Instrukcja obsługi Nokia 6125

Nokia Przenośny 6125

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Nokia 6125 (125 stron) w kategorii Przenośny. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/125

Nokia 6125 User Guide

9247913

Issue 1

DECLARATION OF CONFORMITY

We, NOKIA CORPORATION declare under our sole responsibility that the product RM-178 is in conformity with the provisions

of the following Council Directive:1999/5/EC.A copy of the Declaration of Conformity can be found at http://

www.nokia.com/phones/declaration_of_conformity/.

The crossed-out wheeled bin means that within the European Union the product must be taken to separate

collection at the product end-of-life. This applies to your device but also to any enhancements marked with this

symbol. Do not dispose of these products as unsorted municipal waste.

Nokia, Nokia Connecting People, Pop-Port, PC Suite, and the Nokia Original Enhancements logos are trademarks or registered trademarks of

Nokia Corporation. Other company and product names mentioned herein may be trademarks or trade names of their respective owners.

Nokia tune is a sound mark of Nokia Corporation.

US Patent No 5818437 and other pending patents. T9 text input software

Includes RSA BSAFE cryptographic or security protocol software from RSA Security.

Java is a trademark of Sun Microsystems, Inc.

Bluetooth is a registered trademark of Bluetooth SIG, Inc.

This product is licensed under the MPEG-4 Visual Patent Portfolio License (i) for personal and noncommercial use in connection with

information which has been encoded in compliance with the MPEG-4 Visual Standard by a consumer engaged in a personal and

0434

noncommercial activity and (ii) for use in connection with MPEG-4 video provided by a licensed video provider. No license is granted or shall be

implied for any other use. Additional information, including that related to promotional, internal, and commercial uses, may be obtained from

MPEG LA, LLC. See <http://www.mpegla.com>.

The information contained in this user guide was written for the Nokia 6125 product. Nokia operates a policy of ongoing development. Nokia

reserves the right to make changes to any of the products described in this document without prior notice.

Under no circumstances shall Nokia be responsible for any loss of data or income or any special, incidental, consequential or indirect damages

howsoever caused.

The contents of this document are provided "as is". Except as required by applicable law, no warranties of any kind, either express or implied,

including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose, are made in relation to the

accuracy, reliability or contents of this document. Nokia reserves the right to revise this document or withdraw it at any time without prior

notice.

The availability of particular products may vary by region. Please check with the Nokia dealer nearest to you.

EXPORT CONTROLS This device may contain commodities, technology, or software subject to export laws and regulations from the U.S. and

other countries. Diversion contrary to law is prohibited.

Contents

For your safety...................................................................................................................................... 9

1. General information ....................................................................................................................... 13

Access codes......................................................................................................................................................................................... 13

Copyright protection .......................................................................................................................................................................... 14

Configuration settings service......................................................................................................................................................... 14

Download content and applications.............................................................................................................................................. 15

Nokia support and contact information....................................................................................................................................... 15

2. Get started ...................................................................................................................................... 16

SIM card and battery installation................................................................................................................................................... 16

Charge the battery.............................................................................................................................................................................. 17

Memory card installation.................................................................................................................................................................. 18

Switch the phone on and off........................................................................................................................................................... 20

Open the fold........................................................................................................................................................................................ 20

Normal operating position................................................................................................................................................................ 21

Wrist strap............................................................................................................................................................................................. 22

3. Your phone...................................................................................................................................... 23

Keys and parts...................................................................................................................................................................................... 23

Standby mode....................................................................................................................................................................................... 24

Indicators and icons ........................................................................................................................................................................... 27

Keypad lock (keyguard)...................................................................................................................................................................... 28

4. Call functions.................................................................................................................................. 29

Make a call............................................................................................................................................................................................ 29

Speed dialing ........................................................................................................................................................................................ 29

Enhanced voice dialing...................................................................................................................................................................... 29

Answer or reject a call....................................................................................................................................................................... 30

Options during a call.......................................................................................................................................................................... 31

5. Phone menus................................................................................................................................... 32

Menu views........................................................................................................................................................................................... 32

Access a menu function .................................................................................................................................................................... 32

6. Messaging ....................................................................................................................................... 33

Text messages....................................................................................................................................................................................... 33

SIM messages....................................................................................................................................................................................... 36

Multimedia messages......................................................................................................................................................................... 36

Nokia Xpress audio messaging........................................................................................................................................................ 41

Instant messaging............................................................................................................................................................................... 42

E-mail application............................................................................................................................................................................... 47

Voice messages .................................................................................................................................................................................... 49

Info messages....................................................................................................................................................................................... 50

Service commands .............................................................................................................................................................................. 50

Delete messages .................................................................................................................................................................................. 50

Message settings................................................................................................................................................................................. 51

7. Contacts .......................................................................................................................................... 55

Search..................................................................................................................................................................................................... 55

Save names and phone numbers .................................................................................................................................................... 55

Save numbers, items, or an image.................................................................................................................................................. 55

Copy a contact..................................................................................................................................................................................... 56

Edit contact details............................................................................................................................................................................. 56

Delete contacts or details ................................................................................................................................................................. 56

Business cards ...................................................................................................................................................................................... 57

My presence.......................................................................................................................................................................................... 57

Subscribed names................................................................................................................................................................................ 58

Settings .................................................................................................................................................................................................. 59

Groups .................................................................................................................................................................................................... 60

Service and my numbers ................................................................................................................................................................... 60

8. Call log ............................................................................................................................................ 61

Positioning information..................................................................................................................................................................... 61

9. Settings ........................................................................................................................................... 63

Profiles.................................................................................................................................................................................................... 63

Themes.................................................................................................................................................................................................... 63

Tones....................................................................................................................................................................................................... 64

Display .................................................................................................................................................................................................... 64

Time and date....................................................................................................................................................................................... 66

My shortcuts......................................................................................................................................................................................... 67

Connectivity.......................................................................................................................................................................................... 69

Call........................................................................................................................................................................................................... 74

Phone ...................................................................................................................................................................................................... 75

Enhancements...................................................................................................................................................................................... 76

Configuration ....................................................................................................................................................................................... 77

Security .................................................................................................................................................................................................. 77

Restore factory settings .................................................................................................................................................................... 78

10.Operator menu .............................................................................................................................. 79

11.Gallery............................................................................................................................................ 80

Format memory card.......................................................................................................................................................................... 80

12.Media ............................................................................................................................................. 81

Camera ................................................................................................................................................................................................... 81

Media player......................................................................................................................................................................................... 82

Music player.......................................................................................................................................................................................... 83

Radio....................................................................................................................................................................................................... 84

Recorder................................................................................................................................................................................................. 86

Equalizer ................................................................................................................................................................................................ 87

Stereo widening................................................................................................................................................................................... 87

13.Push to talk ................................................................................................................................... 88

Connect and disconnect.................................................................................................................................................................... 88

Make and receive a PTT call ............................................................................................................................................................. 88

Callback requests................................................................................................................................................................................. 90

Add a one-to-one contact................................................................................................................................................................ 91

PTT channels ......................................................................................................................................................................................... 92

PTT settings ........................................................................................................................................................................................... 93

14.Organizer ....................................................................................................................................... 95

Alarm clock ........................................................................................................................................................................................... 95

Calendar................................................................................................................................................................................................. 96

To-do list................................................................................................................................................................................................ 96

Notes....................................................................................................................................................................................................... 97

Countdown timer ................................................................................................................................................................................ 98

Stopwatch ............................................................................................................................................................................................. 98

15.Applications................................................................................................................................. 100

Games................................................................................................................................................................................................... 100

Collection............................................................................................................................................................................................. 100

16.Web .............................................................................................................................................. 102

Technology background................................................................................................................................................................... 102

Service provider ................................................................................................................................................................................. 102

Access service..................................................................................................................................................................................... 103

Browse.................................................................................................................................................................................................. 104

Security settings................................................................................................................................................................................ 105

Bookmarks........................................................................................................................................................................................... 106

Download settings ............................................................................................................................................................................ 107

Service inbox ...................................................................................................................................................................................... 107

Cache memory.................................................................................................................................................................................... 107

Browser security ................................................................................................................................................................................ 108

17.SIM services................................................................................................................................. 111

18.Computer connectivity ............................................................................................................... 112

USB data storage............................................................................................................................................................................... 112

Nokia PC Suite.................................................................................................................................................................................... 112

EGPRS, GPRS, HSCSD, and CSD..................................................................................................................................................... 112

Data communication applications ............................................................................................................................................... 113

19.Enhancements ............................................................................................................................. 114

20.Reference information................................................................................................................ 115

Battery information.......................................................................................................................................................................... 115

Care and maintenance...................................................................................................................... 118

Additional safety information ......................................................................................................... 119

Index.................................................................................................................................................. 123

For your safety

Read these simple guidelines. Not following them may be dangerous or illegal. Read the complete user guide for further

information.

SWITCH ON SAFELY

Do not switch the device on when wireless phone use is prohibited or when it may cause interference or danger.

ROAD SAFETY COMES FIRST

Obey all local laws. Always keep your hands free to operate the vehicle while driving. Your first consideration

while driving should be road safety.

INTERFERENCE

All wireless phones may get interference, which could affect performance.

SWITCH OFF IN HOSPITALS

Follow any regulations or rules. Switch the phone off near medical equipment.

SWITCH OFF IN AIRCRAFT

Follow any restrictions. Wireless devices can cause interference in aircraft.

SWITCH OFF WHEN REFUELING

Do not use the phone at a refueling point. Do not use near fuel or chemicals.

SWITCH OFF NEAR BLASTING

Follow any restrictions. Do not use the phone where blasting is in progress.

USE SENSIBLY

Use only in the normal position as explained in the product documentation. Do not touch the antenna

unnecessarily.

QUALIFIED SERVICE

Only qualified personnel may install or repair this product.

ENHANCEMENTS AND BATTERIES

Use only approved enhancements and batteries. Do not connect incompatible products.

WATER-RESISTANCE

Your phone is not water-resistant. Keep it dry.

BACKUP COPIES

Remember to make back-up copies or keep a written record of all important information.

CONNECTING TO OTHER DEVICES

When connecting to any other device, read its user guide for detailed safety instructions. Do not connect

incompatible products.

EMERGENCY CALLS

Ensure the phone is switched on and in service. Press the end key as many times as needed to clear the display

and return to the start screen. Enter the emergency number, then press the call key. Give your location. Do not

end the call until given permission to do so.

■About your device

The wireless device described in this guide is approved for use on the EGSM 850, 900, 1800, and 1900 networks. Contact your

service provider for more information about networks.

When using the features in this device, obey all laws and respect privacy and legitimate rights of others.

When taking and using images or video clips, obey all laws and respect local customs as well as privacy and legitimate rights

of others.

Warning: To use any features in this device, other than the alarm clock, the phone must be switched on. Do not

switch the device on when wireless phone use may cause interference or danger.

■Network services

To use the phone you must have service from a wireless service provider. Many of the features in this device depend on

features in the wireless network to function. These network services may not be available on all networks or you may have to

make specific arrangements with your service provider before you can utilize network services. Your service provider may

need to give you additional instructions for their use and explain what charges will apply. Some networks may have

limitations that affect how you can use network services. For instance, some networks may not support all language-

dependent characters and services.

Your service provider may have requested that certain features be disabled or not activated in your device. If so, they will not

appear on your device menu. Your device may also have been specially configured. This configuration may include changes in

menu names, menu order, and icons. Contact your service provider for more information.

This device supports WAP 2.0 protocols (HTTP and SSL) that run on TCP/IP protocols. Some features of this device, such as

multimedia messaging service (MMS), browsing, e-mail application, instant messaging, remote synchronization, and content

downloading using the browser or MMS, require network support for these technologies.

■Shared memory

The following features in this device may share memory: gallery, contacts, text messages, multimedia messages, instant

messages, e-mail, calendar, to-do notes, and JavaTM games and applications. Use of one or more of these features may reduce

the memory available for the remaining features sharing memory. For example, saving many Java applications may use all of

the available memory. Your device may display a message that the memory is full when you try to use a shared memory

feature. In this case, delete some of the information or entries stored in the shared memory features before continuing. Some

of the features, such as text messages, may have a certain amount of memory specially allotted to them in addition to the

memory shared with other features.

■Enhancements

A few practical rules about accessories and enhancements.

• Keep all accessories and enhancements out of the reach of small children.

• When you disconnect the power cord of any accessory or enhancement, grasp and pull the plug, not the cord.

• Check regularly that enhancements installed in a vehicle are mounted and are operating properly.

• Installation of any complex car enhancements must be made by qualified personnel only.

1. General information

Congratulations on your purchase of this Nokia mobile phone. Some of its other features include a calendar, a

clock, an alarm clock, a radio, a music player, and a built-in camera.

