Instrukcja obsługi Netgear FA511

Netgear Karta sieciowa/adapter FA511

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Netgear FA511 (2 stron) w kategorii Karta sieciowa/adapter. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/2

)NSTALLATION'UIDE

Estimated Completion: 10 minutes.

Follow these instructions to install the FA511 Fast Ethernet CardBus Adapter in a

notebook computer with the Windows Vista, Windows XP or Windows 2000 operating

system with the latest service pack.

Verify that your package contains the following items:

• Model FA511 Fast Ethernet CardBus Notebook Adapter

• GearBox® for Adapters CD

• Installation Guide and Warranty Card

1. First, install the FA511 CardBus Adapter.

The FA511 CardBus is hot swappable which means that you can insert it into a PC

that is either powered on or shut down.

a. Insert the FA511 CardBus Adapter into the CardBus slot on your notebook

computer. Some PCs have more than one PCMCIA or CardBus slot; the FA511

can only be inserted into the CardBus Notebook adapter slot.

Hold the PC Card with the NETGEAR logo facing up and insert it into the Card-

Bus slot. Do not use excessive force, but make sure the card is fully inserted into

the slot.

b. Insert the RJ-45 adapter cable into the connector on the outer edge of the network

card.

a. Use a UTP cable to connect any port on a switch or hub to the FA511 Fast

Ethernet CardBus Adapter.

Note: One of the ports on NETGEAR hums is switchable between Normal (MDI-X)

and Uplink (MDI) with a Normal/Uplink push button. If you are using this switchable

port on a NETGEAR hub to connect to a PC or the network card, make sure the

Normal/Uplink push button is set to Normal.

Warning: Windows detects the Ethernet adapter, and automatically installs a driver

based on its chipset. You must update that driver to work with the NETGEAR FA511

Fast Ethernet CardBus Adapter.

2. Then, install the FA511 network driver for your OS.

To install the FA511 drive for Windows XP, 2000, Me or 98:

Note: If the “Insert Disk” window opens and a message prompts you to insert your

Windows CD-ROM, insert the CD and click “OK”. Then follow the next step in the

instructions.

a. Insert the GearBox™ for Adapters CD into your CD-ROM drive. Windows will

automatically detect the new FA511 CardBus Adapter hardware.

b. Follow the Found New Hardware Wizard steps.

c. Accept the Install the software automatically setting, and click Next to

proceed.

Note: If Windows XP or 2000 displays a Windows XP Logo Testing or a Digital

Signature Not Found warning, click Continue Anyway or Yes to proceed.

d. Click Finish to complete the installation. If prompted to restart your computer,

power down and restart the notebook.

To install the FA511 driver for Windows Vista OS:

a. Insert the GearBox™ for Adapters CD into your CD-ROM drive.

b. From the Found New Hardware screen, select “Ask me again later”.

c. On the Found New Hardware—Ethernet Controller screen, select “I don’t

have the disc. Show me other options.”

d. When the Windows couldn’t find driver software for your device message

displays, select “Check for a solution.”

e. Then browse to the path where the fa511_vista\VISTA32 file is located and click

Next. The Vista driver software will then be installed.

3. Now, configure the FA511.

a. Double-click the connection icon in the Windows system tray to open the

Windows network connection page.

If the connection icon is not visible, you can change the connection properties by

going to Start > Control Panel > Network Connections.

b. Double-click on the FA511 Fast Ethernet CardBus Adapter connection.

c. Click Configure.

d. Click Properties and configure the FA511 according to your network

requirements.

For assistance with configuring the network settings, please see the networking

tutorials on the NETGEAR Resource CD.

4. Finally, verify network connectivity.

a. From the Start menu, select Control Panel > System. The System Properties

screen will display.

b. Select the Hardware tab, click Device Manager and select Network adapters. A

list of the available Network Adapters will display.

c. Double-click the “NETGEAR FA511 CardBus Notebook Adapter.” A message

screen will display describing the status of the device.

Note: If there is a problem with the installation of the driver, an exclamation

point will appear next to the “NETGEAR FA511 CardBus Notebook Adapter.”

Try rebooting your computer or see the Troubleshooting section below.

If you have trouble setting up your FA511, check the tips below. You can also consult

more extensive troubleshooting procedures on the NETGEAR, Inc. support website at

http://kbserver.netgear.com/products/FA511.asp

Thank you for selecting NETGEAR products.

After completing setup and configuration, locate the serial number on the bottom label of

the FA511 Fast Ethernet CardBus Adapter and use it to register your product at

http://www.netgear.com/register.

Registration on the web site or over the phone is required before you can use our

telephone support service. The phone numbers for worldwide regional customer support

centers are on the Warranty and Support Information card that came with your product.

Symptom Cause Solution

The Adapter LED

lights are not lit.

The FA511 is not

inserted into the slot

properly or the

FA511 software is

not loaded.

Make sure the notebook is fully powered

on.

Remove and reinsert the FA511.

Check the Windows device manager to

see if the FA511 Fast Ethernet CardBus

Adapter is recognized and enabled.

Reload the FA511 software, if necessary.

The Link/Act LED

light is lit, but the

100 LED is not lit.

The FA511 is

operating at 10

Mbps.

The computer is connected to a router or

other network device that is operating at

10 Mbps.

If you connect to a 100 Mbps device, the

100 LED will be green.

The 100 LED is

blinking

intermittently.

There is a problem

with the link such as

a speed mismatch,

possible bad cable,

bad connector, or

configuration

mismatch.

