Instrukcja obsługi Nokia N90

Nokia Przenośny N90

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Nokia N90 (264 stron) w kategorii Przenośny. Ta instrukcja była pomocna dla 14 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/264

DECLARATION OF CONFORMITY

We, NOKIA CORPORATION declare under our sole

responsibility that the product RM-42 is in conformity

with the provisions of the following Council Directive:

1999/5/EC. A copy of the Declaration of Conformity

can be found at http://www.nokia.com/phones/

declaration_of_conformity/

The crossed-out wheeled bin means that within the

European Union the product must be taken to separate collection at the

product end-of-life. This applies to your device but also to any

enhancements marked with this symbol. Do not dispose of these

products as unsorted municipal waste.

Reproduction, transfer, distribution or storage of part or all of the contents in this

document in any form without the prior written permission of Nokia is prohibited.

Nokia, Nokia Connecting People, and Pop-Port are trademarks or registered

trademarks of Nokia Corporation. Other product and company names mentioned

herein may be trademarks or tradenames of their respective owners.

Nokia tune is a sound mark of Nokia Corporation.

200(5). Symbian and Symbian OS are trademarks of Symbian Ltd.

Java™ and all Java-based marks are trademarks or registered trademarks of Sun

Microsystems, Inc.

or more U.S. Patents: No. 4701745, 5016009, 5126739, 5146221, and 5414425.

Other patents pending.

5016009, 5126739, 5146221, and 5414425. Other patents pending.

US Patent No 5818437 and other pending patents. T9 text input software Copyright

MPEG-4

This product is licensed under the MPEG-4 Visual Patent Portfolio License (i) for

personal and noncommercial use in connection with information which has been

encoded in compliance with the MPEG-4 Visual Standard by a consumer engaged

in a personal and noncommercial activity and (ii) for use in connection with

MPEG-4 video provided by a licensed video provider. No license is granted or shall

be implied for any other use. Additional information including that relating to

promotional, internal and commercial uses may be obtained from MPEG LA, LLC.

See <http://www.mpegla.com>.

Nokia operates a policy of continuous development. Nokia reserves the right to

make changes and improvements to any of the products described in this document

without prior notice.

Under no circumstances shall Nokia be responsible for any loss of data or income

or any special, incidental, consequential or indirect damages howsoever caused.

The contents of this document are provided ‘as is’. Except as required by applicable

law, no warranties of any kind, either express or implied, including, but not limited

to, the implied warranties of merchantability and fitness for a particular purpose,

are made in relation to the accuracy, reliability or contents of this document. Nokia

reserves the right to revise this document or withdraw it at any time without prior

notice.

The availability of particular products may vary by region. Please check with the

Nokia dealer nearest to you.

Export Controls

This device may contain commodities, technology or software subject to export

laws and regulations from the US and other countries. Diversion contrary to law is

prohibited.

FCC / INDUSTRY CANADA NOTICE

Your device may cause TV or radio interference (for example, when using a

telephone in close proximity to receiving equipment). The FCC or Industry Canada

can require you to stop using your telephone if such interference cannot be

eliminated. If you require assistance, contact your local service facility. This device

complies with part 15 of the FCC rules. Operation is subject to the condition that

this device does not cause harmful interference.

ISSUE 2 EN, 9238525

Contents

For your safety...........................................9

Your Nokia N90.......................................12

Modes..................................................................................... 12

Fold open mode ...........................................................12

Fold closed mode......................................................... 12

Imaging mode .............................................................. 13

Camera mode ...............................................................14

Essential indicators............................................................. 14

Attach the wrist strap ....................................................... 15

Configure settings ..............................................................15

Nokia support on the Web ...............................................15

Help.........................................................................................15

Clock.......................................................................................16

Clock settings ...............................................................16

World clock................................................................... 17

Volume and loudspeaker control.................................... 17

File manager......................................................................... 17

View memory consumption......................................18

Memory low—free memory ...................................... 18

Memory card tool ............................................................... 19

Format a memory card .............................................. 20

Useful shortcuts .................................................................. 20

Personalise your device...........................22

Profiles—Set tones ..............................................................23

Offline profile...............................................................23

Transfer content from another device ..........................24

Change the look of your device...................................... 24

Active standby mode.................. .................................. ......25

Make calls ................................................27

Voice calls .............................................................................27

Make a conference call..............................................27

Speed dial a phone number......................................28

Voice dialling........................ .................................. ......28

Video calls .............................................................................29

Video sharing ...................................................................... 30

Video sharing requirements .....................................30

Settings .......................................................................... 31

Share video....................................................................31

Accept an invitation...................................................33

Answer or reject a call.......................................................33

Answer or reject a video call....................................33

Call waiting .................................................................. 34

Options during a voice call.......................................34

Options during a video call.......................................35

Log ...........................................................................................35

Recent calls ..................................................................35

Call duration .................................................................35

Packet data....................................................................36

Monitor all communication events........................36

Contacts (Phonebook) ............................ 38

Save names and numbers .................................................38

Default numbers and addresses...............................39

Copy contacts.......................................................................39

SIM directory and other SIM services....................40

Add ringing tones for contacts........................................40

Create contact groups........................................................40

Remove members from a group ..............................41

Camera and Gallery ................................ 42

Camera ...................................................................................42

Take pictures in the Imaging mode ........................42

Take pictures in the Camera mode.........................47

Edit images ....................................................................48

Tips on taking good photographs............................49

Record videos................................................................50

Edit video clips .............................................................52

Gallery.....................................................................................55

View images and video clips .................................... 55

Albums............................................................................ 56

Imaging.....................................................57

Image print ...........................................................................57

Printer selection...........................................................57

Print preview.................................................................57

Print settings ................................................................ 57

RealPlayer™........................................................................... 58

Play video or sound clips........................................... 58

Create a track list........................................................59

Stream content over the air.....................................59

Receive RealPlayer settings......................................59

Movie Director.....................................................................60

Create a quick muvee.................................................60

Create a custom muvee.............................................61

Settings .......................................................................... 62

Messaging.................................................63

Write text.............................................................................. 64

Traditional text input .................................................64

Predictive text input—Dictionary............................64

Copy text to clipboard ...............................................66

Write and send messages .................................................66

Receive MMS and e-mail settings.......................... 68

Inbox—receive messages...................................................69

Multimedia messages ................................................ 69

Data and settings........................................................69

Web service messages ...............................................70

My folders ............................................ ....................... .........70

Mailbox............................ .................................. .................... 70

Open the mailbox........................................................ 70

Retrieve e-mail messages.........................................71

Delete e-mail messages.............................................72

Disconnect from the mailbox ..................................72

Outbox—messages waiting to be sent..........................73

View messages on a SIM card.........................................73

Messaging settings............................................................. 73

Text messages ..............................................................73

Multimedia messages ................................................ 74

E-mail.............................................................................75

Web service messages ...............................................77

Cell broadcast...............................................................77

Other settings............................................................... 77

Calendar....................................................79

Create calendar entries.....................................................79

Set a calendar alarm ..................................................80

Calendar views.....................................................................80

Remove calendar entries...................................................80

Calendar settings................................................................ 80

Web...........................................................81

Access the Web ...................................................................81

Receive browser settings...........................................81

Enter the settings manually.....................................81

Bookmarks view...................................................................82

Add bookmarks manually..........................................82

Send bookmarks...........................................................82

Make a connection.............................................................82

Connection security....................................................83

Browse....................................................................................83

View saved pages ........................................................84

Download and purchase items........................................84

End a connection ................................................................85

Empty the cache..........................................................85

Web settings.........................................................................85

Office........................................................87

Calculator..............................................................................87

Calculate percentages................................................87

Converter...............................................................................87

Set base currency and exchange rates..................88

To-do ......................................................................................88

Create a task list..........................................................88

Notes ......................................................................................88

Recorder.................................................................................89

My own.................................................... 90

Go to—add shortcuts..........................................................90

Delete a shortcut.........................................................90

IM—Instant messaging (chat) .........................................90

Receive IM settings.....................................................91

Connect to an IM server............................................91

Modify your IM settings ............................................91

Search for IM groups and users...............................92

Join and leave an IM group ......................................92

Chat .................................................................................92

View and start conversations...................................93

IM contacts ...................................................................94

Manage IM groups......................................................94

Administrate an IM group.........................................95

Chat server settings ....................................................95

Connectivity ............................................ 97

Bluetooth connection . .. . . .. . . . .. . . . .. . . . .. . . . .. . . .. ..97. . . . . . . . . . . . . . . . . . . . . . . .

Bluetooth connection settings.................................98

Send data using a Bluetooth connection .............98

Pair devices....................................................................99

Receive data using a Bluetooth connection..... 100

Switch off Bluetooth connectivity....................... 100

PC connections.................................................................. 100

CD-ROM ...................................................................... 100

Your device as a modem .........................................100

Connection manager........................................................101

View data connection details ................................101

Remote synchronisation..................................................102

Create a new synchronisation profile..................102

Synchronise data .......................................................103

Device manager.................................................................103

Server profile settings..............................................104

Tools....................................................... 105

Settings................................................................................105

Phone settings............................................................105

Call settings ................................................................106

Connection settings..................................................107

Date and time.............................................................110

Security ........................................................................110

Call diverting ..............................................................113

Call barring ................................................................113

Network........................................................................113

Enhancement settings..............................................114

Cover display settings......................................................114

Voice commands ........................ .................................. .....114

Application manager........................................................115

Install applications and software .........................115

Remove applications and software......................117

Application settings..................................................117

Activation keys—handle copyright-protected files .117

Troubleshooting .................................... 119

Q&A.......................................................................................119

Battery information ............................. 122

Charging and discharging...............................................122

Nokia battery authentication guidelines ...................122

Care and maintenance ......................... 124

Additional safety information............. 125

Index ...................................................... 129

For your safety

Read these simple guidelines. Not following them may be

dangerous or illegal. Read the complete user guide for

further information.

SWITCH ON SAFELY Do not switch the phone

on when wireless phone use is prohibited or

when it may cause interference or danger.

ROAD SAFETY COMES FIRST Obey all local

laws. Always keep your hands free to operate

the vehicle while driving. Your first

consideration while driving should be road

safety.

INTERFERENCE All wireless phones may be

susceptible to interference, which could affect

performance.

SWITCH OFF IN HOSPITALS Follow any

restrictions. Switch the phone off near medical

equipment.

SWITCH OFF IN AIRCRAFT Follow any

restrictions. Wireless devices can cause

interference in aircraft.

SWITCH OFF WHEN REFUELING Do not use

the phone at a refuelling point. Do not use

near fuel or chemicals.

SWITCH OFF NEAR BLASTING Follow any

restrictions. Do not use the phone where

blasting is in progress.

USE SENSIBLY Use only in the normal

position as explained in the product

documentation. Do not touch the antenna

unnecessarily.

QUALIFIED SERVICE Only qualified personnel

may install or repair this product.

ENHANCEMENTS AND BATTERIES Use only

approved enhancements and batteries. Do not

connect incompatible products.

WATER-RESISTANCE Your phone is not

water-resistant. Keep it dry.

BACK-UP COPIES Remember to make

back-up copies or keep a written record of all

important information stored in your phone.

CONNECTING TO OTHER DEVICES When

connecting to any other device, read its user

guide for detailed safety instructions. Do not

connect incompatible products.

EMERGENCY CALLS Ensure the phone is

switched on and in service. The keypad is

active only in the Fold open mode. Press the

end key as many times as needed to clear the

display and return to the start screen. Enter

the emergency number, then press the call

key. Give your location. Do not end the call

until given permission to do so.

About your device

The wireless device described in this guide is approved for

use on the EGSM 900/1800/1900 and UMTS 2100

networks. Contact your service provider for more

information about networks.

When using the features in this device, obey all laws and

respect privacy and legitimate rights of others.

When taking and using images or video clips, obey all laws

and respect local customs as well as privacy and

legitimate rights of others.