■Access codes

Security code

The security code (5 to 10 digits) helps to protect your phone against unauthorized use. The preset code is

12345. To change the code, and to set the phone to request the code, see Security p. 77.

If you enter an incorrect security code five times in succession, the phone ignores further entries of the code.

Wait for five minutes, and enter the code again.

PIN codes

The personal identification number (PIN) code and the universal personal identification number (UPIN) code

(four to eight digits) help to protect your SIM card against unauthorized use. See Security p. 77. The PIN code is

usually supplied with the SIM card. To set the phone to request the PIN code, see Security p. 77.

The PIN2 code (four to eight digits) may be supplied with the SIM card and is required for some functions.

The module PIN is required to access the information in the security module. See Security module p. 108. The

module PIN is supplied with the SIM card if the SIM card has a security module in it.

The signing PIN is required for the digital signature. See Digital signature p. 109. The signing PIN is supplied

with the SIM card if the SIM card has a security module in it.

PUK codes

The personal unblocking key (PUK) code and the universal personal unblocking key (UPUK) code (eight digits) is

required to change a blocked PIN code and UPIN code, respectively. The PUK2 code is required to change a

blocked PIN2 code.

If the codes are not supplied with the SIM card, contact your service provider for the codes.

Barring password

The barring password (four digits) is required when using Call barring service. See Security p. 77. You can

obtain the password from your service provider.

If you enter an incorrect barring password three times in succession, the password is blocked. Contact your

service provider for assistance.

■Copyright protection

transferred, or forwarded.

■Configuration settings service

To use some of the network services, such as mobile Internet services, MMS, or remote Internet server

synchronization, your phone needs the correct configuration settings. You may be able to receive the settings

directly as a configuration message. After receiving the settings, you need to save them on your phone. The

service provider may provide a PIN that is needed to save the settings. For more information on availability of

the settings, contact your service provider.

When you have received a configuration message, Configuration sett. received is displayed.

To save the settings, select Show >Save. If the phone requests Enter settings' PIN:, enter the PIN code for the

settings, and select OK. To receive the PIN code, contact the service provider who supplies the settings. If no

settings are saved yet, these settings are saved and set as default configuration settings. Otherwise, the phone

asks, Activate saved configuration settings?.

To discard the received settings, select Show > Discard.

To edit the settings, see Configuration p. 77.

■Download content and applications

You may be able to download content, such as themes, tones, and video clips, to the phone (network service).

Select the download function (for example, in the Gallery menu). To access the download function, see the

respective menu descriptions. For availability of different services, pricing, and tariffs, contact your service

provider.

Important: Use only services that you trust and that offer adequate security and protection against harmful

software.

■Nokia support and contact information

Check www.nokia.com/support or your local Nokia Web site for the latest additional information, downloads,

and services related to your Nokia product.

On the Web site, you can get information on the use of Nokia products and services. If you need to contact

customer service, check the list of local Nokia Care contact centers at www.nokia.com/customerservice.

For maintenance services, check your nearest Nokia Care services location at www.nokia.com/repair.

2. Get started

■SIM card and battery installation

Keep all SIM cards out of the reach of small children. For availability and information on using SIM card services, contact

your SIM card vendor. This may be the service provider, network operator, or another vendor. Before installing the SIM card

and removing the battery, always switch the device off, and disconnect the charger.

The SIM card and its contacts can easily be damaged by scratches or bending, so be careful when handling,

inserting, or removing the card.

Note: Always switch off the power, and disconnect the charger and any other device before removing the cover.

Avoid touching electronic components while changing the cover. Always store and use the device with the cover

attached.

To install the SIM card:

1. Press firmly and slide the top of the back cover to release it; then continue

sliding the back cover to remove and lift it from the phone.

2. After you have removed the back cover, insert your finger under the battery, and

lift it as shown.

For availability of approved enhancements, please check with your dealer.

1. Connect the charger to a standard wall outlet.

2. Insert the charger plug into the round jack in the bottom of the

phone. If the battery is completely discharged, it may take a few

minutes before the charging indicator appears on the display or

before any calls can be made.

3. Disconnect the charger from the phone when the battery is fully

charged.

You can use the phone while the charger is connected. The charging time

depends on the charger and the battery used. For example, charging a

BL-4C battery with the AC-3 charger takes approximately 2 hours and

20 minutes while the phone is in the standby mode.

■Memory card installation

Use only compatible microSD cards with this device. Other memory cards do not fit in the memory

card slot and are not compatible with this device. Using an incompatible memory card may damage

the memory card as well as the device, and data stored on the incompatible card may be corrupted.

Use only memory cards approved by Nokia. While Nokia conforms to the approved

industry standards in the use of memory cards, full compatibility across all brands cannot

be assured due to product quality varying among third party manufacturers.

You can use a memory card to extend the memory of the Gallery. See Gallery p. 80. You can insert or change

the memory card without turning the phone off.

Important: Do not remove the memory card in the middle of an operation when the card is being accessed.

Removing the card in the middle of an operation may damage the memory card as well as the device, and data

stored on the card may be corrupted.

To insert the memory card, use a fingernail as a lever, place it in the recessed area of the memory card holder

and swing the holder open (1). Place the memory card in the card holder (2). Make sure that the memory card is

properly inserted and that the gold-colored contacts on the card are facing upwards. Close the memory card

holder (3).

You can use the memory card to save your multimedia files, such as video clips, sound files, and images, in the

Gallery.

To remove the memory card, use a finger nail as a lever. Place it in the recessed area of the memory card holder

and swing the holder open. Push gently with a finger nail against the card to loosen it from the holder; then

pull the card out. Close the memory card holder.

To format the memory card, see Format memory card p. 80.

■Switch the phone on and off

Press and hold the end key until the phone switches on or off. If the phone

asks for a PIN, enter the code, and select OK.

Plug and play service

When you turn on your phone for the first time, and the phone is in the standby mode, you may be asked to get

the configuration settings from your service provider (network service). Confirm or reject the query. See

Connect to service provider support in Configuration p. 77 and Configuration settings service p. 14.

■Open the fold

When you open the fold of the phone, it opens up to approximately 155

degrees. Do not try to force the fold open more.

3. Your phone

■Keys and parts

• Earpiece (1)

• Main display (2)

• Call key (3)

• Left, middle, and right selection keys (4)

• Four-way navigation key (5)

• End key ends calls (short key press) and turns phone on and off (long key

press) (6)

• Keypad (7)

• Camera lens (8)

• Mini display (9)

• Loudspeaker (10)

• Camera release key (11)

• Memory card holder (12)

• Pop-Port connectorTM (13)

• Charger connector (14)

• Infrared (IR) port (15)

• Volume is activated by volume down/up key (short key press), voice

dialing is activated by volume down key (long key press) and Push to

talk (PTT) is activated by volume up key (long key press) (16)

■Standby mode

When you turn on your phone, the first screen that appears is the start screen,

which indicates your phone is in the standby mode. When your phone is in the

standby mode, the selection keys access specific functions, and the indicators

appear on the start screen. Indicators show the status of the phone.

• Network signal strength (1)

• Battery strength indicator (2)

• Clock (3) — if the time is set to appear on the display. See Time and date in

Settings p. 66.

• The name of the service provider or the operator logo (4)

• Calendar (5) — the date is displayed if it is set to appear on the display and

the active standby is not set. See Active standby mode p. 25 and Time and

date p. 66.

• Active standby (6). See Active standby mode on p. 25.

• The left selection key (7) is Go to or a shortcut to another function. See Left selection key p. 67.

• The middle selection key (8) mode is Menu.

• The right selection key (9) may be Names to access the list of contacts in the Contacts menu, an operator

specific name to access an operator specific Web site, or a shortcut to a function that you selected. See

Right selection key p. 68.

Active standby mode

In the active standby mode, the phone can display separate content item

windows, such as general indicators and operator logo (1), shortcuts (2),

audio functions (3), and the calendar (4). To select whether the active standby

is shown, see Active standby in Standby mode settings p. 64.

The active standby is in passive mode when the middle selection key (5) is

Menu; you can only view content. To activate the navigation mode and scroll

through the content, use the navigation key. To change the key for accessing

the navigation mode, see Enabling standby in Standby mode settings p. 64.

When the arrow indicators are shown, you can scroll the item left and right.

To personalize and organize the active standby content, select Options >

Active standby. See Standby mode settings p. 64.

To exit the navigation mode, select Exit. If no keys are pressed after a certain

period of time, the phone automatically returns to the passive mode.

Content items in navigation mode

Shortcut bar — To select a shortcut, scroll to the function you want and select it. To change or organize the

shortcuts when in the navigation mode, select Options > Active standby > Options > Personalise, scroll to the

shortcut window, and select Options > Select links or Organise links.

Audio applications — To turn on the radio or the music player, scroll to and select it. To change a track in the

music player or a channel in the radio, scroll left or right. To start the radio channel search, scroll and hold left

or right.

Calendar — To view today’s notes, select the one you want. To view the notes for the previous or next days,

scroll left or right.

My note — To enter a note, select the content window, write your note, and save it.

My presence — To change your presence status information, select the content item.

Countdown timer — To start the countdown timer, select the content item. The remaining time with a note is

shown.

General indicators — To show standby indicators, such as date, cell info display, info messages, PTT default

group name, and closed user group index. The date is shown if the calendar is not selected as active standby

content.

Standby mode shortcuts

To access the list of dialed numbers, press the call key once. See Make a call p. 29.

To call your voice mailbox (network service) when you have saved your voice mailbox number in the phone,

press and hold 1.

To connect to a browser service, press and hold 0.

To set shortcut functions for the navigation key, see Navigation key in My shortcuts p. 67.

To make a call by pressing a number key with an assigned phone number, see Speed dialing p. 29.

To toggle between the General profile and the Silent profile, press and hold #.

Power saving screen saver

To save power, a digital clock screen saver overwrites the display when no function of the phone has been used

for a certain period of time. See Power saver in Main display p. 65 or Power saver in Mini display p. 66 for

information on activating the power screen saver.

■Indicators and icons

Your phone has two types of identifiers: indicators and icons.

Indicators

See Standby mode p. 24 for information on indicators.

Icons

Icons are graphical representations of a specific item or situation. The following list describes each icon.

You have unread messages in the Inbox folder.

You have unsent, canceled, or failed messages in the Outbox folder.

The phone registered a missed call.

You have received one or several instant messages, and you are connected to the instant messaging

service.

The keypad is locked.

The alarm clock is set to On.

The phone does not ring for an incoming call or text message.

The countdown timer is running.

The stopwatch is running in the background.

/The phone is registered to the GPRS or EGPRS network.

/A GPRS or EGPRS connection is established.

/The GPRS or EGPRS connection is suspended (on hold), for example, if there is an incoming or outgoing

call during an EGPRS or GPRS dial-up connection.

When the infrared connection is activated, the indicator is shown continuously.

A Bluetooth connection is active.

If you have two phone lines, the second phone line is selected.

All incoming calls are diverted to another number.

The loudspeaker is activated, or the music stand is connected to the phone.

Calls are limited to a closed user group.

The timed profile is selected.

■Keypad lock (keyguard)

The keyguard disables your keypad to prevent accidental key presses.

• To lock the keypad, select Menu, and press * within

3.5 seconds.

• To unlock the keypad, select Unlock, and press * within 1.5 seconds.

If the Security keyguard is set to On, enter the security code if requested.

To answer a call when the keyguard is on, press the call key. When you end or reject the call, the keypad is

automatically locked.

When the keyguard is on, calls still may be possible to the official emergency number programmed into your

device. Enter the emergency number and press the call key.

For information about Security keyguard, see Phone p. 75.

4. Call functions

■Make a call

1. Enter the phone number, including the area code. To delete an incorrect character, select Clear.

For international calls, press * twice for the international prefix (the + character replaces the international

access code); and then enter the country code, the area code without the leading 0, if necessary, and the

phone number.

2. To call the number, press the call key.

3. To end the call or to cancel the call attempt, press the end key, or select Options > End call.

■Speed dialing

Assign a phone number to one of the speed dialing keys, 2 to 9. Call the number by one of the following ways:

• Press a speed dialing key, and then press the call key.

•If Speed dialling is set to On, press and hold a speed dialing key until the call is started. See Speed dialling in

Call p. 74.

■Enhanced voice dialing

You can make a phone call by saying the name that is saved in the contact list of the phone. A voice command

is added automatically to all entries in the contact list of the phone.

Make a voice dialing call

If an application is sending or receiving data using a packet data connection, end the application before you

use voice dialing.

Voice commands are language-dependent. To set the language, see Voice playback language in Phone p. 75.

Note: Using voice tags may be difficult in a noisy environment or during an emergency, so you should not rely

solely upon voice dialing in all circumstances.

1. In the standby mode, press and hold the right selection key. A short tone is played, and Speak now is

displayed.

