Instrukcja obsługi Nitecore MH25GT
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Nitecore MH25GT (1 stron) w kategorii Zaklampen. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/1
®User Manual
Features
• Premium CREE XP-L HI V3 LED
• Maximum output of 1000 lumens
• Max beam distance up to 452 metres
• High efficiency circuit provides runtime up to 36 hours
• Intelligent charging circuit with voltage detection charges safely and rapidly
• USB rechargeable, onboard USB charging port is water, dust and impact resistant
• Multiple output modes are conveniently accessed via rapid rotary switch
• User-defined mode provides customized brightness levels plus strobe and SOS modes
• Intelligent memory function stores preferred brightness setting
• Broad voltage circuit accepts both rechargeable and non-rechargeable Lithium batteries
• Optimized ultra-precise reflector offers a longer beam distance than competing products
• Waterproof in accordance with IPX-8 (submersible to two meters)
• Stainless steel bezel ring protects core components from damage
• Toughened ultra-clear mineral glass with anti-reflective coating
• Constructed from aerospace-grade aluminum alloy
• HAIII military grade hard-anodized
• Reverse polarity protection
• Stainless steel titanium-plated clip
• Anti-rolling design
Dimensions
Length: 160mm (6.3”)
Head Diameter: 40mm (1.57”)
Tail Diameter: 25.4mm (1”)
Weight: 143grams (5oz)(without battery)
Thanks for purchasing NITECORE!
Battery Options
The All-Round Flashlight Expert
Operation instructions
Battery Installation
1. Unscrew the tail cap in counter-clockwise direction.
2. Insert one 18650 battery or two CR123
batteries with the positive pole pointing
forward (toward the light head).
NOTE:
Ensure batteries are inserted with the positive (+) end
pointing to the head. The MH25GT will not operate with
incorrectly inserted batteries.
Charging Function
3. If a problem is detected during the charging process, the MH25 will stop charging and the
red indicator will blink rapidly. This is usually caused by faulty or incorrectly inserted
batteries.
4. When charging is complete, the red indicator will illuminate steadily.
Accessories
Nitecore 18650 Li-ion battery(NL1834 3400mAh),
tactical ring, lanyard, USB cable, clip,
holster, spare switch cover and spare O-ring
TYPE
Nominal voltage
Compatible
Primary Lithium battery * CR123 3V Yes (Compatible but can
NOT be recharged)
Yes (Compatible but can
NOT be recharged)
18650 Rechargeable Li-ion battery 18650 3.7V Yes (Compatible and can
be recharged)
Rechargeable Li-ion battery * RCR123 3.7V
*Warning: Charge 18650 rechargeable Li-ion batteries only, do not attempt to charge
non-rechargeable batteries, CR123 or RCR123 batteries.
Brightness & Runtime
18650 2×CR123
TURBO HIGH MID LOW
LUMENS
300
LUMENS
1000
LUMENS
110
LUMENS
50
36
h
45
min
1
h
7
h min45
10
h min45
4
h
23
h
3
h
15
min
452m (Beam Distance)
51,100cd (Peak Beam Intensity)
IPX-8, 2m
(Waterproof AND Submersible)
1.5m (Impact Resistant)
NOTICE
Stated data has been
measured according to the
international flashlight
testing standards
ANSI/NEMA FL1 using a
quality NITECORE 18650
(3.7V 3400mAh) battery or
2×CR123 (3V 1700mAh)
batteries under laboratory
conditions. The data may
vary due to individual usage
habits and environmental
conditions.
Caution:
The MH25GT needs to be turned on in
order to enter charging mode.
Switching ON/OFF
To switch ON: Press the button on the tailcap until a “click” is heard.
To switch OFF: Press the button on the tailcap a second time until a “click” is heard.
Mode Switching
The Nitecore MH25GT has two modes: Turbo and user-defined. These two modes can be
changed by simply tightening and loosening the flashlight head. Turbo provides 100% output
while user-defined contains five selectable sub-modes.
Turbo Mode
Turbo mode provides an output of 1000 lumens and is accessed when the flashlight is
switched ON with the head lightly tightened. While in this mode, momentary illumination can
be achieved by switching off the flashlight and then half pressing and holding the switch.
Note: After three minutes of use in turbo mode, the flashlight will lower its output
automatically to preventing overheating and increase runtime.
User-Defined Mode
User-defined mode is accessed by slightly loosening the flashlight head. In this mode, lightly
and rapidly pressing the switch will cycle through brightness and other functions in the
following order: “High-Mid-Low-SOS-Strobe”. Pressing the switch all the way down will save
and memorize a desired setting.