Warning: To use any features in this device, other

than the alarm clock, the device must be switched on.

Do not switch the device on when wireless device use

may cause interference or danger.

Network Services

To use the phone you must have service from a wireless

service provider. Many of the features in this device

depend on features in the wireless network to function.

These network services may not be available on all

networks or you may have to make specific arrangements

with your service provider before you can utilize network

services. Your service provider may need to give you

additional instructions for their use and explain what

charges will apply. Some networks may have limitations

that affect how you can use network services. For instance,

some networks may not support all language-dependent

characters and services. Network features are designated

in this guide by .

Your service provider may have requested that certain

features be disabled or not activated in your device. If so,

they will not appear on your device menu. Your device may

also have been specially configured. This configuration

may include changes in menu names, menu order, and

icons. Contact your service provider for more information.

This device supports WAP 2.0 protocols (HTTP and SSL) that

run on TCP/IP protocols. Some features of this device, such

as MMS, browsing, e-mail and content downloading via

browser or over MMS, require network support for these

technologies.

For availability and information on using SIM card services,

contact your SIM card vendor. This may be the service

provider, network operator, or other vendor.

Enhancements, batteries, and

chargers

Always switch the device off, and disconnect the charger

before removing the battery.

Check the model number of any charger before use with

this device. This device is intended for use when supplied

with power from the DC-4, AC-3 and AC-4 charger, and

from the AC-1, ACP-7, ACP-8, ACP-9, ACP-12, LCH-8,

LCH-9, or LCH-12 charger when used with the charger

adapter CA-44 delivered with your phone.

The battery intended for use with this device is BL-5B.

Warning: Use only batteries, chargers, and

enhancements approved by Nokia for use with this

particular model. The use of any other types may

invalidate any approval or warranty and may be

dangerous.

For availability of approved enhancements, please check

with your dealer. When you disconnect the power cord of

any enhancement, grasp and pull the plug, not the cord.

Your Nokia N90

Model number: Nokia N90-1

Hereinafter referred to as Nokia N90.

Modes

Your device has four mechanical

modes that support different use

situations: Fold closed, Fold open

for using the device, Imaging for

recording video and taking

pictures, and Camera for taking

pictures. To switch between the

modes, turn the fold and the swing

axis camera. There is a short time-

out before a mode is activated.

Fold open mode

When you open the fold, the Fold

open mode is activated automatically: the main display

lights up, the keypad is available, and you can access the

menu. You can scroll in the menu with the scroll key or the

joystick.

The Fold open mode is activated even if the fold is not fully

opened. The fold opens close to 150 degrees, as shown in

the picture. Do not force the fold to open more.

Fold closed mode

When the fold is closed, the main display

is deactivated and the cover display lights

up. Ongoing calls are ended, unless the

loudspeaker is in use or a headset is

connected. If you are using the player to

listen to a sound clip, it continues to play.

In the Fold closed mode, the cover display

provides limited functions. On the

standby mode display, the signal strength

and battery indicators, operator logo,

time information, status indicators, and

the name of the currently active profile (if other than

General) may be shown. If you are listening to a sound

clip, volume bars and track information are displayed.

If the keypad is not locked, you can use the power key, the

joystick, and the capture key (for enhanced voice

commands). To select commands on the display, such as

Your Nokia N90

Show and Back, move the joystick to highlight the desired

text, and press the joystick.

Calendar and clock alarms and notes for missed calls and

new received messages are also displayed. You can view

received text messages and the text and image objects of

received multimedia messages on the cover display. To

view other types of messages, open the fold, and view the

message on the main display.

Incoming calls are indicated by their normal tone and a

note. To answer a call and use the handset, open the fold.

To answer a call and use the loudspeaker, select

Answer. If a headset is connected to the device, press the

answer key on the headset.

To make calls or use the menu, open the fold.

Imaging mode

In the Imaging mode, you can record videos, take pictures,

edit video clips and images, and send live video during a

video call . See ‘Camera and Gallery’, p. 42 and ‘Video

calls’, p. 29.

To activate the Imaging

mode, open the fold up to

90 degrees, hold the device

sideways, and turn the fold

up so that the main display

faces you. The camera

starts, and you can see the

view to be captured. You

can also turn the swing

axis camera. In the Imaging

mode, the camera unit

turns 180 degrees counterclockwise and close to 135

degrees clockwise. Do not force the camera unit to turn

more.

In the Imaging mode, the keypad is not active. You can use

the capture key, joystick, power key, the upper and lower

selection keys next to the main display, and to end an

active call.

Warning: You cannot make emergency calls in the

Imaging mode, because the keypad is not active. To make

an emergency call, activate the Fold open mode.

Your Nokia N90

Camera mode

In the Camera mode, you

can take pictures quickly.

You can use the camera

during an active call. See

‘Camera and Gallery’, p.

42.

To activate the Camera

mode, turn the swing axis

camera when the fold is

closed. The viewfinder appears on the cover display. The

camera unit turns 180 degrees counterclockwise and close

to 135 degrees clockwise. Do not force the camera unit to

turn more.

You can use the capture key, joystick, and power key in the

Camera mode.

Essential indicators

—The phone is being used in a GSM network.

(network service)—The phone is being used in a UMTS

network. See ‘Network’, p. 113.

—You have received one or several messages to the

Inbox folder in Messaging.

—There are messages waiting to be sent in the

Outbox folder. See ‘Outbox—messages waiting to be sent’,

p. 73.

—You have missed calls. See ‘Recent calls’, p. 35.

—Shown if Ringing type is set to Silent and Message

alert tone, IM alert tone, and E-mail alert tone are set

to Off. See ‘Profiles—Set tones’, p. 23.

—The phone keypad is locked. See ‘Keypad lock

(Keyguard)’ in the Quick start guide.

—You have an active clock alarm. See ‘Clock’, p. 16.

—The second phone line is being used. See ‘Call

settings’, p. 106.

—All calls to the phone are diverted to another

number. If you have two phone lines, the divert indicator

for the first line is and for the second .

—A headset is connected to the phone.

—A loopset is connected to the phone.

—The connection to a headset with Bluetooth has been

lost.

—A data call is active.

—A GPRS or EDGE packet data connection is available.

—A GPRS or EDGE packet data connection is active.

Your Nokia N90

—A GPRS or EDGE packet data connection is on hold.

These icons are shown instead of the signal strength

indicator (shown in the top left corner in the standby

mode). See ‘Packet data connections in GSM and UMTS

networks’, p. 107.

—A UMTS packet data connection is available.

—A UMTS packet data connection is active.

—A UMTS packet data connection is on hold.

—Bluetooth connectivity is On.

—Data is being transmitted using a Bluetooth

connection. See ‘Bluetooth connection’, p. 97.

—A USB connection is active.

—You have an e-mail that has been read, waiting for

you to retrieve to your phone.

—You have an e-mail that has not been read, waiting

for you to retrieve to your phone.

Attach the wrist strap

Thread the strap as shown in the

picture, and tighten it.

Configure settings

To use multimedia messaging, GPRS, Internet, and other

wireless services, you must have the proper configuration

settings on your phone.

You may have settings from your service providers already

installed in your phone, or you may receive the settings

from the service providers as a special text message. See

‘Data and settings’, p. 69. For more information on the

availability of the settings, contact your network operator,

service provider, nearest authorised Nokia dealer, or visit

the support area on the Nokia website, www.nokia.com/

support.

Nokia support on the Web

Check www.nokia.com/support or your local Nokia Web

site for the latest version of this guide, additional

information, downloads, and services related to your Nokia

product.

Help

Your device has context-sensitive help. You can access the

help from an application or from the main menu.

Your Nokia N90

When an application is open, to access help for the current

view, select Options > Help.

Example: To view instructions on how to create a

contact card, start to create a contact card, and select

Options > Help.

When you are reading the instructions, to switch between

help and the application that is open in the background,

press and hold .

To open help from the main menu, select Tools > Help.

Select the desired application to view a list of help topics.

To search for help topics using keywords, select Options >

Search by keyword.

When you are reading a help topic, to view other related

topics, press or .

Clock

Press , and select Clock.

To set a new alarm, select Options > Set alarm. Enter the

alarm time, and select OK. When the alarm is active, the

indicator is shown.

To turn off the alarm, select Stop. When the alarm tone

sounds, press any key, or select Snooze to stop the alarm

for five minutes, after which it resumes. You can do this a

maximum of five times.

If the alarm time is reached while the device is switched

off, the device switches itself on and starts sounding the

alarm tone. If you select Stop, the device asks whether you

want to activate the device for calls. Select No to switch

off the device or Yes to make and receive calls. Do not

select Yes when wireless phone use may cause

interference or danger.

To cancel an alarm, select Clock > > Options Remove

alarm.

Clock settings

To change the clock settings, select Options > Settings in

the clock. To change the time or date, select Time or Date.

To change the clock shown in the standby mode, scroll

down, and select Clock type > Analogue or Digital.

To allow the mobile phone network to update the time,

date, and time zone information to your phone , scroll

down, and select Auto time update. For the Auto time

update setting to take effect, the phone restarts.

To change the alarm tone, scroll down, and select Clock

alarm tone.

To change the daylight-saving time status, scroll down,

and select Daylight-saving. Select On to add one hour to

Your Nokia N90

the My current city time. See ‘World clock’, p. 17. When

the daylight-saving is active, the indicator is shown in

the clock main view. This setting is not shown if Auto

time update is on.

World clock

Open Clock, and press to open the world clock view.

In the world clock view, you can view the time in different

cities.

To add cities to the list, select Options > Add city. Enter

the first letters of the city name. The search field appears

automatically, and the matching cities are displayed.

Select a city. You can add a maximum of 15 cities to the

list.

To set your current city, scroll to a city, and select

Options > My current city. The city is displayed in the

clock main view, and the time in your phone is changed

according to the city selected. Check that the time is

correct and matches your time zone.

Volume and loudspeaker control

To increase or decrease the

volume level, when you have

an active call or are listening

to a sound, press or , respectively, or move the

joystick right or left.

The built-in loudspeaker allows you to speak and listen to

the phone from a short distance without having to hold the

phone to your ear, for example, having it on a table nearby.

Sound applications use the loudspeaker by default.

Warning: Do not hold the device near your ear when

the loudspeaker is in use, because the volume may be

extremely loud.

To locate the loudspeaker, see ‘Keys and parts’ in the Quick

start guide.

To use the loudspeaker during a call, start a call, and select

Options > Activate loudsp..

To turn off the loudspeaker when you have an active call

or are listening to a sound, select Options > Activate

handset.

File manager

Many features of the phone use memory to store data.

These features include contacts, messages, images, ringing

tones, calendar and to-do notes, documents, and

downloaded applications. The free memory available

depends on how much data is already saved in the phone

Your Nokia N90

memory. You can use a memory card as extra storage

space. Memory cards are rewritable, so you can delete and

save data on a memory card.

To browse files and folders in the phone memory or on a

memory card (if inserted), press , and select Tools > File

mgr.. The phone memory view ( ) opens. Press to

open the memory card view ( ).

To move or copy files to a folder, press and at the

same time to mark a file, and select Options > Move to

folder or Copy to folder.

Icons in File mgr.:

Folder

Folder that has a subfolder

To find a file, select Options > Find and the memory from

which to search, and enter a search text that matches the

file name.

Tip! You can use Nokia Phone Browser available in

Nokia PC Suite to view the different memories in your

phone. See the CD-ROM supplied in the sales package.

View memory consumption

To view what types of data you have in the phone and how

much memory the different data types consume, select

Options > Memory details. Scroll down to Free memory

to view the amount of free memory in the phone.

To view the amount of free memory on the memory card,

if you have a card inserted in the phone, press to open

the memory card view, and select > Options Memory

details.

Memory low—free memory

The phone notifies you if the phone memory or memory

card memory is getting low. If the phone memory starts to

get low when your browser is open, then the browser is

closed automatically to free some memory space.