If you are using a compatible headset with the headset key, press and hold the headset key to start the voice

dialing.

2. Say the voice command clearly. If the voice recognition is successful, a list with matches is shown. The

phone plays the voice command of the match on the top of the list. After about 1.5 seconds, the phone dials

the number; or if the result is not the correct one, scroll to another entry, and select to dial the entry.

Using voice commands to carry out a selected phone function is similar to voice dialing. See Voice

commands in My shortcuts p. 67.

■Answer or reject a call

• Open the fold, or press the call key to answer the call. To mute the ringing tone, select Silence, if the fold is

open or if the fold is closed, press the volume up/down key.

• To reject an incoming call when the fold is open, press the end key.

If Divert if busy is activated in your voice mailbox, the call is forwarded to your voice mail. If not, the call is

rejected. If a compatible headset supplied with the headset key is connected to the phone, press the headset

key to answer and end a call.

Call waiting

Call waiting is a network service. To answer the waiting call during an active call, press the call key. The first

call is put on hold. To end the active call, press the end key.

To activate the Call waiting function, see Call p. 74.

■Options during a call

Many of the options that you can use during a call are network services. For availability, contact your service

provider.

To increase or decrease the volume during a call, press the volume up or down key on the side of the phone.

Select Options during a call and the following options may be available.

DTMF tones— to send tone strings

Swap — to switch between the active call and the call on hold

Transfer calls — to connect a call on hold to an active call and disconnect yourself

Conference — to make a conference call that allows up to five persons to take part in a conference call

Private call — to discuss privately in a conference call

Do not hold the device near your ear when the loudspeaker is in use, because the volume may be extremely

loud.

5. Phone menus

Phone features are grouped according to function and are accessed through the main menus of your phone.

Each main menu contains submenus and lists from which you can select or view items and personalize phone

features. Scroll to access these menus and submenus.

Some menus may not be available, depending on your network. For more information, contact your service

provider.

■Menu views

Your phone may have two types of menu views: List and Grid.

In the List interface, images introduce every menu. Scroll to navigate through the menus. As you scroll through

the menus, the menu number appears in the upper right corner of the display. Below the menu number is a

scroll bar with a tab. The tab moves up or down as you scroll through the menus, providing a visual

representation of your current position in the menu structure.

In the Grid interface, multiple menu icons appear on a single display. Use the four-way navigation key to scroll

through the icons. The name of the menu appears at the top of the display and the icon for the selected menu is

outlined.

To change the menu view, select Options > Main menu view > List or Grid.

■Access a menu function

1. Select Menu and the menu you want.

2. If the menu contains submenus, select the one that you want.

3. If the selected menu contains further submenus, select the one that you want

4. To return to the previous menu level, select Back. To exit the menu, select Exit.

6. Messaging

You can use mobile messages to keep in touch with friends, family, and business associates by

using the short message service (SMS), which is a network service. Not all messaging features are available in

all wireless networks. Contact your service provider for availability and subscription information.

When sending messages, your phone may display the words Message sent. This is an indication that the

message has been sent by your device to the message center number programmed into your device. This is not

an indication that the message has been received at the intended destination. For more details about

messaging services, check with your service provider.

■Text messages

Your device supports the sending of text messages beyond the character limit for a single message. Longer

messages are sent as a series of two or more messages. Your service provider may charge accordingly. A

message length indicator appears at the top of the phone display. This indicator allows you to see how many

characters are left in the message as you are entering text because it counts backwards from 913.

Characters that use accents or other marks, and characters from some language options like Chinese, take up

more space limiting the number of characters that can be sent in a single message.

You can use predefined templates to help you write text messages. Before you can send any text or e-mail

message, you need to save some message settings. See Message settings p. 51.

To check SMS e-mail service availability and to subscribe to the service, contact your service provider.

Text entry

To enter text while writing messages, use traditional or predictive text input. When using traditional text input,

press a number key, 1 to 9, repeatedly until the character you want is displayed. In predictive text input you

can enter a letter with a single key press.

When you write text, appears at the top left of the display, indicating predictive text input, and is

displayed, indicating traditional text input. , , or is displayed next to the text input indicator,

indicating the character case. To change the character case, press #. indicates number mode. To change

from the letter to number mode, press and hold #, and select Number mode.

Settings

To set the writing language to a language other than that selected, select Options > Writing language.

Predictive text input is only available for the languages on the list.

To set the predictive text input option, select Options > Prediction on , or to set traditional text input option,

select Options > Prediction off.

To quickly set predictive text input on or off when writing text, press # twice, or select and hold Options.

Predictive text input

Predictive text input allows you to write text quickly by using the phone keypad and a built-in dictionary.

1. Start writing a word, using the keys, 2 to 9, and press each key only once for one letter. The word changes

after each keystroke.

2. When you finish writing the word and it is correct, press 0.

3. If a displayed word is not correct, press * repeatedly, or select Options > Matches. When the word that you

want is displayed, select Use.

4. If the ? character is displayed after the word, the word you intended to write is not in the dictionary. To add

the word to the dictionary, select Spell. The phone displays the entered letters. Enter the word (traditional

text input is used), and select Save.

Traditional text input

Press a number key, 1 to 9, repeatedly until the character you want is displayed. Not all characters available

under a number key are printed on the key. The characters available depend on the selected writing language.

See Settings p. 34.

If the next letter you want is located on the same key as the present one, wait until the cursor is displayed, or

press any of the navigation keys, and enter the letter.

To access the most common punctuation marks and special characters, press 1. To insert a space, press 0.

If you want more characters, press *.

Write and send

1. Select Menu > Messaging > Create message > Text message and enter the recipient’s phone number in the

To: field.

2. To retrieve a phone number from Contacts, select Add > Contact. To send the message to multiple

recipients, add the contacts you want one by one.

3. To send the message to persons in a group, select Contact group and the group you want. To retrieve the

contacts to which you recently sent messages, select Add > Recently used.

4. Scroll down and enter a message. See Text entry p. 33.

5. To insert a template to the text message, select Options > Use template and the template you want to

insert.

6. To see how the message will look to the recipient, select Options > Preview.

7. To send the message, select Send.

Read and reply

When you receive messages, either 1 message received or N messages received is displayed, where N is the

number of new messages.

1. To view a new message, select Show. To view it later, select Exit.

To read the message later, select Menu > Messaging > Inbox. If more than one message has been received,

select the message that you want to read. indicates an unread message in Inbox.

2. While reading a message, select Options, and delete or forward the message, edit the message as a text

message or an SMS e-mail or move it to another folder, or view or extract message details. You can also

copy text from the beginning of the message to your phone calendar as a reminder note.

3. To reply to a message, select Reply > Text message, Multimedia, Postcard, Flash message, or Audio message.

To send a text message to an e-mail address, enter the e-mail address in the To: field.

4. Scroll down and enter a message in the Message: field. See Text entry p. 33. If you want to change the

message type for your reply message, select Options > Change msg. type.

5. To send the message, select Send.

■SIM messages

SIM messages are text messages that are saved to your SIM card. You can copy or move those messages to the

phone memory, but not vice versa. Received messages are saved to the phone memory.

To read SIM messages, select Menu > Messaging > Options > SIM messages.

■Multimedia messages

Note: Only devices that have compatible multimedia message or e-mail features can receive and display multimedia

messages. The appearance of a message may vary depending on the receiving device.

A multimedia message can contain text, sound, a picture, a calendar note, a business card, or a video clip. If the

message is too large, the phone may not be able to receive it. Some networks allow text messages that include

an Internet address where you can view the multimedia message.

Multimedia messaging (network service) supports the following formats:

• Picture: JPEG, GIF, animated GIF, and WBMP

• Sound: AMR and 13K audio

• Video clips: 3GPP and 3GPP2 formats or MPEG video and AMR audio or 13K audio.

The phone may not support all variations of the file formats.

You cannot receive multimedia messages during a call, a game, another Java application, or an active browsing

session over GSM data. Because delivery of multimedia messages can fail for various reasons, do not rely solely

upon them for essential communications.

Write and send

The wireless network may limit the size of multimedia messages. If the inserted picture exceeds this limit, the device may

make it smaller so that it can be sent by MMS.

To set the settings for multimedia messaging, see Multimedia p. 52. To check availability and to subscribe to

the multimedia messaging service, contact your service provider.

1. Select Menu > Messaging > Create message > Multimedia.

2. Enter a message. See Text entry p. 33.

Your phone supports multimedia messages that contain several pages (slides). A message can contain a

calendar note and a business card as attachments. A slide can contain text, one image, and one sound clip;

or text and a video clip.

3. To insert a slide in the message, select New; or select Options > Insert > Slide.

4. To view the message before sending it, select Options > Preview.

5. Scroll down and select Send. See Message sending p. 38.

6. Enter the recipient’s phone number in the To: field.

To retrieve a phone number from Contacts, select Add > Contact.

To send the message to multiple recipients, add the contacts you want one by one.

To send the message to persons in a group, select Contact group and the group you want.

To retrieve the contacts to which you recently sent messages, select Add > Recently used.

Message sending

When you finish writing your message, to send the message, select Send, or press the call key. The phone saves

the message in the Outbox folder, and sending starts. If you select Save sent messages > Yes, the sent message

is saved in the Sent items folder. See General settings p. 51.

Note: When the phone is sending the message, the animated is shown. Actual receipt of a message depends on

a number of factors. For more details about messaging services, check with your service provider.

It takes more time to send a multimedia message than to send a text message. While the message is being sent,

you can use other functions on the phone. If an interruption occurs while the message is being sent, the phone

tries to resend the message a few times. If these attempts fail, the message remains in the Outbox folder. You

can try to resend it later.

To cancel the sending of the messages in the Outbox folder, scroll to the desired message, and select Options >

Cancel sending.

Read and reply

Important: Exercise caution when opening messages. Multimedia message objects may contain malicious

software or otherwise be harmful to your device or PC.

When you receive multimedia messages, either Multimedia message received or N messages received is

displayed, where N is the number of new messages.

1. To read the message, select Show. To view it later, select Exit.

To read the message later, select Menu > Messaging > Inbox. In the list of messages, indicates an

unread message. Select the message that you want to view.

2. To view the whole message if the received message contains a presentation, select Play.

To view the files in the presentation or the attachments, select Options > Objects or Attachments.

3. To reply to the message, select Options > Reply > Text message, Multimedia, Postcard, Flash message, or

Audio message. Write the reply message.

If you want to change the message type for your reply message, select Options > Change msg. type. The

new message type may not support all the content that you have added.

4. To send the message, select Send. See Message sending p. 38.

Memory full

When you are receiving a message, and the memory for the messages is full, Memory full. Unable to receive

msgs. is shown. To delete old messages, select OK > Yes and the folder. Scroll to the message you want, and

select Delete.

If you want to delete more than one message at the same time, scroll to one of the messages you want to

delete and select Options > Mark. Scroll to each additional message you want to delete and select Mark or if

you want to delete all the messages, select Options > Mark all. When you have finished marking the messages

you want to delete, select Options > Delete marked.

Folders

The phone saves received text and multimedia messages in the Inbox folder.

To set the phone to save the sent messages in the Sent items folder, see Save sent messages in General settings

p. 51.

To see any message you want to send later and have saved as a draft in the Drafts folder, select Menu >

Messaging > Drafts.

You can move your messages to the Saved items folder. To organize your Saved items subfolders, select

Menu > Messaging > Saved items > Saved messages or a folder you added. To add a new folder for your

messages, select Options > Add folder. To delete or rename a folder, scroll to the folder you want, and select

Options > Delete folder or Rename folder.

Your phone has templates. To create a new template, save or copy a message as a template. To access the

template list, select Menu > Messaging > Saved items > Templates.

Postcard messages

Sending postcard messages is a network service. If your service provider supports this feature, you can create

and send multimedia messages to a postcard service. The message is then printed as a postcard to be delivered

to a postal recipient. For information on the availability of postcard messages, contact your service provider.

To send a postcard message, do the following:

1. Select Menu > Messaging > Create message > Postcard and enter the recipient’s name in the Recipient:

field.

2. To retrieve a recipient’s name from Contacts, select Search. You cannot retrieve a recipient’s name from

your list of contacts, unless the recipient’s postal address details have been entered in Contacts.

3. If you have retrieved the recipient’s name from Contacts, the postal address details are inserted into the

appropriate postal address fields. If you manually enter the recipient’s name, you must enter the

appropriate information into the postal address fields.

4. To insert an image to the postcard, scroll down to the Image: field and select Insert > Open Images, New

image, or Open Gallery and the image you want; then select Insert.

5. Scroll down to the Greeting text: field and enter the text you want for your greeting. The maximum length

of the greeting text is 200 characters.

6. To see how the message will look to the recipient, select Options > Preview.

7. To send the message, select Send.

Flash messages

Flash messages are text messages that are instantly displayed upon reception. Flash messages are not

automatically saved.

