Instrukcja obsługi Nedis WIFIP310FWT

Nedis Gniazdo elektryczne WIFIP310FWT

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Nedis WIFIP310FWT (8 stron) w kategorii Gniazdo elektryczne. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/8
Full manual Nedis SmartLife ™
Download the app: Nedis SmartLife from Apple App store or Google Play Store.
Create account
Select country code and enter full naonal phone number or email address and then
request vericaon code.
Enter received vericaon code and pick your own password.
Add device
1. Tap “+” on the top right corner. A list of potenal products appears.
2. Select the device type you want to add from the list
3. Acvate the device to be added by plugging it in or connecng the baer y.
4. Make sure the indicaon LED (or the lighng device) ashes quickly (as shown in example in the
applicaon) and tap the buon to conrm.
If the light is not ashing quickly hold the reset buon (or switch the bulb o and on for 3 mes) unl
it ashes.
5. Conrm your phone is connected to the Wi-Fi network to which the device will be added, enter the
Wi-Fi password and conrm.
6. Now the device will be searched, make sure your phone and the device are close to the router to
opmize recepon.
7. Aer the product is found and added, rename it so you can easily recognize it.
If above method fails (this can be due to unstable network or specic network protecon) add the device using
AP mode by following the steps below.
Add device (AP mode)
1. Tap “+” on the top right corner. A list of potenal products appears.
2. Select the device type you want to add from the list
3. Hold the reset buon (or switch the bulb o and on for 3 mes) unl the indicaon LED (or lighng
device) ashes (as shown in example) SLOWLY
If the light is ashing quickly, reset again by holding the reset buon for about 5 seconds or switching
the light o and on 3 mes.
4. Conrm the Wi-Fi network to which the device will be added, enter the Wi-Fi password and conrm.
5. Connect -Fi hotspot (SmartLife_xxxx) your phone to the device’s Wi
6. If asked: conrm to stay connected to Wi-Fi network without internet access
7. Go back to the Nedis SmartLife applicaon to connue installaon.
8. Now the device is sent the instrucons to connect to your exisng Wi-Fi network, make sure your
phone and the device are close to the router to opmize recepon.
9. Aer the product is found and added, rename it so you can easily recognize it.
Connecng to Amazon Alexa
(only required for rst me use of Nedis SmartLife in combinaon with Amazon Alexa)
1. An ocial Alexa device and Amazon Alexa account are required
2. Open Amazon Alexa App on your smartphone and login
3. Open the menu by tapping on the upper le corner
4. Go to Skills
5. Search for “Smart Life” and tap Enable
6. You will be redirected to a login page to conrm the country/region and enter your Nedis SmartLife
account and password. Then conrm you are using the app SmartLife
7. Authorize Amazon to use your prole and connect with your products
8. Aer successful link is conrmed, close the window and go back to homescreen of Amazon Alexa app
to add your smart product(s).
Add product(s) to Amazon Alexa
9. Aer you have installed new products in the SmartLife applicaon, ask “Alexa, discover devices” or
open the Amazon Alexa app menu – – Smart Home and tap “+ Add Device”
10. In about 20 seconds, the products will automacally be added to the Alexa product list and can then
be controlled using Amazon Alexa.
Connecng to Google Home / Google Assistant
(only required for rst me use of Nedis SmartLife in combination with Google Home
1. Hold the home buon to start Google Assistant
2. Tap on the compass in the upper right corner to explore Assistant’s funconality
3. Now open the menu on the upper right corner and go to Sengs
4. Open “Home Control”
5. Tap “+” to add products
6. Search for “Smart Life” to add this skill
7. Conrm your country code and enter your Nedis SmartLife account name and password
8. Then conrm you are using the app SmartLife
9. Authorize Google to use your prole and connect with your products
10. Any installed products as well as created scenes or automaons are automacally being linked, you
can assign a room to each product.
Add product(s) to Google Home / Google Assistant
11. Aer you have installed new products or created new scenes or automaons in the SmartLife
applicaon, ask Google Assistant to “Sync devices” so they can be controlled or acvated using
Google Home.
App interface:
My Family (main screen)

Specyfikacje produktu

Marka: Nedis
Kategoria: Gniazdo elektryczne
Model: WIFIP310FWT

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Nedis WIFIP310FWT, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Gniazdo elektryczne Nedis

Nedis

Nedis WIFIP310FWT Instrukcja

17 Grudnia 2024

Instrukcje Gniazdo elektryczne

Najnowsze instrukcje dla Gniazdo elektryczne

SKROSS

SKROSS PRO - World Instrukcja

17 Grudnia 2024
CyberPower

CyberPower P405UC Instrukcja

17 Grudnia 2024
Berker

Berker 48047003 Instrukcja

16 Grudnia 2024
Berker

Berker 48048989 Instrukcja

16 Grudnia 2024
Berker

Berker 48046086 Instrukcja

16 Grudnia 2024
Berker

Berker 48048982 Instrukcja

16 Grudnia 2024
EQ-3

EQ-3 AG HmIP-BPS Instrukcja

15 Grudnia 2024
Vimar

Vimar 20335.B Instrukcja

15 Grudnia 2024
Vimar

Vimar 20266.C.B Instrukcja

15 Grudnia 2024
Vimar

Vimar 20223.A Instrukcja

15 Grudnia 2024