To free phone memory, transfer data to a memory card in

the file manager. Mark files to be moved, select Move to

folder > Memory card, and a folder.

Tip! To free memory from the phone or from the

memory card, use Image Store available in Nokia PC

Suite to transfer images and video clips to a

compatible PC. See the CD-ROM supplied in the sales

package.

To remove data to free memory, use File mgr., or go to the

respective application. For example, you can remove the

following:

• Messages from Inbox, Drafts, and Sent folders in

Messaging

• Retrieved e-mail messages from the phone memory

• Saved Web pages

• Saved images, videos, or sound files

Your Nokia N90

• Contact information

• Calendar notes

• Downloaded applications. See also ‘Application

manager’, p. 115.

• Any other data that you no longer need

Memory card tool

Note: This device uses a Reduced Size Dual Voltage

(1.8/3V) MultiMediaCard (RS-MMC). To ensure

interoperability, use only dual voltage RS-MMCs. Check

the compatibility of an RS-MMC with its manufacturer or

provider.

Use only compatible Reduced-Size Multimedia cards (RS-

MMC) with this device. Other memory cards, such as

Secure Digital (SD) cards, do not fit in the memory card

slot and are not compatible with this device. Using an

incompatible memory card may damage the memory card

as well as the device, and data stored on the incompatible

card may be corrupted.

Keep all memory cards out of the reach of small children.

Press , and select Tools >

Memory. You can use a

memory card as extra storage

space. It is also good to

regularly back up the

information in the phone

memory to the memory card.

The information can be

restored to the phone later.

See ‘Inserting the memory

card’ in the Quick start guide.

You cannot use the memory card if the door of the memory

card slot is open.

Important: Do not remove the memory card in the

middle of an operation when the card is being accessed.

Removing the card in the middle of an operation may

damage the memory card as well as the device, and data

stored on the card may be corrupted.

To back up information from phone memory to a memory

card, select Options > Backup phone mem.

To restore information from the memory card to the phone

memory, select Options > Restore from card.

Tip! To rename a memory card, select Options >

Memory card name.

Your Nokia N90

Format a memory card

When a memory card is reformatted, all data on the card

is permanently lost.

Some memory cards are supplied preformatted and others

require formatting. Consult your retailer to find out if you

must format the memory card before you can use it.

To format a memory card, select Options > Format mem.

card. Select Yes to confirm. When formatting is complete,

enter a name for the memory card, and select OK.

Useful shortcuts

Use shortcuts to quickly get the most from your device.

Refer to the relevant sections in this user guide for further

details of the functions.

Shortcuts when taking pictures

• To zoom in and out, press the joystick up and down.

• To enter the Image setup settings, press the joystick.

• To change the flash mode, press the joystick left or

right.

• After you have taken a picture, to take a new picture,

press the capture key halfway down.

• If you have activated an application in the Imaging

mode, press the capture key to return to the camera.

Shortcuts when recording videos

• To zoom in or zoom out, press the joystick up or down.

• To enter the Video setup settings, press the joystick.

• If you have activated an application in the Imaging

mode, press the capture key to return to the camera.

Edit text and lists

• To mark an item in a list, scroll to it, and press and

at the same time.

• To mark multiple items in a list, press and hold ,

while you press or . To end the selection, release

, then release .

• To copy and paste text: Press and hold . At the

same time, press or to select letters and words,

or or to select rows of text. As the selection

moves, text is highlighted. To copy the text to

clipboard, while still holding , press Copy. To insert

the text into a document, press and hold and press

Paste.

Standby mode

• To switch between applications that are open, press

and hold . If memory is low, the phone may close

some applications. The phone saves any unsaved data

before closing an application.

• To change the profile, press , and select a profile.

• Press and hold to switch between General and

Silent profiles. If you have two phone lines then this

action will switch between the two lines.

Your Nokia N90

• To open the last dialled numbers list, press .

• To use voice commands, press and hold the capture

key. See ‘Voice commands’, p. 114.

• To start a connection to Web, press and hold . See

‘Web’, p. 81.

For further shortcuts available in the standby mode, see

‘Active standby mode’, p. 25.

Keypad lock (keyguard)

• To lock: In the standby mode, press , then .

• To unlock: Press , then .

• To lock the keypad in the Fold closed mode, press

and select Lock keypad.

• To turn on the display light when the keypad lock is on,

press .

When the keypad lock is on, calls may be possible to the

official emergency number programmed into your device.

Enter the emergency number, and press .

Personalise your device

Your service provider may have requested that certain

features be disabled or not activated in your device. If so,

they will not appear on your device menu. Your device may

also have been specially configured for your network

provider. This configuration may include changes in menu

names, menu order, and icons. Contact your service

provider for more information.

• To use the standby main display for fast access to your

most frequently used applications, see ‘Active standby

mode’, p. 25.

• To change the standby

mode background image

or what is shown in the

screen saver, see ‘Change

the look of your device’,

p. 24, and ‘Cover display

settings’, p. 114.

• To customise the ringing

tones, see ‘Profiles—Set

tones’, p. 23.

• To change the shortcuts

assigned for the different

presses of the scroll key and left and right selection

keys in the standby mode, see ‘Standby mode’, p. 105.

The scroll key shortcuts are not available if the active

standby is on.

• To change the clock shown in the standby mode, press

, and select Clock > Options > Settings > Clock

type > Analogue or Digital.

• To change the clock alarm tone, press , and select

Clock > Options > Settings > Clock Alarm tone and

a tone.

• To change the calendar alarm tone, press , and

select Calendar > Options > Settings > Calendar

alarm tone and a tone.

• To change the welcome note to a text or an image,

press , and select Tools > Settings > Phone >

General > Welcome note or logo.

• To assign an individual ringing tone to a contact, press

, and select Contacts. See ‘Add ringing tones for

contacts’, p. 40.

• To assign a speed dial to a contact, press a numbered

key in the standby mode ( is reserved for the voice

mailbox), and press . Select Yes, then select a

contact.

• To rearrange the main menu, in the main menu, select

Options > Move, Move to folder, or New folder. You

can move less used applications into folders, and place

Personalise your device

applications that you use more often into the main

menu.

Profiles—Set tones

To set and customise the ringing tones, message alert

tones, and other tones for different events, environments,

or caller groups, press , and select Tools > Profiles. If

the currently selected profile is other than General, the

profile name is shown at the top of the display in the

standby mode.

To change the profile, press in the standby mode.

Scroll to the profile you want to activate, and select OK.

To modify a profile, press , and select Tools > Profiles.

Scroll to the profile, and select Options > Personalise.

Scroll to the setting you want to change, and press to

open the choices. Tones stored on the memory card are

indicated with . You can scroll through the tone list

and listen to each one before you make your selection.

Press any key to stop the sound.

Tip! When you choose a tone, Tone downloads opens

a list of bookmarks. You can select a bookmark and

start connection to a Web page to download tones.

Tip! For information on how to change the alert tone

for the calendar or clock, see ‘Personalise your device’,

p. 22.

To create a new profile, select Options > Create new.

Offline profile

The Offline profile lets you use the phone without

connecting to the wireless network. When you activate the

Offline profile, the connection to the wireless network is

turned off, as indicated by in the signal strength

indicator. All wireless phone signals to and from the device

are prevented. If you try to send messages, they are placed

in the outbox to be sent later.

Warning: In the offline profile you cannot make or

receive any calls, except make calls to certain

emergency numbers, or use other features that require

network coverage. To make calls, you must first activate

the phone function by changing profiles. If the device

has been locked, enter the lock code.

Warning: Your device must be switched on to use

Offline profile. Do not switch the device on when

wireless device use is prohibited or when it may cause

interference or danger.

To leave the Offline profile, press , and select Tools >

Profiles, select another profile, and select Options >

Activate > Yes. The phone re-enables wireless

Personalise your device

transmissions (providing there is sufficient signal

strength). If a Bluetooth connection is activated before

entering the Offline profile, it will be deactivated. A

Bluetooth connection is automatically reactivated after

leaving the Offline profile. See ‘Bluetooth connection

settings’, p. 98.

Transfer content from

another device

You can copy contacts, calendar, images, video, and sound

clips using a Bluetooth connection, from a compatible

Nokia Series 60 device.

You can use your Nokia N90 device without a SIM card.

The offline profile is automatically activated when the

device is switched on without a SIM card. This allows you

to use the SIM card in another device.

To avoid duplicate entries, you can transfer the same type

of information, for example, contacts, from the other

device to your Nokia N90 only once.

Before starting the transfer, you must activate Bluetooth

connectivity on both devices. On each device, press ,

and select Connect. > > Bluetooth. Select Bluetooth On.

Give a name to each device.

To transfer content:

1Press , and select Tools > Transfer on your Nokia

N90. Follow the instructions on the screen.

2The device searches for devices with Bluetooth

connectivity. When it has finished the search, select

your other phone from the list.

3You are asked to enter a code on your Nokia N90. Enter

a code (1-16 digits), and select OK. Enter the same

code on the other phone, and select OK.

4The Transfer application is sent to the other phone as

a message.

5Open the message to install Transfer on the other

phone, and follow the instructions on the screen.

6From your Nokia N90, select the content you want to

copy from the other phone.

Content is copied from the memory and memory card of

the other phone to your Nokia N90 and memory card.

Copying time depends on the amount of data to be

transferred. You can cancel copying and continue later.

The Transfer application is added to the main menu of the

other phone.

Change the look of your

device

To change the look of your phone displays, such as the

wallpaper and icons, press , and select Tools > Themes.

The active theme is indicated by . In Themes you can

Personalise your device

group together elements from other themes or select

images from the Gallery to personalise themes further.

The themes on the memory card are indicated by . The

themes on the memory card are not available if the

memory card is not inserted in the phone. If you want to

use the themes saved in the memory card without the

memory card, save the themes in the phone memory first.

See also ‘Cover display settings’, p. 114.

To open a browser connection and download more

themes, select Theme downloads.

To activate a theme, scroll to it, and select Options >

Apply.

To preview a theme, scroll to it, and select Options >

Preview.

To edit themes, scroll to a theme, and select Options >

Edit to change the following options:

•Wallpaper—The image to be shown as a background

image in the standby mode.

•Power saver—The power saver type on the main

display: date and time, or a text you have written

yourself. See also Power saver time-out, p. 106.

• Image in 'Go to'—The background image for the Go to

application.

To restore the selected theme back to its original settings,

select Options > Restore orig. theme when you edit a

theme.

Active standby mode

Use your standby main display for fast access to your most

frequently used applications. By default, the active

standby mode is on.

Press , select Tools > Settings > > Phone Standby

mode > Active standby, and press to switch the active

standby on or off.

The active standby display is

shown with default

applications across the top of

the screen, and calendar,

to-do, and player events

listed below.

Scroll to an application or

event, and press .

The standard scroll key

shortcuts available in the

standby mode cannot be used

when the active standby mode is on.

Personalise your device

To change the default applications shortcuts:

1Press , select Tools > Settings > > Phone Standby

mode > Active standby apps., and press .

2Highlight a shortcut to an application, and select

Options > Change.

3Select a new application from the list, and press .

Some shortcuts may be fixed, and you are not able to

change them.

Make calls

Voice calls

Tip! To increase or decrease the volume during a call,

press or . If you have set the volume to Mute,

you cannot adjust the volume with the scroll key. To

adjust the volume, select Unmute, and then press

or .

1In the standby mode, enter the phone number,

including the area code. Press to remove a number.

For international calls, press twice for the +

character (replaces the international access code), and

enter the country code, area code (omit the leading

zero if necessary), and phone number.

2Press to call the number.

3Press to end the call (or to cancel the call attempt).

Pressing always ends a call, even if another

application is active.

Activating the Fold closed mode during an active call ends

the call unless you have activated the loudspeaker or a

headset.