Write a flash message

Select Menu > Messaging > Create message > Flash message. Enter the recipient’s phone number in the To:

field. Write your message in the Message: field. The maximum length of a flash message is 70 characters. To

send the message, select Send.

Receive a flash message

A received flash message is indicated with Message:, followed by a few words from the beginning of the

message. To read the message, select Read. To extract phone numbers, e-mail addresses, and Web site

addresses from the current message, select Options > Use detail.

■Nokia Xpress audio messaging

You can use the multimedia message service to create and send voice messages conveniently. Multimedia

messaging service must be activated before you can use audio messages.

Create an audio message

1. Select Menu > Messaging > Create message > Audio message, and to start recording.

2. To stop recording, select and a message screen is displayed.

3. To view the available options, select Options.

4. Enter the recipient’s phone number in the To: field.

To retrieve a phone number from Contacts, select Add > Contact.

To send the message to multiple recipients, add the contacts you want one at a time.

To send the message to persons in a group, select Contact group and the group you want.

To retrieve the contacts to which you recently sent messages, select Add > Recently used.

5. To send the message, select Send.

Receive an audio message

When your phone receives audio messages, either 1 audio message received, or N messages received is

displayed, where N is the number of new messages. To open the message, select Play; or if more than one

message is received, select Show > Play. To listen to the message later, select Exit. Select Options to see the

available options.

■Instant messaging

You can take text messaging to the next level by experiencing instant messaging (IM) (network service) in a

wireless environment. You can engage in instant messaging with friends and family, regardless of the mobile

system or platform (like the Internet) they are using, as long as you all use the same instant messaging service.

Before you can start using instant messaging, you must first subscribe to your wireless service provider’s text

messaging service and register with the instant messaging service you want to use. You must also obtain a user

name and password before you can use instant messaging. See Register with an instant messaging service

p. 43 for more information.

Note: Depending on both your IM service provider and your wireless service provider, you may not have

access to all of the features described in this guide.

To set the required settings for the instant messaging service, see Connect. settings in Access p. 43. The icons

and texts on the display may vary, depending on the instant messaging service.

While you are connected to the instant messaging service, you can use the other functions of the phone, and

the instant messaging conversation remains active in the background. Depending on the network, the active

instant messaging conversation may consume the phone battery faster, and you may need to connect the

phone to a charger.

You can do this by registering over the Internet with the IM service provider you have selected to use. During

the registration process, you will have the opportunity to create the user name and password of your choice.

For more information about signing up for instant messaging services, contact your wireless service provider.

Access

To access the Instant messages menu while still offline, select Menu > Messaging > Instant messages (Instant

messages may be replaced by another term depending on the service provider). If more than one set of

connection settings for instant messaging service is available, select the one you want. If there is only one set

defined, it is selected automatically.

The following options are shown:

messaging service when you switch on the phone; in the login session, scroll to Automatic login: and select

Change >On, or select Menu > Messaging > Instant messages, connect to the instant messaging service, and

select Options > Settings > Automatic login > On.

Saved convers. — to view, erase, or rename the conversations that you saved during an instant messaging

session

Connect. settings — to edit the settings needed for messaging and presence connection

Connect

To connect to the instant messaging service, access the Instant messages menu, select the instant messaging

service, if needed, and select Login. When the phone has successfully connected, Logged in is displayed.

To disconnect from the instant messaging service, select Options > Logout.

Sessions

When connected to the instant messaging service your status as seen by others is shown in a status line:

Status: Online, My status: Busy or Status: App. off. — to change own status, select Change.

Below the status line there are three folders containing your contacts and showing their status: Convers.,

Online and Offline. To expand the folder highlight it and select Expand (or press scroll right), to collapse the

folder select Collapse (or press scroll left).

Convers. — shows the list of new and read instant messages or invitations to instant messaging during the

active instant messaging session.

indicates a new group message.

indicates a read group message.

indicates a new instant message.

indicates a read instant message.

indicates an invitation.

The icons and texts on the display may vary, depending on the instant messaging service you have selected.

Online — shows the number of contacts that are online.

Offline — shows the number of contacts that are offline.

To start a conversation, expand the Online or the Offline folder and scroll to the contact with whom you would

like to chat and select Chat . To answer an invitation or to reply to a message expand the Convers. folder and

scroll to the contact to whom you would like to chat and select Open. To add contacts, see Add IM contacts

p. 46.

Groups > Public groups (not visible if groups are not supported by the network) — the list of bookmarks to

public groups provided by the service provider is displayed. To start a instant messaging session with a group,

scroll to a group, and select Join. Enter the screen name that you want to use as your nickname in the

conversation. When you have successfully joined the group conversation, you can start a group conversation.

You can create a private group. See Groups p. 46.

Search > Users or Groups — to search for other instant messaging users or public groups on the network by

phone number, screen name, e-mail address, or name. If you select Groups, you can search for a group by a

member in the group, or by group name, topic, or ID.

Options > Chat or Join group — to start the conversation when you have found the user or the group that you

want.

Accept or reject an invitation

In the standby mode, when you are connected to the instant messaging service and you receive a new

invitation, New invitation received is displayed. To read it, select Read. If more than one invitation is received,

scroll to the invitation you want, and select Open. To join the private group conversation, select Accept, and

enter the screen name you want to use as your nickname. To reject or delete the invitation, select Options >

Reject or Delete.

Read an instant message

In the standby mode, when you are connected to the instant messaging service, and you receive a new message

that is not a message associated with an active conversation, New instant message is displayed.To read it,

select Read.

If you receive more than one message, N new instant messages appears in the display, where N is the number of

new messages. Select Read, scroll to a message, and select Open.

New messages received during an active conversation are held in Instant messages > Conversations. If you

receive a message from someone who is not in IM contacts, the sender ID is displayed. To save a new contact

that is not in the phone memory, select Options > Save contact.

Participate in a conversation

To join or start an IM session, write your message; and select Send, or press the call key. Select Options to view

the available options.

If you receive a new message during a conversation from a person who is not taking part in the current

conversation, is displayed, and the phone sounds an alert tone.

group, enter your screen name as your nickname for the group. To delete a group from your group list, select

Options > Delete group.

To search for a group, select Groups > Public groups > Search groups. You can search for a group by a member

in the group, by group name, topic, or ID.

Private

Connect to the IM service, and from the main menu select Options > Create group. Enter the name for the

group and the screen name that you want to use as your nickname. Mark the private group members in the

contacts list, and write an invitation.

■E-mail application

Important: Exercise caution when opening messages. E-mail messages may contain malicious software or

otherwise be harmful to your device or PC.

The e-mail application uses EGPRS or GPRS (network service) to allow you to access your e-mail account from

your phone when you are not in the office or at home. This e-mail application is different from the SMS e-mail

function. To use the e-mail function on your phone, you need a compatible e-mail system.

You can write, send, and read e-mail with your phone. You can also save and delete the e-mail on a compatible

PC. Your phone supports POP3 and IMAP4 e-mail servers. Before you can send and retrieve any e-mails, you

may need to do the following:

• Obtain a new e-mail account or use the current one. For availability of your e-mail account, contact your e-

mail service provider.

• Contact your e-mail service provider for the settings required for e-mail. You may receive the e-mail

configuration settings as a configuration message. See Configuration settings service p. 14. You can also

enter the settings manually. See Configuration p. 77.

To activate the e-mail settings, select Menu > Messaging > Message settings > E-mail messages. See E-

mail p. 53.

This application does not support keypad tones.

Write and send

1. Select Menu > Messaging > E-mail > Create e-mail.

2. Enter the recipient’s e-mail address, and select OK.

3. Write a subject for the e-mail, and select OK.

4. Enter the e-mail message. See Text entry p. 33.

To attach a file to the e-mail, select Options > Attach and the file you want from the Gallery.

5. To send the e-mail message immediately, select Send > Send now.

To save the e-mail in the Outbox folder to be sent later, select Send > Send later.

To edit or continue writing your e-mail later, select Options > Save draft. The e-mail is saved in Other

folders > Drafts.

To send the e-mail later, select Menu > Messaging > E-mail > Options > Send now or Retrieve and send.

Download

1. To download e-mail messages that have been sent to your e-mail account, select Menu > Messaging > E-

mail > Retrieve.

2. To download new e-mail messages and send e-mails that have been saved in the Outbox folder, select

Options > Retrieve and send.

3. To first download the headings of the new e-mail messages that have been sent to your e-mail account,

select Options > Check new e-mail.

4. To download the selected e-mails, mark the ones you want, and select Options > Retrieve.

5. Select the new message in Inbox. To view it later, select Back. indicates an unread message.

phone lets you know by beeping, displaying a message, or both. If you receive more than one message, your

phone shows the number of messages received.

To call your voice mailbox, select Menu > Messaging > Voice messages > Listen to voice messages. To enter,

search for, or edit your voice mailbox number, select Voice mailbox number.

If supported by the network, indicates new voice messages. Select Listen to call your voice mailbox

number.

■Info messages

With the Info messages network service, you can receive short text messages from your service provider. To

check availability, topics, and the relevant topic numbers, contact your service provider.

■Service commands

Use the Service commands editor to enter and send service requests (also known as USSD commands) to your

service provider. Contact your service provider for information about specific service commands.Select Menu >

Messaging > Service commands.

■Delete messages

To delete messages one by one, select Menu > Messaging > Delete messages > By message and the folder from

which you want to delete messages. Scroll to the message you want to delete, and select Delete.

If you want to delete more than one message at the same time, scroll to one of the messages you want to

delete and select Options > Mark. Scroll to each additional message you want to delete and select Mark or if

you want to delete all the messages, select Options > Mark all. When you have finished marking the messages

you want to delete, select Options > Delete marked.

To delete all messages from a folder, select Menu > Messaging > Delete messages > By folder and the folder

from which you want to delete the messages. Depending on the folder, the phone asks if you want to delete the

E-mail message centers > Add center — to set the phone numbers and name of the e-mail center for sending

SMS e-mails. If you select SIM e-mail cntr., you can view the SIM e-mail center information.

E-mail center in use — to select the SMS e-mail message center in use

Message validity — to select the length of time for which the network attempts to deliver your message

Messages sent via > Text > Page, or Fax— to select the format of the messages to be sent (network service).

Use packet data > Yes — to set GPRS as the preferred SMS bearer

Character support > Full — to select all characters in the messages to be sent as viewed. If you select Reduced,

characters with accents and other marks may be converted to other characters. When writing a message, you

can check how the message will look to the recipient by previewing the message. See Write and send p. 35.

Reply via same center > Yes — to allow the recipient of your message to send you a reply using your message

center (network service)

Multimedia

The multimedia message settings affect the sending, receiving, and viewing of multimedia messages.

You may receive the configuration settings for multimedia messaging as a configuration message. See

Configuration settings service p. 14. You can also enter the settings manually. See Configuration p. 77.

Select Menu > Messaging > Message settings > Multimedia msgs. and one of the following options:

Delivery reports > On — to ask the network to send delivery reports about your messages (network service)

Image size (multimedia) — to define the default image size used in multimedia messages

Default slide timing — to define the default time between slides in multimedia messages

Allow multimedia reception > Yes or No — to receive or block the multimedia message. If you select In home

network, you cannot receive multimedia messages when outside your home network. The default setting of the

multimedia message service is generally In home network.

Incoming multimedia messages — to allow the reception of multimedia messages automatically, manually

after being prompted, or to reject the reception. This setting is not shown if Allow multimedia reception is set

to No.

Allow advertisements — to receive or reject advertisements. This setting is not shown if Allow multimedia

reception is set to No, or Incoming multi- media messages is set to Reject.

Configuration settings > Configuration — only the configurations that support multimedia messaging are

shown. Select a service provider, Default, or Personal config. for multimedia messaging. Select Account and a

multimedia messaging service account contained in the active configuration settings.

E-mail

The e-mail settings affect the sending, receiving, and viewing of e-mail.

You may receive the configuration settings for the e-mail application as a configuration message. See

Configuration settings service p. 14. You can also enter the settings manually. See Configuration p. 77.

To activate the settings for the e-mail application, select Menu > Messaging > Message settings > E-mail

messages and one of the following options:

Configuration — Select the set that you want to activate.

Account — Select an account provided by the service provider.

My name — Enter your name or nickname.

E-mail address — Enter your e-mail address.

Include signature — You can define a signature that is automatically added to the end of your e-mail when you

write your message.

Reply-to address — Enter the e-mail address to which you want the replies to be sent.

SMTP user name — Enter the name that you want to use for outgoing mail.

SMTP password — Enter the password that you want to use for outgoing mail.

Display terminal window — Select Yes to perform manual user authentication for intranet connections.

Incoming server type — Select POP3 or IMAP4, depending on the type of

e-mail system that you are using. If both types are supported, select IMAP4.

