Instrukcja obsługi NEC ST-EX2023

NEC Wsparcie dla płaskich paneli ST-EX2023

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla NEC ST-EX2023 (2 stron) w kategorii Wsparcie dla płaskich paneli. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/2

ST-EX2023 Installation Instructions / Instructions d'installation / Montageanweisung /Instrucciones de instalación /

Istruzioni di installazione / 取扱説明書 / 安装说明书

English

Materials included in package

1. ST-EX2023 with attachment foot for EX201W x 1

2. Attachment foot for EX231W or EX231Wp x 1

3. Rubber feet x 2

4. Quick Start Guide x 1

Français

Materials included in package

1. ST-EX2023 with attachment foot for EX201W x 1

2. Attachment foot for EX231W or EX231Wp x 1

3. Rubber feet x 2

4. Quick Start Guide x 1

Deutsch

Materials included in package

1. ST-EX2023 with attachment foot for EX201W x 1

2. Attachment foot for EX231W or EX231Wp x 1

3. Rubber feet x 2

4. Quick Start Guide x 1

Español

Materials included in package

1. ST-EX2023 with attachment foot for EX201W x 1

2. Attachment foot for EX231W or EX231Wp x 1

3. Rubber feet x 2

4. Quick Start Guide x 1

Italiano

Materials included in package

1. ST-EX2023 with attachment foot for EX201W x 1

2. Attachment foot for EX231W or EX231Wp x 1

3. Rubber feet x 2

4. Quick Start Guide x 1

日本語

Materials included in package

1. ST-EX2023 with attachment foot for EX201W x 1

2. Attachment foot for EX231W or EX231Wp x 1

3. Rubber feet x 2

4. Quick Start Guide x 1

简体中文

Materials included in package

1. ST-EX2023 with attachment foot for EX201W x 1

2. Attachment foot for EX231W or EX231Wp x 1

3. Rubber feet x 2

4. Quick Start Guide x 1

1234

AB

English

1

2 3

Français Deutsch

Installing stand:

You use this stand for both size 20" (EX201W) and 23" (EX231W/EX231Wp)

by change attachment foot.

CAUTION: Do not use this stand for EX201W with attachment foot for

EX231W/EX231Wp. It may cause monitor fall down and make serious

damage to the monitor.

For EX201W user: Proceed to step 3.

For EX231W or EX231Wp user: Change attachment foot following the below

instruction.

1 Press Quick Release Button and pull out the attachment foot.A

2 Attach the attachment foot with "23 only".

3 1) Turn off the power to the monitor.

2) Paste two rubber feet on the bottom of the monitor.B

3) Place monitor face down on a non-abrasive surface.

NOTE: Handle with care when placing monitor face down to avoid

damaging the front control keys.Put the upper hooks of the stand in the

slot of the monitor then push stand into monitor in direction of the arrow

as shown and conrm that the stand is locked. Open the stand with

widely extended until feeling a "click" feeling.

To reattach the stand, please refer to monitor's user's manual.

Before using:

Use this stand with widely extended until feeling a "click" feeling.

CAUTION: Improper setting may cause the monitor fall down and make serious damage to the monitor.

Human Sensor position is below as normal stand. Please make sure there is no object in front of Human Sensor.

Be sure to observe the cautions described in the monitor's operating manual when handling the monitor.

For EX201W

For EX231W / EX231Wp

Unit: mm

Weight: ??

Weight: ??

Installing stand:

You use this stand for both size 20" (EX201W) and 23" (EX231W/EX231Wp)

by change attachment foot.

CAUTION: Do not use this stand for EX201W with attachment foot for

EX231W/EX231Wp. It may cause monitor fall down and make serious

damage to the monitor.

For EX201W user: Proceed to step 3.

For EX231W or EX231Wp user: Change attachment foot following the below

instruction.

1 Press Quick Release Button and pull out the attachment foot.A

2 Attach the attachment foot with "23 only".

3 1) Turn off the power to the monitor.