To make a call from Contacts, press , and select

Contacts. Scroll to the desired name, or enter the first

letters of the name to the search field. Matching contacts

are listed. To call, press or select Options > > Call

Voice call. If there is more than one number listed for the

contact, scroll to the number you want to call and select

Call.

You must copy the contacts from your SIM to Contacts

before you can make a call this way. See ‘Copy contacts’,

p. 39.

To call your voice mailbox ( ), press and hold in the

standby mode. See also ‘Call diverting’, p. 113.

Tip! To change the phone number of your voice

mailbox, press , and select Tools > Voice mail >

Options > Change number. Enter the number

(obtained from your service provider), and select OK.

To call a recently dialled number in the standby mode,

press to access a list of the 20 last numbers you called

or attempted to call. Scroll to the number you want, and

press to call the number.

Make a conference call

1Make a call to the first participant.

2To make a call to another participant, select Options >

New call. The first call is automatically put on hold.

Make calls

3When the new call is answered, to join the first

participant in the conference call, select Options >

Conference.

To add a new person to the call, repeat step 2, and

select Options > Conference > Add to conference.

Your device supports conference calls between a

maximum of six participants, including yourself.

To have a private conversation with one of the

participants, select Options > Conference > Private.

Select a participant, and select . The Private

conference call is put on hold on your device. The other

participants can still continue the conference call.

Once you have finished the private conversation,

select Options > Add to conference to return to the

conference call.

To drop a participant, select Options > Conference>

Drop participant, scroll to the participant, and select

Drop.

4To end the active conference call, press .

Speed dial a phone number

To activate speed dialling, press , and select Tools>

Settings > Call > Speed dialling > On.

To assign a phone number to one of the speed dialling

keys ( — ), press , and select Tools > Speed dial.

Scroll to the key to which you want to assign the phone

number, and select Options > Assign. is reserved for

the voice mailbox.

To call in the standby mode, press the speed dial key and

Voice dialling

Your device supports enhanced voice commands.

Enhanced voice commands are not dependent on the

speaker’s voice, so the user does not record voice tags in

advance. Instead, the device creates a voice tag for the

entries in contacts, and compares the spoken voice tag to

it. The voice recognition in the device adapts to the main

user’s voice to recognise the voice commands better.

The voice tag for a contact is the name or nickname that is

saved on the contact card. To listen to the synthesised

voice tag, open a contact card, and select Options > Play

voice tag.

Make a call with a voice tag

Note: Using voice tags may be difficult in a noisy

environment or during an emergency, so you should not

rely solely upon voice dialing in all circumstances.

When you use voice dialling, the loudspeaker is in use. Hold

the device at a short distance away when you say the voice

tag.

Make calls

1To start voice dialling, press and hold the capture key.

If you are using a compatible headset with the headset

key, press and hold the headset key to start voice

dialling.

2A short tone is played, and Speak now is displayed. Say

clearly the name or nickname that is saved on the

contact card.

3The device plays a synthesised voice tag for the

recognised contact in the selected device language,

and displays the name and number. After a timeout of

1.5 seconds, the device dials the number.

If the recognised contact was not correct, select Next

to view a list of other matches, or Quit to cancel voice

dialling.

If several numbers are saved under the name, the device

selects the default number, if it has been set. Otherwise

the device selects the first available number of the

following: Mobile, , Mobile (home) Mobile (business),

Telephone, Tel. (home), and Tel. (business).

Video calls

When you make a video call, you can see a real-time,

two-way video between you and the recipient of the call.

The live video image, or the selected still image captured

by the camera in your device is shown to the video call

recipient.

To be able to make a video call, you must have a USIM card

and be in the coverage of a UMTS network. For availability

of and subscription to video call services, contact your

network operator or service provider. A video call can only

be made between two parties. The video call can be made

to a compatible mobile phone or an ISDN client. Video

calls cannot be made while there is another voice, video,

or data call active.

Warning! You cannot make emergency calls in the

Imaging mode because the keypad is not active. To make

an emergency call, activate the Fold open mode.

Icons:

You are not receiving video (the recipient is not

sending video or the network is not transmitting it).

You have denied video sending from your device. To

send a still image instead, see ‘Call settings’, p. 106.

1To start a video call, in the

Fold open mode, enter the

phone number in the

standby mode, or select

Contacts, and select a

contact.

2Select Options > Call >

Video call.

3Activate the Imaging mode

after the call recipient has

answered the call.

Make calls

Starting a video call may take a while. Waiting for image

is shown. If the call is not successful (for example, video

calls are not supported by the network, or the receiving

device is not compatible) you are asked if you want to try

a normal call or send a message instead.

The video call is active when you see two video images,

and hear the sound through the loudspeaker. The call

recipient may deny video sending ( ), in which case you

hear the sound and may see a still image or a grey

background graphic.

Tip! To increase or decrease the volume during a call,

in the Fold open mode, press or , or in the

Imaging mode, move the joystick left or right.

To change between showing video or hearing only sound,

select Enable/Disable > Sending video (Imaging mode

only), Sending audio or Sending audio & video (Imaging

mode only).

To send live video image of yourself, turn the camera unit

so that the lens is facing you.

To zoom your own image, move the joystick up and down

to zoom in and zoom out. The zoom indicator is shown on

the top of the display.

To switch the places of the sent video images on the

display, select Change image order.

If you activate the Fold open mode during a video call,

sending your own video image stops because the camera is

not active. You can, however, still see the video of the

recipient.

Note: Even if you have denied video sending during

a video call, the call will still be charged as a video call.

Check the pricing with your network operator or service

provider.

To end the video call, press .

Video sharing

Use Video sharing to send live video or a video clip from

your mobile device to another compatible mobile device

during a voice call. Simply invite a recipient to view the live

video, or a video clip you want to share. Sharing begins

automatically when the recipient accepts the invitation,

and you activate the correct mode. See ‘Share video’, p. 31.

Video sharing requirements

Because Video sharing requires a 3G Universal Mobile

Telecommunications System (UMTS) connection, your

ability to use Video sharing depends on 3G network

availability. Contact your service provider for questions

about network availability and fees associated with using

this application. To use Video sharing you must:

Make calls

• Ensure that Video sharing is installed on your Nokia

N90.

• Ensure that your device is set up for person-to-person

connections. See ‘Settings’, p.31.

• Ensure you have an active UMTS connection and are

within UMTS network coverage. See ‘Settings’, p. 31. If

you start the sharing session while you are within

UMTS network coverage and a handover to GSM

occurs, the sharing session is discontinued, but your

voice call continues.

• Ensure that both the sender and recipient are

registered to the UTMS network. If you invite someone

to a sharing session and that person has his phone

turned off, is not within UMTS network coverage, or

does not have video sharing installed or person-to-

person connections set up, they do not know that you

are sending an invitation. However, you receive an error

message that the recipient cannot accept the

invitation.

Settings

Person-to-person connection settings

A person-to-person connection is also known as a Session

Initiation Protocol (SIP) connection. The SIP profile settings

must be configured in your device before you can use

Video sharing. Setting up a SIP profile allows you to

establish a live person-to-person connection to another

compatible phone. The SIP profile must also be established

to receive a sharing session.

Ask your network operator or service provider for the SIP

profile settings, and save them in your device. Your

network operator or service provider may send you the

settings over the air.

If you know a recipient’s SIP address, you can enter it on

your contact card for that person. Open Contacts from

your device main menu, and open the contact card (or

start a new card for that person). Select Options > Add

detail > Web address. Enter the SIP address in a format

sip:username@domainname (you can use an IP address

instead of a domain name).

UTMS connection settings

To set up your UMTS connection, do the following:

• Contact your service provider to establish an

agreement for you to use the UMTS network.

• Ensure that your device UMTS access point connection

settings are configured properly. For help, see

‘Connection settings’, p. 107.

Share video

To receive a sharing session, the recipient must install

Video sharing and configure the required settings on their

Make calls

mobile device. You and the recipient must both be

registered to the service before you can start sharing.

To receive share invitations, you must be registered to the

service, have an active UMTS connection, and be within

the UMTS network coverage.

Live video

1When a voice call is active, select Options > Share

video > Live.

2The phone sends the invitation to the SIP address you

have added to the contact card of the recipient.

If the recipient has several SIP addresses in the contact

card, select the SIP address to which you want to send

the invitation, and Select to send the invitation.

If the SIP address of the recipient is not available,

enter a SIP address. Select OK to send the invitation.

3Sharing begins automatically when the recipient

accepts the invitation, and you activate the Imaging

mode. See ‘Imaging mode’, p. 13.

When you activate the Imaging mode, the loudspeaker

is active. You can also use a headset to continue your

voice call while you share live video.

4Select Pause to pause the sharing session. Select

Continue to resume sharing.

5To end the sharing session, in the Imaging mode,

return to the Fold open mode. To end the voice call,

press the End key.

Video clip

1When a voice call is active, select Options > Share

video Clip > .

A list of video clips opens.

2Select a video clip you want to share. A preview view

opens. To preview the clip, select Options > Play.

3Select Options > Invite.

You may need to convert the video clip into a suitable

format to be able to share it. Clip must be converted

for sharing. Continue? appears. Select OK.

The phone sends the invitation to the SIP address you

have added to the contact card of the recipient.

In case the recipient has several SIP addresses in the

contact card, select the SIP address to which you want

to send the invitation, and Select to send the

invitation.

If the SIP address of the recipient is not available, enter

a SIP address. Select OK to send the invitation.

4Sharing begins automatically in the Fold open mode

when the recipient accepts the invitation. See ‘Fold

open mode’, p.12.

5Select Pause to pause the sharing session. Select

Options > Continue to resume sharing.

6To end the sharing session, select Stop. To end the voice

call, press the End key.

Make calls

Accept an invitation

When someone sends you a share invitation, an invitation

message is displayed showing the sender’s name or SIP

address. If your device is not set to Silent, it rings when

you receive an invitation.

If someone sends you a share invitation and you are not

within UMTS network coverage, you will not know that

you received an invitation.

When you receive an invitation, you can select:

•Accept to begin the sharing session. If the sender

wants to share live video, activate the Imaging mode.

•Reject to decline the invitation. The sender receives a

message that you rejected the invitation. You can also

press the End key to decline the sharing session and

disconnect the voice call.

To disconnect the session, when sharing a live video, return

to the Fold open mode. If you share a video clip, select Exit.

Sharing ended is displayed.

Answer or reject a call

To answer the call in the Fold open mode, press . If

Anykey answer is set to On, to answer a call in the Fold

closed mode, open the fold, and the call starts

automatically. Otherwise, open the fold, and press . To

answer a call, and use the loudspeaker in the Fold closed

mode, select Answer ( ).

To mute the ringing tone when a call comes in, select

Silence.

Tip! If a compatible headset is connected to the

device, to answer and end a call, press the headset key.

If you do not want to answer a call, in the Fold open mode,

press to reject it. In the Fold closed mode, select

Reject. The caller hears a line busy tone. If you have

activated the Call divert settings > If busy function to

divert calls, rejecting an incoming call also diverts the call.

See ‘Call diverting’, p. 113.

When you reject an incoming call in the Fold open mode,

you can also send a text message to the caller informing

why you cannot answer the call. Select Options > Send

text message. You can edit the text before sending it. To

set up this option and write a standard text message, see

‘Call settings’, p. 106.

If you answer a voice call during a video call, the video call

is dropped. is not available during a video Call waiting

call.

Answer or reject a video call

When a video call arrives, is displayed.

Make calls

Tip! You can assign a ringing tone for video calls.

Press and select Tools > Profiles, select a profile

and Options > Personalise > Video call tone.

In the Fold open mode, press to answer the video call.

To start sending video, activate the Imaging mode, and a

live video image, recorded video clip, or the image being

captured by the camera in your device is shown to the

caller. If you want to send a live video image, turn the

camera unit to the direction from which you want to send

the video image. If you do not activate the Imaging mode,

video sending is not possible, but you can still hear the

other person. A grey screen is shown in place of the video.