Incoming mail settings — Select available options for POP3 or IMAP4.

7. Contacts

In Contacts, you can store and manage contact information, such as names, phone numbers, and

addresses. You can save names and numbers in the internal memory of the phone, the SIM card memory, or in a

combination of the two. Names and numbers saved in the SIM card memory, are indicated by .

■Search

Select Menu > Contacts > Names and scroll through the list of contacts or enter the first letter of the name

you are trying to find.

■Save names and phone numbers

Names and numbers are saved in the used memory. Select Menu > Contacts > Names > Options > Add new

contact and enter the last name, first name, and the phone number.

■Save numbers, items, or an image

In the phone memory for contacts, you can save different types of phone numbers and short text items per

name. You can also assign a ringing tone or video clip to a contact. When you receive an incoming call from a

contact to whom you have assigned a video clip, the video clip is played on the mini display on the front of the

phone.

The first number you save is automatically set as the default number, and it is indicated with a frame around

the number type indicator (for example, ). When you select a name, the default number is used unless you

select another number.

1. Make sure that the memory in use is either Phone or Phone and SIM.

2. Scroll to the name to which you want to add a new number or text item, and select Details > Options > Add

detail.

3. To add a number, select Number and one of the number types.

4. To add another detail, select a text type, an image from the Gallery, or a new image.

5. To search for an ID from the server of your service provider (if you have connected to the presence service),

select User ID > Search. See My presence p. 57. If only one ID is found, it is automatically saved. Otherwise,

to save the ID, select Options > Save. To enter the ID, select Enter ID manually, enter the ID, and select OK.

6. To change the number type, scroll to the number you want, and select Options > Change type. To set the

selected number as the default number, select Set as default.

7. Enter the number or text item; to save it, select Save.

8. To return to standby mode, select Back > Exit.

■Copy a contact

Search for the contact you want to copy, and select Options > Copy contact. You can copy names and phone

numbers from the phone contact memory to the SIM card memory, or vice versa. The SIM card memory can

save names with one phone number attached to them.

■Edit contact details

1. Search for the contact you want to edit, select Details; and scroll to the name, number, text item, or image

you want.

2. To edit a name, number, or text item, or to change image, select Options > Edit name, Edit number, Edit

detail, or Change image.

You cannot edit an ID when it is on the IM contacts or the Subscribed names list.

■Delete contacts or details

To delete all the contacts and the details attached to them from the phone or SIM card memory, select Menu >

Contacts > Delete all contacts > From phone mem. or From SIM card. Confirm with the security code.

To delete a contact, search for the contact you want, and select Options > Delete contact.

To delete a number, text item, or an image attached to the contact, search for the contact, and select Details.

Scroll to the desired detail, and select Options > Delete > Delete number, Delete detail, or Delete image.

Deleting an image from contacts does not delete it from the Gallery.

■Business cards

You can send and receive a person’s contact information from a compatible device that supports the vCard

standard as a business card.

To send a business card, search for the contact whose information you want to send, and select Details >

Options > Send bus. card > Via multimedia, Via text message, Via infrared or Via Bluetooth.

When you have received a business card, select Show > Save to save the business card in the phone memory.

To discard the business card, select Exit > Yes.

■My presence

With the presence service (network service), you can share your presence status with other users with

compatible devices and access to the service. Presence status includes your availability, status message, and

personal logo. Other users who have access to the service and who request your information are able to see

your status. The requested information is shown in Subscribed names in the viewers’ Contacts menu. You can

personalize the information that you want to share with others and control who can see your status.

Before you can use presence, you must subscribe to the service. To check the availability and costs, and to

subscribe to the service, contact your service provider, from whom you also receive your unique ID, password,

and the settings for the service. See Configuration p. 77.

While you are connected to the presence service, you can use the other functions of the phone, and the

presence service is active in the background. If you disconnect from the service, your presence status is shown

for a certain amount of time to viewers depending on the service provider.

Select Menu > Contacts > My presence and from the following options:

Connect to 'My presence' or Disconnect from service to connect to or disconnect from the service.

View my presence > Private pres. or Public presence — to view your presence status

Edit my presence > My availability, My presence message, My presence logo, or Show to — to change your

presence status

My viewers > Current viewers, Private list, or Blocked list — to view the persons who are subscribed to or

blocked from your presence information

Settings > Show current pres. in standby, Connection type, or IM and my presence settings

■Subscribed names

You can create a list of contacts for whom you want presence status information available. You can view the

information, if it is allowed by the contacts and the network. To view these subscribed names, scroll through

the contacts, or use the Subscribed names menu.

Ensure that the memory in use is Phone or Phone and SIM.

To connect to the Presence service, select Menu > Contacts > My presence > Connect to 'My presence' service.

Add contacts

1. Select Menu > Contacts > Subscribed names.

2. If you have no contacts in your list, select Add. Otherwise, select Options > Subscribe new. The list of your

contacts is shown.

3. Select a contact from the list and if the contact has a user ID saved, the contact is added to the subscribed

names list.

4. To subscribe to a contact from the Contacts list, search for the contact you want, and select Details >

Options > Request presence > As subscription.

If you only want to view the presence information but not subscribe to a contact, select Request presence >

One time only.

View

To view the presence information, see Search p. 55.

1. Select Menu > Contacts > Subscribed names.

The status information of the first contact in the subscribed names list is displayed. The information that

the person wants to give to the others may include text and some of the following icons:

, , or indicate that the person is either available, discreet, or not available.

indicates that the person’s presence information is not available.

2. Select Options > View details to view the details of the selected contact; or select Options > Subscribe

new, Send message, Send bus. card, or Unsubscribe.

Unsubcribe

To unsubscribe a contact from the Contacts list, select the contact and Options > Unsubscribe > OK.

To unsubscribe from the Subscribed names menu, see View p. 59.

■Settings

Select Menu > Contacts > Settings and one of the following options:

Memory in use — to select the SIM card or phone memory for your contacts. Select Phone and SIM to recall

names and number from both memories. In that case, when you save names and numbers, they are saved in the

phone memory.

Contacts view — to select how the names and numbers in Contacts are displayed

Name display — to select whether the contact’s first or last name is displayed first

Font size — to set the font size for the list of contacts

Memory status — to view the free and used memory capacity

■Groups

Select Menu > Contacts > Groups to arrange the names and phone numbers saved in the memory into caller

groups with a different ringing tone and a group image.

■Speed dialing

To assign a number to a speed dialing key, select Menu > Contacts > Speed dialling, and scroll to the speed

dialing number that you want.

Select Assign, or if a number has already been assigned to the key, select Options > Change. Select Search and

the contact you want to assign. If the Speed dialling function is off, the phone asks whether you want to

activate it.

To make a call using speed dialing, see Speed dialing p. 29.

■Service and my numbers

Select Menu > Contacts and one of the following options:

Service numbers — to call the service numbers of your service provider if the numbers are included on your SIM

card (network service)

My numbers — to view the phone numbers assigned to your SIM card. This is only shown if the numbers are

included on your SIM card.

8. Call log

The phone registers the phone numbers of identified missed, received, and dialed calls, and the

approximate length of your calls. The phone registers missed and received calls only if the network supports

these functions, and the phone is turned on and within the network’s service area.

To view the information on your calls, select Menu > Log > Missed calls, Received calls, or Dialled numbers. To

view your recent missed and received calls and the dialed numbers chronologically, select Call log. To view the

contacts to whom you most recently sent messages, select Message recipients.

To view the approximate information on your recent communications, select Menu > Log > Call timers, Packet

data counter, or Packet data conn. timer.

To view how many text and multimedia messages you have sent and received, select Menu > Log > Message

log.

Note: The actual invoice for calls and services from your service provider may vary, depending upon network

features, rounding off for billing, taxes, and so forth.

Some timers may be reset during service or software upgrades.

■Positioning information

The network may send you a location request. You can ensure that the network will deliver location

information of your phone only if you approve it (network service). Contact your service provider to subscribe

and to agree upon the delivery of location information. Some networks allow you to request the position of the

phone (network service).

To accept or reject the location request, select Accept or Reject. If you miss the request, the phone

automatically accepts or rejects it according to what you have agreed with your service provider. The phone

displays 1 missed position request. To view the missed location request, select Show.

To view the information on the 10 most recent privacy notifications and requests or to delete them, select

Menu > Log > Positioning > Position log > Open folder or Delete all.

9. Settings

Use this menu to set or change your profiles, themes, personal shortcuts, time and date settings,

call settings, phone settings, main display settings, mini display settings, tone settings, enhancement settings,

configuration settings, security settings, and to restore factory settings.

■Profiles

Your phone has various setting groups, called profiles, for which you can personalize the phone tones for

different events and environments.

Select Menu > Settings > Profiles and a profile.

• To activate the selected profile, select Activate.

• To personalize the profile, select Personalise, and select the setting you want to change: then, make the

changes.

• To set the profile to be active until a certain time (up to 24 hours), select Timed and set the time you want

the profile setting to end. When the time set for the profile expires, the previous profile (that was not timed)

becomes active.

■Themes

You can change the look of your phone display by activating a theme. A theme can include a wallpaper image,

a ringing tone, a screen saver, and a color scheme. Themes are stored in the Gallery.

Select Menu > Settings > Themes and one of the following options:

Select theme — to set a theme in your phone. A list of folders in the Gallery opens. Open the Themes folder, and

select a theme.

Theme downloads — to open a list of links to download more themes. See Download settings p. 107.

■Tones

You can change the settings of the selected active profile.

Select Menu > Settings > Tones. and edit the available settings. You can find the same settings when you

personalize a profile in the Profiles menu. See Profiles p. 63.

To set the phone to ring only upon calls from phone numbers that belong to a selected caller group, select Alert

for:. Scroll to the caller group you want or All calls, and select Mark.

■Display

With display settings, you can personalize your display view of the phone.

Main display

You can select display settings for the start screen (main display).

Standby mode settings

Select Menu > Settings > Main display > Standby mode settings and one of the following options:

Active standby > My active standby — to display the active standby. Select Options and one of the following

options:

•Personalise — to change the content.

•Organise — to reorganize the content on the display.

•Enabling standby — to change the key for accessing the navigation mode. The same setting is also in the My

shortcuts menu. See Enabling active standby p. 68.

Wallpaper — to display a background picture (wallpaper) on the start screen. Select Wallpapers > Image or

Slide set and an image or a slide from the Gallery or Open Camera. To download more graphics, select Graphic

downloads.

Web — to select the font size you want to display for mobile Internet pages. Select either Extra small font,

Small font or Large font.

Mini display

You can select display settings for the mini display on the front of your phone.

Wallpaper

Select Menu > Settings > Mini display > Wallpaper > Wallpapers > Image or Slide set and an image or a slide

from the Gallery or Open Camera to take a photo. To download more graphics, select Graphic downloads.

Screen saver

Select Menu > Settings > Mini display > Screen saver >Screen savers > Image, Slide set, Video clip, Analog

clock, Digital clock or Open Camera. To download more screen savers, select Graphic downloads. To enter the

time after which the screen saver is activated, select Time-out. To activate the screen saver, select On.

Power saver

To save some battery power, select Menu > Settings > Mini display > Power saver > On. A digital clock is

displayed when no function of the phone is used after a certain period of time.

Fold animation

To select whether an animation is shown when opening and closing the fold, select Menu > Settings > Mini

display > Fold animation > On.

The fold animation is only visible if it is supported by and selected from the active theme set in your phone. See

Themes on p. 63.

■Time and date

Select Menu > Settings > Time and date and one of the following options:

Clock — to set the phone to show or hide the clock in the standby mode, adjust the clock, and select the time

zone and the time format.

Date — to set the phone to show or hide the date in the standby mode, set the date, and select the date format

and date separator.

Auto-update of date & time (network service) — to set the phone to automatically update the time and date to

the appropriate time zone.

■My shortcuts

You can set your most frequently used functions to be quickly accessed through the My shortcuts feature.

Left selection key

To select a function from the list for the left selection key, select Menu > Settings > My shortcuts > Left

selection key. See also Standby mode p. 24.

To activate a function in the standby mode if the left selection key is Go to, select Go to and the function you

want on your personal shortcut list.

Select Options and from the following options:

Select options — to add a function to the shortcut list, or to remove one. Scroll to the function, and select Mark

or Unmark.

Organise — to rearrange the functions on your personal shortcut list. Scroll to the function you want to move,

and select Move. Scroll to where you want to move the function, and select OK. Repeat this process, if you

want to move another function. When you have completed rearranging the functions you want, select Done >

Yes.

Right selection key

To set a specific function (from a predefined list) to the right selection key, select Menu > Settings > My

shortcuts > Right selection key. This function can be used only if it is supported by your service provider.