Check the network cable and make sure it

is functioning properly.

Try plugging the network cable into a

different port on the router attached to the

Ethernet adapter.

Go to http://www.netgear.com/support for product updates and web support.

Trademarks

NETGEAR® is a registered trademark of NETGEAR,INC.Windows®is a registered trademark of

Microsoft Corporation.Other brand and product names are trademarks or registered trademarks of

Statement of Conditions

In the interest of improving internal design, operational function, and/or reliability, NETGEAR

reserves the right to make changes to the products described in this document without notice. NET-

GEAR does not assume any liability that may occur due to the use or application of the product(s) or

circuit layout(s) described herein.

Certificate of the Manufacturer/Importer

It is hereby certified that the Model FA511 s been suppressed in CardBus Notebook Adapter ha

accordance with the conditions set out in the BMPT-AmtsblVfg 243/1991 and Vfg 46/1992. The

operation of some equipment (for example, test transmitters) in accordance with the regulations

may, however, be subject to certain

restrictions. Please refer to

the notes in the operating instruc-

tions. Federal Office for Telecommunications Approvals has been notied of the placing of this

equipment on the market and has been granted the right to test the series for compliance with the

regulations.

VCCI Statement

This equipment is in the Class B category (information equipment to be used in a residential area or

an adjacent area thereto) and conforms to the standards set by the Voluntary Control Council for

Interference by Data Processing Equipment and Electronic Office Machines aimed at preventing

radio interference in such residential areas.

When used near a radio or TV receiver, it may become the cause of radio interference. Read instruc-

tions for correct handling.

Federal Communications Commission (FCC) Compliance Notice: Radio Frequency Notice

This device complies with part 15 of the FCC Rules.Operation is subject to the following two condi-

tions:

1.This device may not cause harmful interference.

2.This device must accept any interference received, including interference that may cause undes-

ired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable pro-

tection against harmful interference in a residential installation. This equipment generates, uses, and

can radiate radio frequency energy and, if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications. However, there is no guarantee that inter-

ference will not occur in a particular installation. If this equipment does cause harmful interference

to radio or television reception,

which can be determined by turn

ing the equipment off and on, the

user is encouraged to try to correct the interference by one or more of the following measures: (1)

Reorient or relocate the receiving antenna, (2) Increase the separation between the equipment and

receiver, (3) Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected, (4) Consult the dealer or an experienced radio/TV technician for help.

EN 55 022 Statement

This is to certify that the Model FA511 CardBus Notebook Adapter is shielded against the genera-

tion of radio interference in accordance with the application of Council Directive 89/336/EEC, Arti-

cle 4a. Conformity is declared by the application of EN 55 022 Class B (CISPR 22). Compliance is

dependent upon the use of shielded data cables.

Canadian Department of Communications Radio Interference Regulations

This digital apparatus (Model FA511 CardBus Notebook Adapter) does not exceed the Class B lim-

its for radio-noise emissions from nce Regulations digital apparatus as set out in the Radio Interfere

of the Canadian Department of Communications.

Règlement sur le brouillage radioélectrique du ministère des Communications

Cet appareil numérique (Model FA511 CardBus Notebook Adapter) respecte les limites de bruits

radioélectriques visant les appareils numériques de classe B prescrites dans le Règlement sur le

brouillage radioélectrique du ministère des Communications du Canada.

This symbol was placed in accordance with the European Union Directive

2002/96 on the Waste Electrical and Electronic Equipment (the WEEE

Directive). If disposed of within the European Union, this product should be

treated and recycled in accordance with the laws of your jurisdiction

implementing the WEEE Directive.

of NETGEAR, Inc. in the United States and/or other countries. Other brand and product names are trademarks

or registered trademarks of their respective holders. Information is subject to change without notice.

Specyfikacje produktu

Marka:	Netgear
Kategoria:	Karta sieciowa/adapter
Model:	FA511

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Netgear FA511, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Karta sieciowa/adapter Netgear

Netgear A6200 Instrukcja

14 Września 2024

Netgear XAVB2501 Instrukcja

2 Września 2024

Netgear RangeMax 240 Instrukcja

1 Września 2024

Netgear GA511 Instrukcja

30 Sierpnia 2024

Netgear FA411 Instrukcja

30 Sierpnia 2024

Netgear Powerline AV+ 200 NDP Instrukcja

29 Sierpnia 2024

Netgear FA312 Instrukcja

25 Sierpnia 2024

Netgear FA120 Instrukcja

23 Sierpnia 2024

Netgear GA311 Instrukcja

22 Sierpnia 2024

Netgear WNDA4100 Instrukcja

21 Sierpnia 2024

Instrukcje Karta sieciowa/adapter

Najnowsze instrukcje dla Karta sieciowa/adapter

ZyXEL WBE510D Instrukcja

14 Stycznia 2025

StarTech.com 107B-USB-HDMI Instrukcja

14 Stycznia 2025

StarTech.com ST1000SPEXD4T Instrukcja

8 Stycznia 2025

Edimax EU-4307 V2 Instrukcja

29 Grudnia 2024

StarTech.com O1210I-NETWORK-CARD Instrukcja

28 Grudnia 2024

Micro Connect MC-POEADAPTER-USB-C Instrukcja

27 Grudnia 2024

Lindy 43237 Instrukcja

27 Grudnia 2024

Lindy 43247 Instrukcja

27 Grudnia 2024

Akasa AK-PCCE25-01 Instrukcja

26 Grudnia 2024

OpenVox AE2410E40 Instrukcja

26 Grudnia 2024