To replace the grey screen with a still image, see ‘Call

settings’, Image in video call, p. 106.

Tip! To send video of yourself, in the Imaging mode

turn the camera unit so that the lens is facing you.

If you activate the Fold open mode during a video call,

sending your own video image stops because the camera

is not active. You can, however, still see the video of the

recipient.

Note: Even if you have denied video sending during

a video call, the call will still be charged as a video call.

Check the pricing with your network operator or

service provider.

To end the video call, in the Imaging mode or in the Fold

open mode, press .

Call waiting

You can answer a call while you have another call in

progress if you have activated Call waiting in Tools >

Settings > Call > Call waiting.

To answer the waiting call, press . The first call is put

on hold.

To switch between the two calls, select Swap. Select

Options Transfer > to connect an incoming call or a call

on hold with an active call and to disconnect yourself from

the calls. To end the active call, press . To end both

calls, select Options > End all calls.

Options during a voice call

Many of the options that you can use during a voice call

are network services. Select Options during a call for some

of the following options: Mute or Unmute, , Answer

Reject, Swap, Hold or Unhold, Activate handset, Activate

loudsp., or Activate handsfree (if a compatible headset

with Bluetooth connectivity is attached), End active call

or End all calls, New call, . Conference, and Transfer

Select from the following:

Replace—To end an active call and replace it by answering

the waiting call.

Send MMS (in UMTS networks only)—To send an image or

a video in a multimedia message to the other participant

Make calls

of the call. You can edit the message and change the

recipient before sending. Press to send the file to a

compatible device ( ).

Send DTMF—To send DTMF tone strings, for example, a

password. Enter the DTMF string or search for it in

Contacts. To enter a wait character (w) or a pause

character ( ), press repeatedly. Select pOK to send the

tone.

Tip! You can add DTMF tones to the Phone number

or DTMF fields in a contact card.

Options during a video call

Select Options during a video call for the following

options: Enable or Disable (audio in the Fold open mode;

video, audio, or both in the Imaging mode), Activate

handset (if a headset with Bluetooth connectivity is

attached), Activate loudsp., or Activate handsfree (Fold

open mode only, and if a headset with Bluetooth

connectivity is attached), End active call, Change image

order, Zoom in/Zoom out (Imaging mode only), and Help.

Log

Recent calls

To monitor the phone numbers of missed, received, and

dialled calls, press , and select My own > > Log Recent

calls. The device registers missed and received calls only if

the network supports these functions, the device is

switched on, and within the network service area.

Tip! When you see a note in the standby mode about

missed calls, select Show to access the list of missed

calls. To call back, scroll to a name or number, and

press .

To clear all recent call lists, select Options > Clear recent

calls in the recent calls main view. To clear one of the call

registers, open the register you want to erase, and select

Options > Clear list. To clear an individual event, open a

Call duration

To monitor the approximate duration of your incoming

and outgoing calls, press , and select My own > Log >

Call duration.

Make calls

To set the call duration to show on the display each time

a call is active, select My own > Log > Options > Settings

> Show call duration. Select Yes or No.

Note: The actual time invoiced for calls by your

service provider may vary, depending on network

features, rounding off for billing, and so forth.

To clear call duration timers, select Options > Clear

timers. For this you need the lock code, see ‘Security’,

‘Phone and SIM’, p. 110.

Packet data

To check the amount of data sent and received during

packet data connections, press , and select My own >

Log > Packet data. For example, you may be charged for

your packet data connections by the amount of data sent

and received.

Monitor all communication events

Icons in Log:

Incoming

Outgoing

Missed communication events

To monitor all voice and video

calls, text messages, or data

connections registered by the

device, press , select My own

> Log, and press to open

the general log. For each

communication event, you can

see the sender or recipient

name, phone number, name of

the service provider, or access

point. You can filter the general

log to view just one type of event and create new contact

cards based on the log information.

Tip! If you want to see the duration of a voice call on

the main display during an active call, select Options >

Settings > Show call duration > Yes.

Tip! To view a list of sent messages, press , and

select Messaging > Sent.

Subevents, such as a text message sent in more than one

part and packet data connections, are logged as one

communication event. Connections to your mailbox,

multimedia messaging centre, or Web pages are shown as

packet data connections.

To filter the log, select Options > Filter and a filter.

Make calls

To erase the contents of the log, recent calls register, and

messaging delivery reports permanently, select Options>

Clear log. Select Yes to confirm.

To set the Log duration, select Options > Settings > Log

duration. The log events remain in the phone memory for

a set number of days after which they are automatically

erased to free memory. If you select No log, all the log

contents, recent calls register, and messaging delivery

reports are permanently deleted.

To view the details of a communication event, in the

general log view scroll to an event, and press the scroll key.

Tip! In the details view you can copy a phone number

to the clipboard, and paste it to a text message, for

example. Select Options > Copy Number.

Packet data counter and connection timer: To view how

much data, measured in kilobytes, is transferred and how

long a certain packet data connection lasts, scroll to an

incoming or outgoing event indicated by Pack., and select

Options > View details.

Contacts (Phonebook)

Press , and select Contacts. In Contacts you can add a

personal ringing tone or a thumbnail image to a contact

card. You can also create contact groups, which allow you

to send text messages or e-mail to many recipients at the

same time. You can add received contact information

(business cards) to contacts. See ‘Data and settings’, p. 69.

Contact information can only be sent to or received from

compatible devices.

Tip! Regularly back up the phone information to the

memory card. You can restore the information, such as

contacts, to the phone later. See ‘Memory card tool’, p.

19. You can also use Nokia PC Suite to back up your

contacts to a compatible PC. See the CD-ROM supplied

in the sales package.

Options in Contacts are Open, Call, Create

message, New contact, Open conversation, Edit,

Delete, Duplicate, Add to group, Belongs to groups,

Mark/Unmark, Copy/Copy to SIM direct., SIM

contacts, Go to web address, Send, Memory details,

Settings, Help, and Exit.

Save names and numbers

1Select Options > New contact.

2Fill in the fields that you want, and select Done.

Tip! If you use video sharing with a contact,

save the contact’s session initiation protocol (SIP)

address to the Web address field of the contact

card. Enter the SIP address in the format

sip:username@domainname (you can use an IP

address instead of a domain name).

To edit contact cards in Contacts, scroll to the contact

card you want to edit, and select Options Edit > .

To delete a contact card in Contacts, select a card, and

press . To delete several contact cards at the same time,

press and to mark the contacts, and press to

delete.

Tip! To add and edit contact cards, use Nokia

Contacts Editor available in Nokia PC Suite. See the

CD-ROM supplied in the sales package.

To attach a small thumbnail image to a contact card, open

the contact card, and select Options > Edit > Options >

Add thumbnail. The thumbnail image is shown when the

contact calls.

Tip! Speed dialling is a quick way to call frequently

used numbers. You can assign speed dialling keys to

Contacts (Phonebook)

eight phone numbers. See ‘Speed dial a phone number’,

p. 28.

Tip! To send contact information, select the card you

want to send. Select Options > Send > Via text

message, Via multimedia, or Via Bluetooth. See

‘Messaging’, p. 63 and ‘Send data using a Bluetooth

connection’, p. 98.

Default numbers and addresses

You can assign default numbers or addresses to a contact

card. In this way if a contact has several numbers or

addresses, you can easily call or send a message to the

contact to a certain number or address. The default

number is also used in voice dialling.

1In contacts, select a contact, and press .

2Select Options > Defaults.

3Select a default to which you want to add a number or

an address, and select Assign.

4Select a number or an address you want to set as a

default.

The default number or address is underlined in the contact

card.

Copy contacts

If you have phone numbers stored on the SIM card, copy

them to Contacts. Entries that are saved only on the SIM

card are not shown in the contacts directory, and for

incoming calls and messages, the device cannot match the

number to the name.

When a new SIM card is inserted in the device and you

open Contacts for the first time, you are asked if you want

to copy the contact entries on the SIM card to the device

memory. Select Yes to copy the entries to your contacts

directory.

To copy individual names and numbers from a SIM card to

your device, press , and select Contacts > > Options

SIM contacts > SIM directory. Select the names you want

to copy and Options > Copy to Contacts.

To copy contacts to your SIM card, press , and select

Contacts. Select the names you want to copy and

Options > Copy to SIM direct., or Options > Copy > To

SIM directory. Only the contact card fields supported by

your SIM card are copied.

Tip! You can synchronise your contacts to a

compatible PC with Nokia PC Suite. See the CD-ROM

supplied in the sales package.

Contacts (Phonebook)

SIM directory and other SIM services

For availability and information on using SIM card services,

contact your SIM card vendor. This may be the service

provider, network operator, or other vendor.

Press , and select Contacts > Options > SIM

contacts > SIM directory to see the names and numbers

stored on the SIM card. In the SIM directory you can add,

edit, or copy numbers to contacts, and you can make calls.

To view the list of fixed dialling numbers, select Options >

SIM contacts > Fixed dialling contacts. This setting is

only shown if supported by your SIM card.

To restrict calls from your phone to selected phone

numbers, select > Options Activ. fixed dialling. To add

new numbers to the fixed dialling list, select Options >

New SIM contact. You need the PIN2 code for these

functions.

When you use Fixed dialling, packet data connections are

not possible, except when sending text messages over a

packet data connection. In this case, the message centre

number and the recipient’s phone number must be

included on the fixed dialling list.

When fixed dialing is activated, calls may be possible to

the official emergency number programmed into your

device.

Add ringing tones for contacts

When a contact or group member calls you, the phone

plays the chosen ringing tone (if the caller’s telephone

number is sent with the call and your phone recognises it).

1Press to open a contact card, or go to the groups

list, and select a contact group.

2Select Options > Ringing tone. A list of ringing tones

opens.

3Select the ringing tone you wish to use for the

individual contact or the selected group.

To remove the ringing tone, select Default tone from the

list of ringing tones.

Create contact groups

Options in the groups list view are Open, New group,

Delete, Rename, Ringing tone, Memory details,

Settings, Help, and Exit.

1In Contacts, press to open the groups list.

2Select Options > New group.

3Write a name for the group or use the default name

Group %N, and select OK.

4Open the group, and select Options > Add members.

5Scroll to a contact, and press to mark it. To add

multiple members at a time, repeat this action on all

the contacts you want to add.

Contacts (Phonebook)

6Select OK to add the contacts to the group.

To rename a group, select Options > Rename, enter the

new name, and select OK.

Remove members from a group

1In the groups list, open the group you want to modify.

2Scroll to the contact, and select Options > Remove

from group.

3Select Yes to remove the contact from the group.

Tip! To check to which groups a contact belongs,

scroll to the contact, and select Options > Belongs to

groups.

Camera and Gallery

Camera

The Nokia N90 device supports an image capture

resolution of 1600 x 1200 pixels. The image resolution in

these materials may appear different.

To activate the camera,

activate the Imaging mode.

See ‘Imaging mode’, p.13.

The camera starts, and you

can see the view to be

captured.

Warning! You

cannot make emergency

calls in the Imaging mode

because the keypad is not

active. To make an

emergency call, activate the Fold open mode.

If the camera is in Video mode, open the image mode by

selecting Options > Image mode.

The images are automatically saved in the gallery in .jpeg

format. You can send images in a multimedia message, as

an e-mail attachment or using a Bluetooth connection.

Take pictures in the Imaging mode

To make lighting and colour adjustments before taking a

picture, press the joystick, and select Flash, White

balance, Exposure value, or Colour tone. See ‘Setup

settings—Adjust colour and lighting’, p. 45.

To select a scene, press the joystick, and select Scene. See

‘Scenes’, p. 45.

Your device also has a swing axis camera, which makes

capturing views in different situations easier. You can turn

the camera unit clockwise and counterclockwise. See

‘Camera mode’, p. 14.

Options before taking a picture are Video mode, Go

to Gallery, Image setup, Sequence mode/Normal

mode, Activate self-timer, Settings, and Help.