Navigation key

This key allows you to scroll up, down, left, and right. To assign other phone functions (from a predefined list) to

the navigation key, select Menu > Settings > My shortcuts > Navigation key. Scroll to the key you want, select

Change and a function from the list. To remove a shortcut function from the key, select (empty). To reassign a

function for the key, select Assign.

Enabling active standby

This function allows you to select how the active standby mode is activated. Select Menu > Settings > My

shortcuts > Enabling standby > Navigation key up, Navigat. key down, or Nav. key up/down.

Voice commands

You can call contacts and carry out phone functions by saying voice commands. Voice commands are

language-dependent. To set the language, see Voice playback language in Phone p. 75.

To select the phone functions to activate with a voice command, select Menu > Settings > My shortcuts >

Voice commands and a folder. Scroll to a function you want. indicates that the voice tag is activated. To

deactivate the voice command, select Options > Remove. To activate the voice tag, select Add. To play the

activated voice command, select Playback. To use voice commands, see Enhanced voice dialing p. 29.

To manage the voice commands, scroll to a phone function, and select from the following options:

Edit or Remove — to change or deactivate the voice command of the selected function

Remove all — to deactivate voice commands to all functions in the voice commands list.

■Connectivity

You can connect the phone to compatible devices, using an infrared, Bluetooth wireless technology, or USB

data cable (CA-53) connection. You can also define the settings for EGPRS or GPRS dial-up connections.

Bluetooth wireless technology

This device is compliant with Bluetooth Specification 2.0 supporting the following profiles: Hands-free, object push profile,

file transfer profile, dial-up networking profile, SIM access profile, serial port profile, and human interface device profile. To

ensure interoperability between other devices supporting Bluetooth technology, use Nokia approved enhancements for this

model. Check with the manufacturers of other devices to determine their compatibility with this device.

There may be restrictions on using Bluetooth technology in some locations. Check with your local authorities or service

provider.

Features that use Bluetooth technology, or allow such features to run in the background while using other features, increase

the demand on battery power and reduce the battery life.

Bluetooth technology allows you to connect the phone to a compatible Bluetooth device within 10 meters (33

feet). Since devices using Bluetooth technology communicate using radio waves, your phone and the other

devices do not need to be in direct line of sight, although the connection can be subject to interference from

obstructions, such as walls or from other electronic devices.

To set up a Bluetooth connection, do the following:

1. Select Menu > Settings > Connectivity > Bluetooth.

2. To activate or deactivate the Bluetooth function, select Bluetooth > On or Off. indicates an active

Bluetooth connection.

3. To search for compatible Bluetooth audio devices, select Search for audio enhancements Select the device

that you want to connect to the phone.

To search for any Bluetooth device in range, select Paired devices. Select New to list any Bluetooth device in

range. Scroll to a device, and select Pair.

4. Enter the Bluetooth passcode of the device to associate (pair) the device to your phone. You must only give

this passcode when you connect to the device for the first time. Your phone connects to the device, and you

can start data transfer.

Settings

To define how your phone is shown to other Bluetooth devices, select Menu > Settings > Connectivity > Bluetooth > My

phone's visibility or My phone's name.

Operating the phone in hidden mode is a safer way to avoid malicious software.

Do not accept Bluetooth connectivity from sources you do not trust.

Turn off the Bluetooth functionality as another alternative. This will not affect other functions of the phone.

Connection

Select Menu > Settings > Connectivity > Bluetooth. To check which Bluetooth connection is currently active,

select Active device. To view a list of Bluetooth devices that are currently paired with the phone, select Paired

devices.

Select Options to access available options, depending on the status of the device and the Bluetooth

connection.

Infrared

You can set up the phone to send and receive data through its infrared (IR) port. To use an IR connection, the

device with which you want to establish a connection must be IrDA compliant. You can send or receive data to

or from a compatible phone or data device (for example, a computer) through the IR port of your phone.

Do not point the IR (infrared) beam at anyone's eye or allow it to interfere with other IR devices. This device is a Class 1 laser

product.

When sending or receiving data, ensure that the IR ports of the sending and receiving devices are pointing at

each other and that there are no obstructions between the devices.

To activate the IR port of your phone, select Menu > Settings > Connectivity > Infrared.

To deactivate the IR connection, select Menu > Settings > Connectivity > Infrared. When the phone displays

Deactivate infrared?, select Yes.

If data transfer is not started within two minutes after the activation of the IR port, the connection is canceled

and must be started again.

IR connection indicator

When is shown continuously, the IR connection is activated, and your phone is ready to send or receive

data through its IR port.

When blinks, your phone is trying to connect to the other device, or a connection has been lost.

Packet data

General packet radio service (GPRS) is a network service that allows mobile phones to send and receive data

over an Internet protocol (IP) based network. GPRS is a data bearer that enables wireless access to data

networks such as the Internet.

Enhanced GPRS (EGPRS) is similar to GPRS but enables faster connections. For more information on availability

of EGPRS or GPRS and data transfer speed, contact your network operator or service provider.

The applications that may use EGPRS or GPRS are MMS, video streaming, browsing sessions, e-mail, remote

SyncML, Java application downloading, and the PC dial-up.

When you have selected GPRS as a data bearer, the phone uses EGPRS instead of GPRS, if this is available in the

network. You cannot select between EGPRS and GPRS, but for some applications you may be able to select

GPRS or GSM data (circuit switched data, CSD).

To define how to use the service, select Menu > Settings > Connectivity > Packet data > Packet data

connection and one of the following options:

When needed — to set the packet data registration and connection to established when an application using

packet data needs it and closed when you end the application.

Always online — to set the phone to automatically register to an packet data network when you switch the

phone on. or indicates that the GPRS or EGPRS service is available.

If you receive a call or a text message, or make a call during a GPRS or EGPRS connection, or indicates

that the GPRS or EGPRS connection is suspended (on hold).

Packet data settings

You can connect the phone using Bluetooth wireless technology, infrared, or USB data cable connection to a

compatible PC and use the phone as a modem to enable EGPRS or GPRS connectivity from the PC.

To define the settings for EGPRS or GPRS connections from your PC, select Menu > Settings > Connectivity >

Packet data > Packet data settings > Active access point, and activate the access point you want to use. Select

Edit active access point > Alias for access point, enter a name to change the access point settings, and select

OK. Select Packet data access point, enter the access point name (APN) to establish a connection to an EGPRS

or GPRS network, and select OK.

You can also set the EGPRS or GPRS dial-up service settings (access point name) on your PC, by using the One

Touch Access software. See Nokia PC Suite p. 112. If you have set the settings both on your PC and on your

phone, the PC settings are used.

Data transfer and synchronization

Synchronize your data from calendar, notes, and contacts with another compatible device (for example, a

mobile phone), a compatible PC, or a remote Internet server (network service).

Your phone allows data transfer with a compatible PC or another compatible device when using the phone

without a SIM card. Note that when you use the phone without a SIM card, some functions appear dimmed in

the menus and cannot be used. To synchronize with a remote Internet server is not possible without a SIM card.

To copy or synchronize data from your phone, the name of the device and the settings must be in the list of

partners in transfer contacts. If you receive data from another compatible device, the partner is automatically

added to the list, using the contact data from the other device. Server sync and PC sync settings are the original

items in the list.

To add a new partner to the list, such as a new device, select Menu > Settings > Connectivity > Data transfer >

Options > Add contact > Phone sync or Phone copy, and enter the settings according to the transfer type.

To edit the copy and synchronize settings, select a contact from the partner list, and select Options > Edit.

To delete a selected partner, select Options > Delete> OK. You cannot delete Server sync and Phone sync.

Data transfer with a compatible device

For synchronization, Bluetooth wireless technology is used. The other device is in the standby mode.

To start a data transfer, select Menu > Settings > Connectivity > Data transfer and the transfer partner from

the list other than Server sync and PC sync. Based on the settings, the selected data is copied or synchronized.

The other device also must be activated to receive data.

Synchronize from a compatible PC

To synchronize data from calendar, notes, and contacts from a compatible PC, use Bluetooth wireless

technology. You also need the correct version of Nokia PC Suite software for your phone installed on the PC.

See Computer connectivity p. 112 for information about Nokia PC Suite.

Synchronize the data in the phone contacts, calendar, and notes to correspond with the data of your

compatible PC by starting the synchronization from the PC.

Synchronize from a server

To use a remote Internet server, you have to subscribe to a synchronization service. For more information and

the settings required for this service, contact your service provider. You may receive the settings as a

configuration message. See Configuration settings service p. 14 and Configuration p. 77.

If you have saved data on the remote Internet server, you can synchronize your phone by starting the

synchronization from your phone.

Select Menu > Settings > Connectivity > Data transfer > Server sync. Depending on the settings, select

Initializing sync or Initializing copy.

Speed dialling > On and the names and phone numbers assigned to the

speed dialing keys, 2 to 9. To dial, press and hold the corresponding number key.

Call waiting > Activate — to set the network to notify you of an incoming call while you have a call in progress

(network service). See Call waiting p. 30.

Summary after call > On — to briefly display the approximate duration and cost (network service) of the call

after each call.

Send my caller ID > Yes — to show your phone number to the person you are calling (network service). To use

the setting agreed upon with your service provider, select Set by network.

■Phone

Select Menu > Settings > Phone and one of the following options:

Language settings > Phone language — to set the display language of your phone. If you select Automatic, the

phone selects the language according to the information on the SIM card.

• To select the USIM card language, select SIM language.

• To set a language for the voice playback, select Voice playback language. See Make a voice dialing call p. 30

and Voice commands in My shortcuts p. 67.

Memory status — to view the free memory and the used memory for each function in the list

Security keyguard — to set the phone to ask for the security code when you unlock the keyguard. Enter the

security code, and select On. When the keyguard is on, calls still may be possible to the official emergency

number programmed into your device.

Flight query — to set the phone to ask if Flight mode should be used each time the phone is turned on. In Flight

mode, all radio connections are turned off. Flight mode should be used in areas sensitive to radio emissions.

Welcome note — to create the welcome note you would like to be shown briefly when the phone is turned on

■Configuration

You can configure your phone with settings that are required for certain services to function correctly. The

services are multimedia messaging, instant messaging, synchronization, e-mail application, streaming, push to

talk, and browser. Your service provider may also send you these settings as a configuration message.

To save the configuration settings received as a configuration message, see Configuration settings service

p. 14.

Select Menu > Settings > Configuration and one of the following options:

Default configuration settings — to view the service providers saved in the phone. Scroll to a service provider,

and select Details to view the applications that the configuration settings of this service provider supports. To

set the configuration settings of the service provider as default settings, select Options > Set as default. To

delete configuration settings, select Delete.

Activate default in all applications — to activate the default configuration settings for supported applications

Preferred access point — to view the saved access points. Scroll to an access point, and select Options > Details

to view the name of the service provider, data bearer, and packet data access point or GSM dial-up number.

Connect to service provider support — to download the configuration settings from your service provider, if this

is supported by your service provider

Personal configuration settings — to add new personal accounts for various services manually, and to activate

or delete them. To add a new personal account if you have not added any, select Add new; otherwise, select

Options > Add new. Select the service type, and enter each of the required parameters. The parameters differ

according to the selected service type. To delete or activate a personal account, scroll to it, and select

Options > Delete or Activate.

■Security

When security features that restrict calls are in use (such as call barring, closed user group, and fixed dialing)

calls still may be possible to the official emergency number programmed into your device.

Select Menu > Settings > Security and one of the following options:

PIN code request — to set the phone to ask for your PIN or UPIN code every time the phone is switched on.

Some SIM cards do not allow the code request to be turned off.

Call barring service — to restrict incoming calls to and outgoing calls from your phone (network service). A

password is required.

Fixed dialling — to restrict your outgoing calls to selected phone numbers, if this function is supported by your

SIM card.

Closed user group — to specify a group of people whom you can call and who can call you (network service).

Security level > Phone — the phone asks for the security code whenever a new SIM card is inserted into the

phone. Select Memory and the phone asks for the security code when the SIM card’s memory is selected and

you want to change the memory in use.

Access codes — to set the PIN code or UPIN code in use, or to change the security code, PIN code, UPIN code,

PIN2 code, and call barring password.

Code in use — to select whether the PIN code or UPIN code should be active.

Authority certificates or User certificates — to view the list of the authority or user certificates downloaded

into your phone. See Certificates p. 109.

Security module settings — to view Security module details, activate Module PIN request, or change the module

PIN and signing PIN. See also Access codes p. 13.

■Restore factory settings

To reset some of the menu settings to their original values, select Menu > Settings > Restore settings and enter

the security code. Data that you have entered or downloaded is not deleted. For example, names and numbers

in Contacts are not affected.

10. Operator menu

Your service provider may have programmed an operator-specific menu into your phone. If this menu exists in

your phone, its functions depend entirely upon the service provider. Contact your service provider for more

information.

11. Gallery

In this menu, you can manage graphics, images, recordings, and tones. These files are arranged in

folders.