Tips: Make NITECORE MH25GT your perfect Multitask Hybrid flashlight.
NITECORE MH25GT flashlights essentially have two modes: Turbo mode (100% output) and
user-defind mode. Turbo mode is accessed by tightening the flashlight head while any of the
five customizable modes (strobe, SOS, low, medium and high) are selected by loosening the
head and rapidly pressing the on/off switch to cycle through the modes. A given mode can be
saved by simply turn off the light while in that mode. Real-world examples include: When
used as a flashlight around the home, the head can be loosened and low level selected in
user-defind mode, providing long runtimes at a lower light intensity. The same flashlight could
then be taken out and used a law-enforcement duty light, with user-defined mode set in
strobe, making it easy to alternate between turbo mode and strobe with a simple twist of the
flashlight head.
Changing / Charging Battery
Batteries should be replaced or recharged when output appears to be dim or the flashlight
becomes unresponsive.
Maintenance
Every 6 months, threads should be wiped with a clean cloth followed by a thin coating of
silicon-based lubricant.
Warranty Details
Our authorized dealers and distributors are responsible for warranty service. Should any
problem covered under warranty occurs, customers can contact their dealers or distributors in
regards to their warranty claims, as long as the product was purchased from an authorized
dealer or distributor. NITECORE’s Warranty is provided only for products purchased from an
authorized source. This applies to all NITECORE products.
Any DOA / defective product can be exchanged for a replacement through a local
distributor/dealer within the 15 days of purchase. After 15 days, all defective / malfunctioning
NITECORE® products can be repaired free of charge for a period of 60 months (5 years)
from the date of purchase. Beyond 60 months (5 years), a limited warranty applies, covering
the cost of labor and maintenance, but not the cost of accessories or replacement parts.
The warranty is nullified if the product(s) is/are broken down, reconstructed and/or modified
by unauthorized parties, or damaged by batteries leakage.
For the latest information on NITECORE® products and services, please contact a local
NITECORE® distributor or send an email to service@nitecore.com.
※All images, text and statements specified herein this user manual are for reference purpose
only. Should any discrepancy occurs between this manual and information specified on
www.nitecore.com. Sysmax Industry Co., Ltd. reserves the rights to interpret and amend the
content of this document at any time without prior notice.
The MH25GT is capable of charging a protected 18650 Li-ion battery via the included USB
cable. Simply install a protected 18650 Li-ion cell, plugging one end of the USB cable into the
flashlight and the other end into a universal USB port / adaptor and the MH25GT will take
care of the rest.
Charging indicator light
1. Connect the charging cable to the flashlight and the A/C power adapter to the wall outlet as
shown in the adjacent image. Fully charging a depleted 18650 battery takes approximately
6 hours.
2. Under normal charging conditions, the red indicator light near the charging port will blink
twice every second.
20160829
Please find us on facebook:
NITECORE Flashlights
SYSMAX Industry Co., Ltd.
TEL: +86-20-83862000
FAX: +86-20-83882723
E-mail: info@nitecore.com
Web: www.nitecore.com
Address： Rm1401-03, Glorious Tower, 850 East Dongfeng Road,
Guangzhou, China 510600
MH25GT
Specyfikacje produktu
| Marka: | Nitecore |
| Kategoria: | Zaklampen |
| Model: | MH25GT |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Nitecore MH25GT, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Zaklampen Nitecore
12 Października 2024
12 Października 2024
12 Października 2024
11 Października 2024
9 Sierpnia 2024
8 Sierpnia 2024
7 Sierpnia 2024
4 Lipca 2024
4 Lipca 2024
3 Lipca 2024
Instrukcje Zaklampen
- Zaklampen Worx
- Zaklampen Milwaukee
- Zaklampen Panasonic
- Zaklampen Black & Decker
- Zaklampen Fenix
- Zaklampen Makita
- Zaklampen Petzl
- Zaklampen Crivit
- Zaklampen Ansmann
- Zaklampen Maglite
- Zaklampen Olight
- Zaklampen Alecto
- Zaklampen Anslut
- Zaklampen Streamlight
- Zaklampen Silva
- Zaklampen Klarus
- Zaklampen Pelican
- Zaklampen Masai
- Zaklampen LED Lenser
Najnowsze instrukcje dla Zaklampen
12 Października 2024
11 Października 2024
11 Października 2024
11 Października 2024
11 Października 2024
10 Października 2024
8 Października 2024
7 Października 2024
6 Października 2024
6 Października 2024