To lock the focus on an object, press the capture key

halfway down. The green locked focus indicator appears

on the display. If the focus was not locked, the red locked

focus indicator appears. Release the capture key, and press

it again halfway down. You can, however, take the picture

without locking the focus.

To take a picture, press the capture key. Do not move the

device before the image is saved. The image is saved

Camera and Gallery

automatically in the Images & video folder of Gallery. See

‘Gallery’, p. 55.

Tip! You can also take pictures conveniently in the

Camera mode. See ‘Take pictures in the Camera mode’,

p. 47.

Imaging mode camera indicators show the following:

• The phone memory ( ) and memory card ( )

indicators (1) show where images are saved.

• The images indicator (2) estimates how many images,

depending on the selected image quality, can fit in the

remaining memory of your device or the memory card.

• The scene indicator (3) shows the active scene. See

‘Scenes’,p. 45.

• The flash indicator

(4) shows if the flash

is set to Automatic

( ), Red eye redu.

( ), Forced ( ),

or Off ( ).

• The green focus

indicator (5) is

displayed when the

focus point is locked

by the viewfinder (not visible in sequence mode).

• The self-timer indicator (6) shows that the

self-timer is activated. See ‘You in the picture—self-

timer’, p. 44.

• The sequence mode indicator (7) shows that the

sequence mode is active. See ‘Take pictures in a

sequence’, p. 44.

• The resolution indicator (8) shows the selected image

quality. See ‘Adjust still image camera settings’, p. 46

Shortcuts are as follows:

• Press the joystick up and down to zoom in and zoom

out. The zoom indicator, which appears on the side

pane, shows the zoom level.

• Press the joystick to enter the Image setup settings.

See ‘Setup settings—Adjust colour and lighting’, p. 45.

• Press the joystick left or right to change the flash mode.

Saving the captured image may take longer if you change

the zoom, lighting, or colour settings.

When taking a picture, note the following:

• It is recommended to use both hands to keep the

camera still.

• To take images or record video in different

environments, use the proper scene for each

environment. See ‘Scenes’, p. 45.

• To make lighting and colour adjustments before taking

a picture, press the joystick, or select Options > Image

setup > Scene, Flash, White balance, Exposure value,

or Colour tone. See ‘Setup settings—Adjust colour and

lighting’, p. 45.

Camera and Gallery

• The quality of a zoomed picture is lower than that of a

nonzoomed picture.

• The camera goes into battery saving mode if there are

no key presses in a while. To continue taking pictures,

press the capture key.

After the image is taken, note the following:

• If you do not want to keep the image, select Options >

Delete.

• To return to the viewfinder to take a new picture, press

the capture key halfway down.

• To send the image Via multimedia, Via e-mail, or Via

Bluetooth, select Options > Send. For more

information, see ‘Messaging’, p. 63 and ‘Bluetooth

connection’, p. 97. This option is not available during an

active call.

• To send an image to the other party during an active

call, select Options > Send to caller.

• To edit the picture, select Options > Edit. See ‘Edit

images’, p. 48.

• To print the picture, select Options > Print. See ‘Image

print’, p. 57.

Take pictures in a sequence

Select Options > Sequence mode to set the camera to

take six pictures in a sequence. You can also use the

sequence mode with the self-timer. See ‘You in the

picture—self-timer’, p. 44. The pictures are automatically

saved in Gallery.

To take the pictures, press and hold the capture key. If you

want to take less than six pictures, release the capture key

after the desired amount of pictures.

After taking the pictures, they are shown in a grid on the

main display. To view a picture, press the joystick to open

it.

To return to the sequence mode viewfinder, press the

capture key halfway down.

You in the picture—self-timer

Use the self-timer to delay the taking of a picture so that

you can include yourself in the picture. To set the

self-timer delay, select Options > > Activate self-timer

2 seconds or 10 seconds. To activate the self-timer, select

Activate. The self-timer indicator ( ) blinks and the

device beeps when the timer is running. The camera takes

the picture after the selected delay has elapsed. You can

also use the self-timer in the sequence mode. See ‘Take

pictures in a sequence’, p. 44.

Tip! Select Options > Activate self-timer > 2

seconds to keep your hand steady when taking a

picture.

Camera and Gallery

Flashlight

Keep a safe distance when using the flash. Do not use the

flash on people or animals at close range. Do not cover

the flash while taking a picture.

The camera has an LED flashlight for low light conditions.

The following flashlight modes are available: Automatic

( ), Red eye redu. ( ), Forced ( ), and Off ( ).

Select Options > Image setup > Flash > Forced to use the

flashlight.

If the flashlight is set to Off or Automatic during bright

conditions, the flashlight still emits a low light when an

image is captured. This allows the subject of the picture

to see when the picture is taken. There is no flashlight

effect on the resultant picture.

If the flashlight is set to Red eye redu., it decreases the

redness of the eyes in the picture.

Setup settings—Adjust colour and lighting

To enable the camera to reproduce colours and lighting

more accurately, or to add effects to your pictures or

videos, select Options > Image setup or Video setup, and

select from the following options:

Scene—Select a proper scene for the environment in

which you are taking pictures. See ‘Scenes’, p. 45. Every

scene uses its own lighting settings that have been

adjusted according to a certain kind of environment.

Flash (images only)—Set the flash to Automatic, Red eye

redu., Forced, or Off. See ‘Flashlight’, p. 45.

White balance—Select the current lighting condition from

the list. This allows the camera to reproduce colours more

accurately.

Exposure value (images only)—Adjust the exposure time of

the camera.

Colour tone—Select a colour effect from the list.

The screen display changes to match any settings made,

showing you how the change affects the pictures or videos.

The settings return to the default settings when you close

the camera. If you select a new scene, the settings are

replaced by the settings of the selected scene. See ‘Scenes’,

p. 45. If you, however, need to change the setup settings,

you can change them after selecting a scene.

Scenes

A scene helps you to find the right colour and lighting

settings for the current environment. Select a proper scene

for taking pictures or recording video clips from a scenes

list. The settings of each scene have been set according to

a certain style, or environment in which the pictures are

taken. Select Options > Image setup/Video setup >

Scene:

Video scenes

Camera and Gallery

Normal ( )(default)—Use this scene in all conditions.

Night ( )—Use this scene in low light conditions.

Image scenes

Automatic ( ) (default)—Use this scene in all conditions.

Close-up mode ( )—Use this scene for close up

photography.

Night ( )—Use this scene in low light conditions.

Sports ( )—Use this scene to take pictures of fast

moving objects. Note that when you use this scene, the

resolution of the images is reduced from 1600x1200 to

800x600. See Image quality, 46.

Portrait ( )—Use this scene to take portrait pictures,

such as head shots and sitting poses.

Landscape ( )—Use this scene when you take pictures of

objects that are further away.

User defined ( )—Use this scene to create a personalised

scene with your own flash, white balance, exposure value,

and colour tone settings.

When taking pictures, the default scene is Automatic. If

you, however, select the User defined scene, it is set as the

default scene.

To make your own scene suitable for a certain

environment, select User defined scene. In the user scene

you can adjust Based on scene, Flash, , White balance

Exposure value, Colour tone, and Reset user scene

options. To copy the settings of another scene, select

Based on scene and the desired scene.

Adjust still image camera settings

There are two kinds of settings for the still image camera

in the Imaging mode: Image setup settings and main

settings. To adjust Image setup settings, see ‘Setup

settings—Adjust colour and lighting’, p. 45. The setup

settings return to the default settings after you close the

camera, but the main settings remain the same until you

change them again. To change the main settings, select

Options > Settings and from the following:

Image quality—High 2M - Print (resolution 1600x1200),

Med. 0.5M - Email (resolution 800x600), or Low 0.3M -

MMS (resolution 640x480). The better the image quality,

the more memory the image consumes. The quality of a

zoomed picture is lower than that of a nonzoomed picture.

If you want to print the image, select High 2M - Print. If

you want to send it through e-mail, select Med. 0.5M -

Email. To send the image through MMS, select Low 0.3M

- MMS.

Add to album—Select whether you want to save the

image to a certain album in the gallery. If you select Yes,

a list of available albums opens.

Camera and Gallery

Show focus point (image only)—Select Yes if you want

the focus point to be visible on the main display when

taking a picture.

Show captured image—Select Yes if you want to see the

captured image after it is taken, or No if you want to

continue taking pictures immediately.

Memory in use—Select where to store your images.

Take pictures in the Camera mode

The camera in the Camera mode can be activated and

used also during an active call.

1To activate the

Camera mode, turn

the camera unit in

the Fold closed mode.

See ‘Camera mode’,

p. 14. The active

keypad lock is

deactivated, and the

viewfinder appears

on the cover display.

To zoom in or zoom out, move the joystick to the right

or to the left.

2To lock the focus on an object, press the capture key

halfway down. The green locked focus indicator

appears on the display. If the focus was not locked, the

red locked focus indicator appears. Release the capture

key, and press it again halfway down. You can,

however, take the picture without locking the focus.

3To take the picture, press the capture key all the way

down. The picture is automatically saved in the gallery.

See ‘Gallery’, p. 55.

To keep the image on the display after taking it, hold the

capture key down. To return to the viewfinder, release the

capture key.

Camera mode indicators show the following:

• The mode indicator (1)

shows the active scene.

See ‘Scenes’, p. 45.

• The phone memory ( )

and memory card ( )

indicators (2) show where

images are saved.

• The images indicator (3)

estimates how many

images, depending on the

selected image quality, can fit in the remaining

memory of your device or the memory card.

• The green focus indicator (4) is displayed when the

focus point is locked by the viewfinder.

• The self-timer indicator (5) shows that the self-timer is

activated. See ‘You in the picture—self-timer’, p. 44.

Camera and Gallery

• The flash indicator (6) shows if the flash is set to

Automatic ( ), Red eye redu. ( ), Forced ( ), or

Off ( ). Select between the flash modes by moving

the joystick up or down. You can see the flash mode in

the pop-up window on the display.

• The zoom indicator (7) shows the zoom level. Move the

joystick left and right to zoom in and zoom out.

• The joystick indicator ( ) (8) indicates that the

Options menu is available. Press the joystick to open

the Options menu.

To close the camera in the Camera mode, return to the Fold

closed mode by turning the camera unit. See ‘Fold closed

mode’, p. 12.

Camera mode options

To adjust the image settings, press the joystick, and select

from the following options:

Shooting mode—To select a proper scene for the image

capturing environment. See ‘Scenes’, p. 45.

Flip view—To flip the picture 180 degrees. You need this

option when you take a picture, for example, of yourself;

when you turn the camera unit so that it is facing you, the

viewfinder is upside down.

Self-timer—To activate the self-timer. Select 2 seconds or

10 seconds.

Exposure value—To adjust the brightness of the picture.

Settings—To adjust the Image quality, , Memory in use

and Show captured img. settings. See ‘Adjust still image

camera settings’, p. 46.

Edit images

To edit the pictures after taking them, or the ones already

saved in Gallery, select Options > Edit. You can open the

Gallery application in the Imaging mode or in the Fold

open mode.

Options in the edit main view are Apply effect,

Close edit, Undo, Send, Full screen/Normal screen,

Zoom in/Zoom out,Save, Print and Help.

Select Apply effect to, for example, crop and rotate the

image; adjust the brightness, colour, contrast, and

resolution; and add effects, text, clip art, or a frame to the

picture.

To crop an image, select Options > > Apply effect Crop.

Select Manual to crop the image size manually, or select

a predefined aspect ratio from the list. If you select

Manual, a cross appears on the upper left corner of the

image. To move the cross, and select the area to be

cropped, move the joystick. Select Set. Another cross

appears on the lower right corner. Select again the area to

be cropped, and select Crop. The selected areas form the

cropped image.

Camera and Gallery

To reduce redness of the eyes in an image, select

Options > Apply effect > Red eye reduction. Move the

cross onto the eye, and press the joystick. A loop appears

on the display. To resize the loop to fit the size of the eye,

move the joystick. Press the joystick to reduce the redness.