Your phone supports an activation key system to protect acquired content. Always check the delivery terms of

any content and activation key before acquiring them, as they may be subject to a fee.

The files stored in the Gallery use a memory that may have a capacity of approximately 11 MB in the phone.

You can use a compatible memory card to extend the memory capacity to store images, themes, graphics,

ringing tones, video clips, and sound clips in the Gallery.

To manage the files and folders, do the following:

1. Select Menu > Gallery. A list of folders is shown. If a memory card is inserted in the phone, the folder

Memory card, (unformat.), or the name of the memory card is shown.

2. Scroll to the folder you want. To view a list of files in the folder, select Open. For the available options,

select Options.

3. Scroll to the file you want to view, and select Open. For the available options, select Options.

■Format memory card

To format a new memory card, select Menu > Gallery. Scroll to the memory card folder, and select Options >

Format mem. card.

8. To take a self-portrait, close the fold to use the mini display as a view finder and press the camera release

key.

This Nokia device supports an image capture resolution of 1280 x 1024 pixels. The image resolution in these

materials may appear different.

Record a video clip

Select Menu > Media > Camera > Options > Video > Record. To pause recording, select Pause; to resume

recording, select Continue. To stop recording, select Stop. The phone saves the recording in Gallery > Video

clips. To view the options, select Options.

Camera settings

Select Menu > Media > Camera > Options > Settings and edit the available settings.

■Media player

With the media player you can view, play, and download files, such as images, audio, video and animated

images. You can also view compatible streaming videos from a network server (network service).

Select Menu > Media > Media player > Open gallery, Bookmarks, Go to address, or Media downloads.

Set for streaming service

You may receive the configuration settings required for the streaming as a configuration message from the

network operator or service provider. See Configuration settings service p. 14. To enter the settings manually,

see Configuration p. 77.

Select Menu > Media > Media player > Streaming sett. and one of the following options:

Configuration — Only the configurations that support streaming are displayed. Select a service provider,

Default, or Personal config.

Play options > Random > On — to play the tracks in the track list in random order. Select Repeat > Current

track or All tracks to play the current track or the entire track list repeatedly.

Media equaliser — to open the list of media equalizer sets. See Equalizer p. 87.

Send — to send the selected file using MMS or an Infrared connection

Web page — to connect to a browser service related to the current track. This function is only available when

the address of the service is included in the track.

Memory status — to view the free and used memory capacity

■Radio

The FM radio depends on an antenna other than the wireless device antenna. A compatible headset or

enhancement needs to be attached to the device for the FM radio to function properly.

Note: Listen to music at a moderate level. Continuous exposure to high volume may damage your hearing.

Select Menu > Media > Radio. To use the graphical keys , , , or on the phone display, scroll left or

right to the key you want and select it.

Save channels

1. To start the channel search, select and hold or . To change the radio frequency in 0.05 MHz steps,

press or .

2. To save the channel to a memory location 1 to 9, press and hold the corresponding number key.

3. To save the channel in the memory location from 10 to 20, press 1 or 2, and press and hold the number key

(0 to 9) you want.

4. Enter the name of the channel, and select OK.

Listen

1. Select Menu > Media > Radio.

2. To scroll to the channel you want, select or , or press the headset key.

3. To select a radio channel location, briefly press the corresponding number keys.

4. Select Options and one of the following options:

Turn off — to turn off the radio.

Save station — to save a new channel by entering the channel’s name

Visual Radio — to set whether the Visual Radio application is used (network service). To check the

availability and costs, contact your network operator or service provider. Some radio channels may send

text or graphical information that you can view using the Visual Radio application.

Visual Radio sett. — to select the options for Visual Radio. To set whether the Visual Radio application starts

automatically when you turn on the radio, select Enable visual service > Automatically.

Stations — to select the list of saved channels. To delete or rename a channel, scroll to the channel you

want, and select Options > Delete station or Rename.

Mono output or Stereo output — to listen to the radio in monophonic sound or in stereo.

Loudspeaker or Headset — to listen to the radio using the loudspeaker or headset. Keep the headset

connected to the phone. The lead of the headset functions as the radio antenna.

Set frequency — to enter the frequency of the radio channel you want.

You can normally make a call or answer an incoming call while listening to the radio. During the call, the

volume of the radio is muted.

When an application using a packet data or HSCSD connection is sending or receiving data, it may interfere

with the radio.

■Recorder

You can record pieces of speech, sound, or an active call. This is useful when recording a name and phone

number for writing them down later.

The recorder cannot be used when a data call, EGPRS, or GPRS connection is active.

Record sound

1. Select Menu > Media > Recorder.

2. To start recording, select . To start recording during a call, select Options > Record. While recording a

call, all parties to the call hear a faint beeping sound. When recording a call, hold the phone in the normal

position near to your ear.

3. To stop recording, select .

The recording is saved in Gallery > Recordings.

4. To listen to the latest recording, select Options > Play last recorded.

5. To send the last recording using infrared or as a multimedia message, select Options > Send last recorded.

List of recordings

1. Select Menu > Media > Recorder > Options > Recordings list.

The list of folders in the Gallery is shown.

2. Open Recordings to see the list with recordings.

3. Select Options to select options for files in the Gallery. See Gallery p. 80.

Define a storage folder

To use a folder other than Recordings as the default folder in the Gallery, select Menu > Media > Recorder >

Options > Select memory and a folder from the list.

■Equalizer

You can control the sound quality when using the music player by amplifying or attenuating frequency bands.

1. Select Menu > Media > Equaliser.

2. To activate a set, scroll to one of the equalizer sets, and select Activate.

3. To view, edit, or rename a selected set, select Options > View, Edit, or Rename.

Not all sets can be edited or renamed.

■Stereo widening

This function can only be used if your Nokia mobile phone is connected to a compatible stereo headset.

To enhance the sound that is available in stereo with a wider stereo effect, select Menu > Media > Stereo

widening > On.

13. Push to talk

Push to talk (PTT) over cellular is a two-way radio service available over a GSM/GPRS cellular

network (network service). PTT provides direct voice communication. To connect, press the volume up key.

You can use PTT to have a conversation with one person or with a group of people having compatible devices.

When your call is connected, the people you are calling do not have to answer the phone. The participants

should confirm the reception of any communication where appropriate, as there is no other confirmation

whether the recipients have heard the call.

To check availability and costs, and to subscribe to the service, contact your service provider. Roaming services

may be more limited than for normal calls.

Before you can use the PTT service, you must define the required PTT service settings. See PTT settings p. 93.

While you are connected to the PTT service, you can use the other functions of the phone. The PTT service is not

connected to traditional voice communication; therefore many of the services available for traditional voice

calls (for example, voice mailbox) are not available for PTT communication.

■Connect and disconnect

To connect to the PTT service, select Menu > Push to talk > Switch PTT on. indicates the PTT connection.

indicates that the service is temporarily unavailable. The phone automatically tries to reconnect to the service

until you disconnect from the PTT service. If you have added channels to the phone, you are automatically

joined to the active channels, and the name of the default channel is displayed in the standby mode.

To disconnect from the PTT service, select Switch PTT off.

■Make and receive a PTT call

Set the phone to use the loudspeaker or earpiece for PTT communication. When the earpiece is selected, use

the phone normally by holding it to your ear.

Warning: Do not hold the device near your ear when the loudspeaker is in use, because the volume may be

extremely loud.

When connected to the PTT service, you can make or receive channel calls, group calls, or one-to-one calls.

One-to-one calls are calls you make to only one person.

Press and hold the volume up key the entire time you are talking, and hold the phone in front of you so that you

can see the display. When you are finished, release the volume up key. Talking is allowed on a first come, first

served basis. When someone stops talking, the first person to press the key used for PTT can talk next.

To check the login status of your contacts, select Menu > Push to talk > Contacts list. This service depends on

your service provider and is only available for subscribed contacts.

indicates the contact is available.

indicates the contact is not logged into the PTT service.

indicates the contact is unknown.

indicates the contact does not want to be disturbed. You cannot call the contact, but you can send a

callback request.

To subscribe a contact, select Options > Subscribe contact; or if one or more contacts are marked, select

Subscribe marked.

Make a channel or a group call

To make a call to the default channel, press the volume up key. A tone sounds, indicating that the access is

granted, and the phone displays your nickname and channel name. See PTT channels p. 92.

To make a call to a nondefault channel, select Channel list in the PTT menu, scroll to the channel you want, and

press the volume up key.

To make a group call from Contacts, the recipients must be connected to the PTT service. Select Menu >

Contacts > Groups, scroll to the group you want, and press the volume up key.

Make a one-to-one call

To start a one-to-one call from the list of contacts to which you added the PTT address, select Contacts list.

Scroll to a contact, and press the volume up key.

You can also select the contact from Contacts.

To start a one-to-one call from the list of PTT channels, select Channel list, and scroll to the channel you want.

Select Members, scroll to the contact you want, and press the volume up key.

To start a one-to-one call from the list of callback requests you have received, select Callback inbox. Scroll to

the contact you want, and press the volume up key.

Make a PTT call to multiple recipients

You can select multiple PTT contacts from the contact list. The recipients receive an incoming call and must

accept the call to participate.

Select Menu > Push to talk > Contacts list, and mark the contacts you want. To make the call, press the volume

up key. The contacts who accept the call are shown.

Receive a PTT call

A short tone notifies you of an incoming PTT call. Information such as the channel name or the nickname

(network service) of the caller is displayed.

If you have set the phone to first notify you of one-to-one calls, accept or reject the call.

If you press the volume up key to try to respond to a call while another member is talking, you hear a tone, and

Queuing is displayed as long as you press the volume up key. Press and hold the volume up key, and wait for the

other person to finish; then you can talk.

■Callback requests

If you make a one-to-one call and do not get a response, you can send a request for the person to call you back.

Send a callback request

You can send a callback request in the following ways:

• To send a callback request from the contacts list in the Push to talk menu, select Contacts list. Scroll to a

contact, and select Options > Send callback.

• To send a callback request from Contacts, search for the contact you want, select Details, scroll to the PTT

address, and select Options > Send callback.

• To send a callback request from the channel list in the Push to talk menu, select Channel list, and scroll to

the channel you want. Select Members, scroll to the contact you want, and select Options > Send callback.

• To send a callback request from the callback request list in the Push to talk menu, select Callback inbox.

Scroll to a contact, and select Options > Send callback.

Respond to a callback request

When you receive a callback request, Callback request received is shown in the standby mode. Select View. The

list of contacts who have sent you callback requests is shown.

• To make a one-to-one call, press the volume up key.

• To send a call request back to the sender, select Options > Send callback.

• To delete the request, select Delete.

• To view the sender's PTT address, select Options > View PTT address.

• To save a new contact or to add the PTT address to a contact, select Options > Save as or Add to contact.

■Add a one-to-one contact

You can save the names of persons to whom you often make one-to-one calls in the following ways:

• To add a PTT address to a name in Contacts, search for the desired contact, and select Details > Options >

Add detail > PTT address.

Receive an invitation

When you receive a text message invitation to a group, Channel invitation received: is displayed.

1. To view the contact who sent the invitation and the channel address if the group is not a private channel,

select View.

2. To add the channel to your phone, select Save.

3. To set the status for the channel, select Active or Inactive.

4. To reject the invitation, select View > Discard > Yes.

■PTT settings

There are two kinds of PTT settings: settings for connecting to the service and settings for use.

You may receive the settings for connecting to the service from your network operator or service provider. See

Configuration settings service p. 14. You can enter the settings manually. See Configuration p. 77.

To select the settings for connecting to the service, select Menu > Push to talk > Config. settings and one of

the following options:

Configuration — to select a service provider, Default, or Personal config. for PTT service. Only the configurations

that support the PTT service are shown.

Account — to select a PTT service account in the active configuration settings.

You can also select from other available options.

To edit the PTT settings for use, select Menu > Push to talk > PTT settings, and one of the following options:

1 to 1 calls > On — to set the phone to allow the reception of one-to-one calls. To make but not receive one-to-

one calls, select Off. The service provider may offer some services that override these settings. To set the phone

to first notify you of incoming one-to-one calls with a ringing tone, select Notify.

PTT key default function selected > Open contact list, Open channel list, Call contact/group, or Call PTT channel

Show my login status > Yes — to enable the sending of the login status

PTT status in startup > Yes or Ask first — to set the phone to automatically connect to the PTT service when you

switch on the phone

Push to talk when roaming — to switch the PTT service on or off when the phone is used outside of the home

network

Send my PTT address > No — to hide your PTT address from calls

14. Organizer

Your Nokia mobile phone has many useful features for organizing your everyday life. The following

features are found in Organiser: alarm clock, calendar, to-do list, notes, countdown timer, and stopwatch.

