG’s liability for any defective product is limited to repair or replacement of the

product. NXG shall not be liable for incidental or consequential damages of any

kind or character for any reason. Some states do not allow limitations on how

long an implied warranty lasts and/or do not allow the exclusion or limitation of

incidental or consequential damages, so the above limitations and exclusions

may not apply.

Warranties do not cover electrical or mechanical damage resulting from misuse

or abuse, lack of reasonable care, damage due to force majeure or natural forces,

or inadequate repairs performed by unauthorized service centers. Wear of parts

due to normal use is not covered by this warranty. Shipment of the defective item

for repair under this warranty will be at the customer's own risk and expense. This

warranty is valid for the original purchaser as the final user only.

Warranty Service

Warranty service must be performed by an authorized service center, usually an

NXG speaker systems dealer or its authorized agent. You may obtain a list of

authorized service centers by contacting NXG. All warranty repairs must be

accompanied by the original bill of

sales. No other document is accept-

able or is required. This warranty

gives you specific legal rights, and

you may also have other rights which

vary from state to state. NXG

reserves the right to revise speaker

system specifications without notice.

Scottsdale, AZ

email: nxgtechnology@gmail.com

web: nxgtechnology.com

Specyfikacje produktu

Marka:	Nxg
Kategoria:	głośnik
Model:	NX-AW5
Materiał obudowy:	Plastik
Podręcznik użytkownika:	Tak
Przeznaczenie:	Zewnętrzna
Zakres kąta nachylenia:	0 - 90 °
Typ przetwornika obrazu:	CMOS
Tryb dzienny / nocny:	Tak
Min. Oświetlenie:	0 lx
Wyjście prądu stałego (w woltach):	12
Zakres przesuwania:	0 - 360 °