To add clip art to an image, select Options > Apply

effect > Clip-art. Select the item you want to add from

the list, and press the joystick. To move, rotate, and

change the size of the item, select Options > Move,

Resize, or Rotate.

To add text to an image, select Options > Apply effect >

Text. Enter the text, and select OK. To edit the text, select

Options > Move Rotate, Resize, , or Select colour.

Shortcuts in the Fold open mode:

• To view an image in full screen, press . To return to

the normal view, press again.

• To rotate an image clockwise or counterclockwise,

press and .

• To zoom in or zoom out, press and .

Tips on taking good photographs

By turning the swing axis camera, capturing the views in

demanding situations is easier. You can turn the camera

unit clockwise or counterclockwise. See ‘Camera mode’, p.

14.

Picture quality

Use the appropriate picture quality. The camera has

three picture quality modes (High 2M - Print, Med. 0.5M

- Email, and Low 0.3M - MMS). Use the High 2M - Print

setting to make sure that the camera produces the best

picture quality available. Note however, that better picture

quality requires more storage space. For MMS and e-mail

attachments it may be necessary to use the Med. 0.5M -

Email or Low 0.3M - MMS setting. To define the quality

in the image mode in the camera, select Options >

Settings.

Background

Use a simple background. For portraits and other pictures

with people, avoid having your subject in front of a

cluttered, complex background that may distract attention

from the subject. Move the camera, or the subject, when

these conditions cannot be met. Move the camera closer to

the object to take clearer portraits.

Depth

When shooting landscapes and sceneries, add depth to

your pictures by placing objects into the foreground. Note

however, that if the foreground object is too close to

camera, it may be blurred.

Camera and Gallery

• The phone memory

( ) and memory

card ( ) indicators

(1) show where the

video is saved.

• The current video

length indicator (2)

shows elapsed time

and time remaining.

• The scene indicator

(3) shows the active scene. See ‘Scenes’, p. 45.

• The microphone indicator (4) shows that the

microphone is muted.

• The file format indicator (5) indicates the format of the

video clip according to the selected video quality.

• The video quality indicator (6) shows the selected

video clip quality. See ‘Video settings’, p. 51

Shortcuts are as follows:

• Press the joystick up or down to zoom in or zoom out.

The zoom indicator, which appears on the side pane,

shows the zoom level.

• Press the joystick to enter the Video setup settings.

See ‘Setup settings—Adjust colour and lighting’, p. 45.

After a video clip is recorded:

• To immediately play the video clip you just recorded,

select Options > Play.

• If you do not want to keep the video, select Options >

Delete.

• To return to the viewfinder to record a new video, press

the capture key.

• To send the video Via multimedia, Via e-mail, or Via

Bluetooth, select Options > Send. For more

information, see ‘Messaging’, p. 63 and ‘Bluetooth

connection’, p. 97. This option is not available during an

active call.

• To send a video clip to the other party during an active

call, select Options > Send to caller.

• To edit the video, select Options > Edit. See ‘Edit video

clips’, p. 52.

Video settings

There are two kinds of settings for the video recorder in the

Imaging mode: Video setup settings and main settings. To

adjust Video setup settings, see ‘Setup settings—Adjust

colour and lighting’, p. 45. The setup settings return to the

default settings after you close the camera, but the main

settings remain the same until you change them again. To

change the main settings, select Options > Settings and

from the following:

Audio recording—Select On if you want to record both

image and sound.

Video quality—Set the quality of the video clip to High,

Normal, or Sharing. The quality is indicated with one of

Camera and Gallery

Edit video, sound, image, text, and transitions

To create custom video clips, mark and select one or more

video clips, and select Options > Edit.

In the Edit video view, you can insert video clips to make

a custom video clip, and edit the clips by trimming and

adding effects. You can add images and sound clips and

change their duration, and also add text and transitions to

the clip. Press and to move between the video clip

and the sound clip.

To modify the video, select from the following options:

Edit video clip:

Cut—Trims the video clip in the Cut video clip view.

Add colour effect—Inserts a colour effect on the video

clip.

Use slow motion—Slows the speed of the video clip.

Mute sound/Unmute sound—Mutes or unmutes the

original video clip sound.

Move (shown only if two or more video clips have been

inserted)—Moves the video clip to the selected location.

Remove—Removes the video clip from the video.

Duplicate—Makes a copy of the selected video clip.

Edit text (shown only if you have added text)—To move,

remove or duplicate text; change the colour and style of

the text; define how long it stays on the screen; and add

effects to the text.

Edit image (shown only if you have added an image)—To

move, remove or duplicate an image; define how long it

stays on the screen; and set a background or a colour

effect to the image.

Edit sound clip:

Cut—Trims the sound clip in the Cut sound clip view.

Move (shown only if two or more sound clips have been

inserted)—Moves the sound clip to the selected location.

Set duration—Changes the length of the sound clip.

Remove—Removes the sound clip from the video.

Duplicate—Makes a copy of

the selected sound clip.

Edit transition—There are

three types of transitions: at

the start of a video, at the

end of a video, and

transitions between video

clips. A start transition can

be selected when the first

transition of the video is

active.

Insert:

Camera and Gallery

Video clip—Inserts the selected video clip. A thumbnail of

the video clip is shown in the main view. A thumbnail

consists of the first non-black view of the video clip. The

name and length of the selected video clip is also shown.

Image—Inserts the selected image. A thumbnail of the

image is shown in the main view.

Text—Inserts text to the video clip. You can insert a title,

subtitle, or credits.

Sound clip—Inserts the selected sound clip. The name and

length of the selected sound clip is shown in the main

view.

New sound clip—Records a new sound clip to the selected

location.

Movie—To preview the movie in full screen or as a

thumbnail, save the movie, or cut the movie to a proper

size for sending it in a multimedia message.

Tip! To take a snapshot of a video clip, select

Options > Take snapshot in the thumbnail Preview

view or in the Cut video clip view.

To cut a video or sound clip, move to the preferred timeline

and select Options > > Edit video clip Cut or Options >

Edit sound clip > Cut. In the Cut video clip view or Cut

sound clip view, to mark the starting point of the video or

sound clip, select Options > Start mk. To mark the end of

the video or sound clip, select Options > End mark. To play

the cut clip, select Options > Play marked section. To

save the changes, press Done.

To save your video, in the video editor main view, select

Options > Movie > Save. To define the Memory in use,

select Options > Settings. The default is the phone

memory.

Tip! In the Settings view, you can define Default

video name, Default sc. shot name, Resolution, and

Memory in use.

Select Send > Via multimedia, Via e-mail, or Via

Bluetooth if you want to send the video. Contact your

service provider for details of the maximum multimedia

message size that you can send. If your video is too large

to be sent in a multimedia message, the symbol

appears. Select Options > Movie > Edit for MMS to cut

the movie.

Tip! If you want to send a video clip that is over the

maximum multimedia message size allowed by your

service provider, you can send the clip using Bluetooth.

See ‘Send data using a Bluetooth connection’, p. 98. You

can also transfer your videos using Bluetooth into your

Bluetooth-enabled personal computer, or by using a

memory card reader (enhancement).

Camera and Gallery

Gallery

To store and organise your images, video clips, sound clips,

playlists, and streaming links, in the Fold open mode, press

, and select Gallery. To open the gallery in the Imaging

mode, select Options > Go to Gallery. In the Imaging

mode, only the Images & video folder is available.

Tip! To switch from

Gallery to the camera in

the Imaging mode, select

Camera.

Select Images & video ,

Tracks , Sound clips

, Links , or All files

, and press to open

it.

You can browse and open

folders; and mark, copy, and

move items to folders. Sound clips, video clips, .ram files,

and streaming links are opened and played in the

RealPlayer application. See ‘RealPlayer™’, p. 58. You can

also create albums; and mark, copy, and add items to

albums. See ‘Albums’, p. 56.

Tip! You can transfer images from your device to a

compatible PC with Nokia Phone Browser available in

Nokia PC Suite. See the CD-ROM supplied with your

device.

Press to open a file. Videos, music, and sound clips

open in RealPlayer. See ‘View images and video clips’, p.

55.

To copy or move files to the memory card or to phone

memory, select a file and Options > > Organise Copy to

memory card/Move to memory card or Copy to phone

mem./Move to phone mem.. Files stored on the memory

card are indicated with .

To download files into Gallery in one of the main folders

using the browser, select the download icon, for example

( ) to download images. The browser opens, and you can

select a bookmark from which the site can download.

View images and video clips

Pictures taken and video clips recorded with the camera

are stored in the Images & video folder in Gallery. The

quality of a video clip is indicated with one of the

following icons: (High), (Normal), and (Sharing).

For more information on video quality, see ‘Video settings’,

p. 51. Images and video clips can also be sent to you in a

multimedia message, as an e-mail attachment, or through

a Bluetooth connection. To be able to view a received

image or video clip in the gallery or in the media player,

Imaging

used when connecting. Contact your service provider for

the correct settings.

Proxy settings:

• .Use proxy—To use a proxy server, select Yes

•Proxy serv. address—Enter the IP address of the

proxy server.

•Proxy port number—Enter the port number of the

proxy server.

Glossary: Proxy servers are intermediate servers between

media servers and their users. Some service providers

use them to provide additional security or speed up

access to browser pages that contain sound or video

clips.

Network settings:

•Default access point—Scroll to the access point you

want to use to connect to the Internet, and press .

•Online time—Set the time for RealPlayer to

disconnect from the network when you have paused a

media clip playing through a network link, select User

defined, and press . Enter the time, and select OK.

•Lowest UDP port—Enter the lowest port number of

the servers port range. The default value is 6970.

•Highest UDP port—Enter the highest port number of

the servers port range. The default value is 32000.

Select Options > Advanced settings to edit the

bandwidth values for different networks.

Movie Director

To create muvees, press , and select Imaging > Movie.

muvees are short, edited video clips that may contain

video, images, music, and text. Quick muvee is created

automatically by Movie director after you select the style

for the muvee. Movie director randomly selects images,

and uses the default music and text associated with the

chosen style. Every style has its own font style, colour,

music, and pace. In a Custom muvee you can select your

own video and music clips, images and style, and add

opening and closing message. You can send muvees with

MMS.

Open Movie, and press or to move between the

and views. You can also return to the main

view from the view by selecting Done.

The view contains a list of video clips that you can

Play, Send, Rename, and Delete.

Create a quick muvee

1In the Movie director main view, select Quick muvee.

2Select a style for the muvee from the style list. The

created muvee is saved in Movie director muvee list.

The muvee is played automatically after saving.

Imaging

To let Movie director randomly include or exclude parts

of the video clip, select Options > Mark all as neutral.

Settings

Select Settings to edit the following options:

Memory in use—Select where to store your muvees.

Resolution—Select the resolution of your muvees.

Default muvee name—Set a default name for the

muvees.

Messaging

Press , and select Messaging. In Messaging, you can

create, send, receive, view, edit, and organise text

messages, multimedia messages, e-mail messages, and

special text messages containing data. You can also

receive messages and data through a Bluetooth

connection, receive Web service messages, cell broadcast

messages, and send service commands.

Note: Only devices that have compatible features

can receive and display multimedia messages. The

appearance of a message may vary depending on the

receiving device.

When you open Messaging, you can see the New message

function and a list of folders:

Inbox—Contains received messages except e-mail and

cell broadcast messages. E-mail messages are stored in the

Mailbox.

My folders—For organising your messages into

folders.

Mailbox—In Mailbox you can connect to your remote

mailbox to retrieve your new e-mail messages or view your

previously retrieved e-mail messages offline. See ‘E-mail’,

p. 75.

Drafts—Stores draft messages that have not been

sent.

Sent—Stores the last 20 messages that have been

sent excluding messages sent using a Bluetooth

connection. To change the number of messages to be

saved, see ‘Other settings’, p. 77.