■Alarm clock

The alarm clock uses the time format set for the clock. The alarm clock works even when the phone is turned off

if there is enough power in the battery.

To set the alarm, select Menu > Organiser > Alarm clock > Alarm time, and enter the alarm time. To change the

alarm time when the alarm time is set, select On. To set the phone to alert you on selected days of the week,

select Repeat alarm.

To select the alarm tone or set a radio channel as the alarm tone, select Menu > Organiser > Alarm clock >

Alarm tone. If you select the radio as an alarm tone, connect the headset to the phone. The phone uses the last

channel you listened to as the alarm, and the alarm plays through the loudspeaker. If you remove the headset

or switch off the phone, the default alarm tone replaces the radio.

To set a snooze time-out, select Snooze time-out, and the time you want.

Alert tone and message

The phone sounds an alert tone, and flashes Alarm! and the current time on the display, even if the phone is

switched off. To stop the alarm, select Stop. If you let the phone continue to sound the alarm for a minute, or

select Snooze, the alarm stops for the selected snooze time-out and then resumes.

If the alarm time is reached while the device is switched off, the device switches itself on and starts sounding the alarm tone.

If you select Stop, the device asks whether you want to activate the device for calls. Select No to switch off the device or Yes

to make and receive calls. Do not select Yes when wireless phone use may cause interference or danger.

■Calendar

The calendar helps you keep track of reminders, calls that you need to make, meetings, and birthdays.

Select Menu > Organiser > Calendar.

The current day is indicated by a frame in the month view. If there are any notes set for the day, the day is in

bold type. To view the day notes, select View. To view a week, select Options > Week view. To delete all notes in

the calendar, select the month or week view and Options > Delete all notes.

Other options for the calendar day view are make a note; delete, edit, or move a note; copy a note to another

day; send a note with Bluetooth wireless technology; or send a note as a text message or multimedia message

to the calendar of another compatible phone. In Settings, you can set the date and time settings. In the Auto-

delete notes option, you can set the phone to delete old notes automatically after a specified time.

Make a note

Select Menu > Organiser > Calendar, the date you want, and Options > Make a note and one of the following

note types: Meeting, Call, Birthday, Memo or Reminder.

Note alarm

The phone beeps, and displays the note. If a call note appears, to call the displayed number, press the call key.

To stop the alarm and to view the note, select View. To stop the alarm for 10 minutes, select Snooze. To stop

the alarm without viewing the note, select Exit.

■To-do list

You can save a note for a task that you have to do, select a priority level for the note, and mark it as done when

you have completed it. You can sort the notes by priority or by date.

■Countdown timer

1. Select Menu > Organiser > Timer > Normal timer; enter the alarm time in hours, minutes, and seconds; and

select OK.

You can write your own note text, which will display when the time expires.

2. To start the timer, select Start.

3. To change the countdown time, select Change time.

4. To stop the timer, select Stop timer.

If the alarm time is reached when the phone is in the standby mode, the phone sounds a tone and flashes the

note text (if it is set) or Countdown completed. Stop the alarm by pressing any key. If no key is pressed, the

alarm automatically stops within 60 seconds. To stop the alarm and to delete the note text, select Exit. To

restart the countdown timer, select Restart.

■Stopwatch

You can measure time, take intermediate times, or take lap times using the stopwatch. During timing, the other

functions of the phone can be used. To set the stopwatch timing in the background, press the end key.

Using the stopwatch or allowing it to run in the background when using other features increases the demand

on battery power and reduces the battery life.

Select Menu > Organiser > Stopwatch and one of the following options:

Split timing — to take intermediate times

• To start the time observation, select Start.

• To take an intermediate time, select Split.

• To stop the time observation, select Stop.

• To save the measured time, select Save.

• To start the time observation again, select Options > Start. The new time is added to the previous time.

• To reset the time without saving it, select Reset > Yes.

• To set the stopwatch timing in the background, press the end key.

Lap timing — to take lap times. To set the stopwatch timing in the background, press the end key.

Continue — to view the timing that you have set in the background

Show last time — to view the most recently measured time if the stopwatch is not reset

View times or Delete times — to view or delete the saved times

15. Applications

■Games

Your phone software includes some games.

Launch

Select Menu > Applications > Games, scroll to the game you want, and select Open.

For options related to a game, see Other application options p. 101.

Downloads

Select Menu > Applications > Options > Downloads > Game downloads. The list of available bookmarks is

shown.

Important: Only install and use applications and other software from sources that offer adequate security and

protection against harmful software.

Settings

To set sounds, lights, and shakes for the game, select Menu > Applications > Options > App. settings.

■Collection

Your phone software includes some Java applications, such as a calculator.

Note: This calculator has limited accuracy and is designed for simple calculations.

Launch an application

Select Menu > Applications > Collection; scroll to an application; and select Open, or press the call key.

Other application options

Delete — to delete the application or application set from the phone

Details — to give additional information about the application

Update version — to check if a new version of the application is available for download from the Web (network

service)

App. access — to restrict the application from accessing the network. Different categories are shown. Select in

each category one of the available permissions.

Web page — to provide further information or additional data for the application from an Internet page

(network service). It is only shown if an Internet address has been provided with the application.

Download applications

Important: Only install and use applications and other software from sources that offer adequate security and

protection against harmful software.

Your phone supports J2ME Java applications. Make sure that the application is compatible with your phone

before downloading it (network service).

You can download new Java applications in different ways:

• Select Menu > Applications > Options > Downloads > App. downloads, and the list of available bookmarks

is shown.

For the availability of different services, pricing, and tariffs, contact your service provider.

• Use the game download function. See Downloads p. 100.

• Use the Nokia Application Installer from Nokia PC Suite to download the applications to your phone.

Your device may have some bookmarks loaded for sites not affiliated with Nokia. Nokia does not warrant or endorse these

sites. If you choose to access them, you should take the same precautions, for security or content, as you would with any

Internet site.

16. Web

Your phone has a built-in browser you can use to connect to selected services on the mobile

Internet. Many wireless mobile Internet access features are network-dependent, and some features may not be

available. Contact your service provider for more information.

■Technology background

A technology called wireless application protocol (WAP) is to mobile devices what the world wide web (WWW)

is to personal computers. The mobile community began developing WAP several years ago to provide access to

the Internet for mobile users.

Most WAP sites are made up of text and hyperlinks. Some pages even contain low-resolution graphics, or

require data input. Your service provider and others are free to design WAP sites as they choose, so the sites are

as varied as the web pages on the Internet.

Internet content on your personal computer is called a web page. Internet content on your mobile phone is

called a page, WAP card, or a deck of cards. You may not be able to view all the details of the mobile Internet

pages, as page appearance may vary due to screen size.

■Service provider

Because mobile Internet content is designed to be viewed from your phone, your service provider is now your

mobile Internet service provider as well. It is likely that your service provider has created a home page and set

up your WAP browser to go to this page when you log on to the mobile Internet. Once at your service provider’s

home page, you may find links to a number of other sites.

■Access service

Set up service

You may receive the configuration settings required for browsing as a configuration message from the network

operator or service provider that offers the service that you want to use. See Configuration settings service

p. 14. You can also enter all the configuration settings manually. See Configuration p. 77.

Activate the settings

Ensure that the Web settings of the service you want to use are activated.

1. Select Menu > Web > Settings > Configuration settings > Configuration.

Only the configurations that support the browsing service are shown.

2. Select a service provider or Personal config. for browsing.

3. Select Account and a browsing service account contained in the active configuration settings.

4. If you want to perform manual user authentication for intranet connections, select Display terminal

window > Yes.

Connect to a service

There are several ways to connect to a service.

• To open the service’s home page, select Menu > Web > Home; or in the standby mode, press and hold 0.

• To select a bookmark, select Menu > Web > Bookmarks.

• To select the last viewed web site, select Menu > Web > Last web address.

• To enter the address of the service, select Menu > Web > Go to address, enter the address of the service, and

select OK.

■Browse

It should not be necessary to manually configure the browser on your phone. Normally this is done by your

service provider once you have subscribed to the feature. Contact your service provider if you have problems

using the browser.

After you make a connection to the service, you can start browsing its pages. The function of the phone keys

may vary in different services. Follow the text guides on the phone display. For more information, contact your

service provider.

If EGPRS or GPRS is selected as the data bearer, either or is shown in the top left of the display during

browsing. If you receive a call or a text message, or make a call during an EGPRS or GPRS connection, or

is shown in the top right of the display to indicate that the EGPRS or GPRS connection is suspended (on hold).

After a call, the phone tries to reconnect the EGPRS or GPRS connection.

Phone keys

• To browse through the page, press the scroll key in any direction.

• To select a highlighted item, press the call key.

• To enter letters and numbers, press the keys, 0 to 9.

• To enter special characters, press *.

Options

Beside the options available on your device, your service provider may offer other options.

Direct calling

The browser supports functions that you can access while browsing. You can make a phone call or save a name

and a phone number from a page.

Appearance settings

While browsing, select Options > Other options > Appear. settings; or in the standby mode, select Menu >

Web > Settings > Appearance settings and one of the following options:

Text wrapping > On — to set the text to continue on the next line in the display. If you select Off, the text is

abbreviated.

Font size — to set the font size for mobile Internet pages.

Show images > No — to hide pictures on the page. This can speed up the browsing of pages that contain a lot of

pictures.

Alerts > Alert for unsecure connection > Yes — to set the phone to alert when an encrypted connection

changes to an unencrpyted one during browsing.

Alerts > Alert for unsecure items > Yes — to set the phone to alert when an encrypted page contains an

unsecure item. These alerts do not guarantee a secure connection. For more information, see Browser security

p. 108.

Character encoding > Content encoding — to select the encoding for the browser page content

Character encoding > Unicode (UTF-8) web addresses > On — to set the phone to send a URL as a UTF-8

encoding. You may need this setting when you access a web page created in a foreign language.

Screen size > Full or Small— to set the screen layout

JavaScript > Enable — to enable the Java scripts

■Security settings

A cookie is data that a site saves in the cache memory of your phone. Cookies are saved until you clear the

cache memory. See Cache memory p. 107.

While browsing, select Options > Other options > Security > Cookie settings; or in the standby mode, select

Menu > Web > Settings > Security settings > Cookies. To allow or prevent the phone receiving cookies, select

Allow or Reject.

Scripts over secure connection

You can select whether to allow the running of scripts from a secure page. The phone supports WML scripts.

While browsing, select Options > Other options > Security settings > WMLScripts over secure connection; or in

the standby mode, select Menu > Web > Settings > Security settings > WMLScripts over secure connection. To

allow the scripts, select Allow.

■Bookmarks

You can save page addresses as bookmarks in the phone memory.

1. While browsing, select Options > Bookmarks; or in the standby mode, select Menu > Web > Bookmarks.

2. Scroll to a bookmark, and select it; or press the call key to make a connection to the page associated with

the bookmark.

3. Select Options to view, edit, delete, or send the bookmark; create a new bookmark; or move the bookmark

to a folder.

Your device may have some bookmarks loaded for sites not affiliated with Nokia. Nokia does not warrant or endorse these

sites. If you choose to access them, you should take the same precautions, for security or content, as you would with any

Internet site.

Receive

When you have received a bookmark that is sent as a bookmark, 1 bookmark received is displayed. The received

bookmark is saved automatically to Bookmarks. To view it, select Show > Bookmarks.

Specyfikacje produktu

Marka:	Nokia
Kategoria:	Przenośny
Model:	6125

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Nokia 6125, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Przenośny Nokia

Nokia 9100 Instrukcja

4 Lipca 2024

Nokia 8250 Instrukcja

3 Lipca 2024

Nokia 8800 arte Instrukcja

3 Lipca 2024

Nokia n81 8gb Instrukcja

3 Lipca 2024

Nokia N95 Instrukcja

3 Lipca 2024

Nokia e55 Instrukcja

3 Lipca 2024

Nokia 6124 classic Instrukcja

3 Lipca 2024

Nokia x3 Instrukcja

3 Lipca 2024

Nokia C1-02 Instrukcja

3 Lipca 2024

Nokia 5030 Instrukcja

3 Lipca 2024

Instrukcje Przenośny

Najnowsze instrukcje dla Przenośny

Huawei T211 Instrukcja

15 Stycznia 2025

Swissvoice mp01 Instrukcja

12 Stycznia 2025

Geemarc CL8360 Instrukcja

11 Stycznia 2025

HTC P3300 Instrukcja

11 Stycznia 2025

Alcatel IP Touch 600 Instrukcja

21 Grudnia 2024

Sanyo Katana II - Sprint Instrukcja

17 Grudnia 2024

Sunstech Arrow Instrukcja

5 Października 2024

Swisstone SD 530 Instrukcja

5 Października 2024

Emporia EUPHORIA 3G Instrukcja

5 Października 2024

Emporia Telme C135 Instrukcja

5 Października 2024