Outbox—A temporary storage place for messages

waiting to be sent.

Reports ( )—You can request the network to send

you a delivery report of the text messages and multimedia

messages you have sent. Receiving a delivery report of a

multimedia message that has been sent to an e-mail

address might not be possible.

Tip! When you have opened any of the default

folders, you can switch between the folders by pressing

or .

To enter and send service requests (also known as USSD

commands), such as activation commands for network

services, to your service provider, select Options > Service

command in the main view of Messaging.

Cell broadcast allows you to receive messages on

various topics, such as weather or traffic conditions from

Messaging

your service provider. For available topics and relevant

topic numbers, contact your service provider. In the main

view of Messaging, select Options > Cell broadcast. In

the main view you can see the status of a topic, a topic

number, name, and whether it has been flagged ( ) for

follow-up.

Options in Cell broadcast are Open, Subscribe/

Unsubscribe, Hotmark/Remove hotmark, Topic,

Settings, Help, and Exit.

Cell broadcast messages cannot be received in UMTS

networks. A packet data connection may prevent cell

broadcast reception.

Write text

Traditional text input

and indicate the selected case.

means that the first letter of the word is written in

uppercase, and all other letters are automatically written

in lowercase. indicates number mode.

The indicator is shown on the top right of the

display when you are writing text using traditional text

input.

• Press a number key ( — ) repeatedly until the

desired character appears. There are more characters

available for a number key than are printed on the key.

• To insert a number, press and hold the number key.

• To switch between letter and number mode, press and

hold .

• If the next letter is located on the same key as the

present one, wait until the cursor appears (or press

to end the time-out period), and enter the letter.

• To erase a character, press . Press and hold to

clear more than one character.

• The most common punctuation marks are available

under . Press repeatedly to reach the desired

punctuation mark.

Press to open a list of special characters. Use

to move through the list, and press Select to select a

character.

• To insert a space, press . To move the cursor to the

next line, press three times.

• To switch between the different character modes, press

Predictive text input—Dictionary

You can enter any letter with a single key press. Predictive

text input is based on a built-in dictionary to which you

can also add new words. When the dictionary becomes full,

the latest added word replaces the oldest.

Messaging

1To activate predictive text

input, press , and

select Dictionary on. This

activates predictive text

input for all editors in the

phone. is shown on

the top right of the display

when you write text using

predictive text input.

2To write the desired word,

press the keys — . Press each key only once for

one letter. For example, to write ‘Nokia’ when the

English dictionary is selected, press for N, for

o, for k, for i, and for a.

The word suggestion changes after each key press.

3When you finish writing the word and it is correct, to

confirm it, press , or press to add a space.

If the word is not correct, press repeatedly to view

the matching words the dictionary has found one by

one, or press , and select Dictionary > Matches.

If the ? character is shown after the word, the word you

intended to write is not in the dictionary. To add a word

to the dictionary, select Spell, enter the word using

traditional text input, and select OK. The word is added

to the dictionary. When the dictionary becomes full, a

new word replaces the oldest added word.

4Start writing the next word.

Tip! To set predictive text input on or off, press

twice quickly.

Tips on predictive text input

To erase a character, press . Press and hold to clear

more than one character.

To change between the different character modes, press

. If you press quickly twice, predictive text input

is turned off.

Tip! Predictive text input tries to guess which

commonly used punctuation mark (.,?!‘) is needed. The

order and availability of the punctuation marks depend

on the language of the dictionary.

To insert a number in letter mode, press and hold the

desired number key.

To switch between letter and number mode, press and

hold .

The most common punctuation marks are available under

. Press and then repeatedly to search for the

desired punctuation mark.

Press and hold to open a list of special characters.

Press repeatedly to view the matching words the

dictionary has found one by one.

Press , select Dictionary, and press to select one

of the following options:

Messaging

language options like Chinese, take up more space

limiting the number of characters that can be sent in a

single message. In the navigation bar, you can see the

message length indicator counting backwards. For

example, 10 (2) means that you can still add 10 characters

for the text to be sent as two messages.

Note: E-mail messages are automatically placed in

Outbox before sending. If sending does not succeed,

the e-mail is left in the Outbox with the Failed status.

Tip! In Messaging you can also create presentations

and send them in a multimedia message. In the

multimedia message editor view, select Options >

Create presentation (shown only if MMS creation

mode is set to Guided or Free). See ‘Multimedia

messages’, p. 74.

Tip! When you send a multimedia message to an

e-mail address or a device that supports the receiving

of large images, use the larger image size. If you are

not sure of the receiving device, or the network does

not support sending large files, it is recommended that

you use a smaller image size or a sound clip that is no

longer than 15 seconds. To change the setting, select

Options > Settings > Multimedia message > Image

size in the Messaging main view.

Receive MMS and e-mail settings

You may receive the settings in a text message from your

network operator or service provider. See ‘Data and

settings’, p. 69.

For availability of and subscription to data services,

contact your network operator or service provider. Follow

the instructions given by your service provider.

Enter the MMS settings manually:

1Select Tools > Settings > Connection > Access points,

and define the settings for a multimedia messaging

access point. See ‘Connection settings’, p. 107.

2Select Messaging > Options > Settings > Multimedia

message > Access point in use and the access point

you created to be used as the preferred connection. See

also ‘Multimedia messages’, p. 74.

Before you can send, receive, retrieve, reply to, and forward

e-mail, you must do the following:

• Configure an Internet access point (IAP) correctly. See

‘Connection settings’, p. 107.

• Define your e-mail settings correctly. See ‘E-mail’, p.

75. You need to have a separate e-mail account. Follow

the instructions given by your remote mailbox and

Internet service provider (ISP).

Messaging

Inbox—receive messages

Inbox Inbox icons: —unread messages in ; —

unread text message; —unread multimedia message;

—data received through a Bluetooth connection.

When you receive a message, and the text 1 new

message are shown in the standby mode. Select Show to

open the message. To open a message in Inbox, scroll to it,

and press .

Multimedia messages

Important: Excercise caution when opening

messages. Multimedia message objects may contain

malicious software or otherwise be harmful to your device

or PC.

You may receive a notification that you have received a

multimedia message that is saved in the multimedia

message centre. To start a packet data connection to

retrieve the message to your phone, select Options >

Retrieve.

When you open a multimedia message ( ), you may see

an image and a message, and simultaneously listen to a

sound through the loudspeaker ( is shown if sound is

included). Click the arrow in the icon to listen to the sound.

To see what kinds of media objects have been included in

the multimedia message, open the message, and select

Options > Objects. You can choose to save a multimedia

object file in your phone or send it, for example, through

a Bluetooth connection to another compatible device.

To view received multimedia presentations, select

Options > Play presentation.

(including ringing tones), and other content from being

copied, modified, transferred or forwarded.

Data and settings

Your phone can receive many kinds of text messages that

contain data ( ), also called over-the-air (OTA)

messages:

Configuration message—You may receive a text message

service number, voice mailbox number, Internet access

point settings, access point login script settings, or e-mail

settings from your network operator, service provider, or

company information management department in a

configuration message. To save the settings, select

Options > Save all.

Business card—To save the information to Contacts,

select Options > Save business card. Certificates or sound

files attached to the business card are not saved.

Messaging

Multimedia retrieval—Select how you want to receive

multimedia messages. To receive multimedia messages

automatically in your home network, select Aut. in home

network. Outside your home network, you receive a

notification that you have received a multimedia message

that is saved in the multimedia message centre. You can

select if you want to retrieve the message to your phone.

When you are outside your home network, sending and

receiving multimedia messages may cost you more.

If you select Multimedia retrieval > Always automatic,

your phone automatically makes an active packet data

connection to retrieve the message both in and outside

your home network.

Allow anon. messages—Select No if you want to reject

messages from an anonymous sender.

Receive adverts—Define whether you want to receive

multimedia message advertisements.

Receive report ( )—Select Yes if you want the status of

the sent message to be shown in the log. Receiving a

delivery report of a multimedia message that has been sent

to an e-mail address might not be possible.

Deny report sending—Select Yes if you do not want your

phone to send delivery reports of received multimedia

messages.

Message validity—If the recipient of a message cannot be

reached within the validity period, the message is removed

from the multimedia messaging centre. The network must

support this feature. Maximum time is the maximum

amount of time allowed by the network.

Tip! You may also obtain the multimedia and e-mail

settings from your service provider through a

configuration message. Contact your service provider

for more information. See ‘Data and settings’, p. 69.

E-mail

Select Messaging > Options > Settings > E-mail, or in

the mailbox main view, select Options > E-mail settings,

and select from the following:

Mailbox in use—Select which mailbox you want to use for

sending e-mail.

Mailboxes—Opens a list of mailboxes that have been

defined. If no mailboxes have been defined, you are

prompted to do so. Select a mailbox to change the

following settings: Mailbox settings, User settings, and

Automatic retrieval.

Mailbox settings:

Mailbox name—Enter a descriptive name for the mailbox.

Calendar

Shortcut: Press any key ( — ) in any calendar

view. A meeting entry opens, and the characters you

enter are added to the Subject field.

Tip! Regularly back up the phone information to the

memory card. You can restore the information, such as

calendar entries, to the phone later. See ‘Memory card

tool’, p. 19.

Create calendar entries

1 Press , and select

Calendar > Options >

New entry and from the

following:

Meeting—To remind you

of an appointment that

has a specific date and

time.

Memo—To write a general

entry for a day.

Anniversary—To remind

you of birthdays or special

dates. Anniversary entries are repeated every year.

2Fill in the fields. Use to move between fields.

Alarm (meetings and anniversaries)—Select On, and

press to fill in the Alarm time and Alarm date

fields. in the day view indicates an alarm.

Repeat—Press to change the entry to be repeating

( is shown in the day view).

Repeat until—You can set an end date for the repeated

entry.

Synchronisation:

Private—after synchronisation the calendar entry can

be seen only by you and it will not be shown to others

with online access to view the calendar.

Public—The calendar entry is shown to others who

have access to view your calendar online.

None—The calendar entry will not be copied to your PC

when you synchronise.

3To save the entry, select Done.

To stop a calendar alarm, select Silence to turn off the

calendar alarm tone. The reminder text stays on the

screen. Select Stop to end the calendar alarm. Select

Snooze to set the alarm to snooze.

Tip! To send a calendar note to a compatible phone,

select Options > Send > Via text message, Via

multimedia, or Via Bluetooth.

Specyfikacje produktu

Marka:	Nokia
Kategoria:	Przenośny
Model:	N90

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Nokia N90, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Przenośny Nokia

Nokia 9100 Instrukcja

4 Lipca 2024

Nokia 8250 Instrukcja

3 Lipca 2024

Nokia 8800 arte Instrukcja

3 Lipca 2024

Nokia n81 8gb Instrukcja

3 Lipca 2024

Nokia N95 Instrukcja

3 Lipca 2024

Nokia e55 Instrukcja

3 Lipca 2024

Nokia 6124 classic Instrukcja

3 Lipca 2024

Nokia x3 Instrukcja

3 Lipca 2024

Nokia C1-02 Instrukcja

3 Lipca 2024

Nokia 5030 Instrukcja

3 Lipca 2024

Instrukcje Przenośny

Najnowsze instrukcje dla Przenośny

Huawei T211 Instrukcja

15 Stycznia 2025

Swissvoice mp01 Instrukcja

12 Stycznia 2025

Geemarc CL8360 Instrukcja

11 Stycznia 2025

HTC P3300 Instrukcja

11 Stycznia 2025

Alcatel IP Touch 600 Instrukcja

21 Grudnia 2024

Sanyo Katana II - Sprint Instrukcja

17 Grudnia 2024

Sunstech Arrow Instrukcja

5 Października 2024

Swisstone SD 530 Instrukcja

5 Października 2024

Emporia EUPHORIA 3G Instrukcja

5 Października 2024

Emporia Telme C135 Instrukcja

5 Października 2024