2) Paste two rubber feet on the bottom of the monitor.B

3) Place monitor face down on a non-abrasive surface.

NOTE: Handle with care when placing monitor face down to avoid

damaging the front control keys.Put the upper hooks of the stand in the

slot of the monitor then push stand into monitor in direction of the arrow

as shown and conrm that the stand is locked. Open the stand with

widely extended until feeling a "click" feeling.

To reattach the stand, please refer to monitor's user's manual.

Before using:

Use this stand with widely extended until feeling a "click" feeling.

CAUTION: Improper setting may cause the monitor fall down and make serious damage to the monitor.

Human Sensor position is below as normal stand. Please make sure there is no object in front of Human Sensor.

Be sure to observe the cautions described in the monitor's operating manual when handling the monitor.

For EX201W

For EX231W / EX231Wp

Unité: mm

Poids: ??

Poids: ??

Installing stand:

You use this stand for both size 20" (EX201W) and 23" (EX231W/EX231Wp)

by change attachment foot.

CAUTION: Do not use this stand for EX201W with attachment foot for

EX231W/EX231Wp. It may cause monitor fall down and make serious

damage to the monitor.

For EX201W user: Proceed to step 3.

For EX231W or EX231Wp user: Change attachment foot following the below

instruction.

1 Press Quick Release Button and pull out the attachment foot.A

2 Attach the attachment foot with "23 only".

3 1) Turn off the power to the monitor.

2) Paste two rubber feet on the bottom of the monitor.B

3) Place monitor face down on a non-abrasive surface.

NOTE: Handle with care when placing monitor face down to avoid

damaging the front control keys.Put the upper hooks of the stand in the

slot of the monitor then push stand into monitor in direction of the arrow

as shown and conrm that the stand is locked. Open the stand with

widely extended until feeling a "click" feeling.

To reattach the stand, please refer to monitor's user's manual.

Before using:

Use this stand with widely extended until feeling a "click" feeling.

CAUTION: Improper setting may cause the monitor fall down and make serious damage to the monitor.

Human Sensor position is below as normal stand. Please make sure there is no object in front of Human Sensor.

Be sure to observe the cautions described in the monitor's operating manual when handling the monitor.

For EX201W

For EX231W / EX231Wp

Einheit: mm

Gewicht: ??

Gewicht: ??

Español

日本語

Italiano

简体中文

Installing stand:

You use this stand for both size 20" (EX201W) and 23" (EX231W/EX231Wp)

by change attachment foot.

CAUTION: Do not use this stand for EX201W with attachment foot for

EX231W/EX231Wp. It may cause monitor fall down and make serious

damage to the monitor.

For EX201W user: Proceed to step 3.

For EX231W or EX231Wp user: Change attachment foot following the below

instruction.

1 Press Quick Release Button and pull out the attachment foot.A

2 Attach the attachment foot with "23 only".

3 1) Turn off the power to the monitor.

2) Paste two rubber feet on the bottom of the monitor.B

3) Place monitor face down on a non-abrasive surface.

NOTE: Handle with care when placing monitor face down to avoid

damaging the front control keys.Put the upper hooks of the stand in the

slot of the monitor then push stand into monitor in direction of the arrow

as shown and conrm that the stand is locked. Open the stand with

widely extended until feeling a "click" feeling.

To reattach the stand, please refer to monitor's user's manual.

Before using:

Use this stand with widely extended until feeling a "click" feeling.

CAUTION: Improper setting may cause the monitor fall down and make serious damage to the monitor.

Human Sensor position is below as normal stand. Please make sure there is no object in front of Human Sensor.

Be sure to observe the cautions described in the monitor's operating manual when handling the monitor.

For EX201W

For EX231W / EX231Wp

Unidad: mm

Peso: ??

Peso: ??

For EX201W For EX231W / EX231Wp

Installing stand:

You use this stand for both size 20" (EX201W) and 23" (EX231W/EX231Wp)

by change attachment foot.

CAUTION: Do not use this stand for EX201W with attachment foot for

EX231W/EX231Wp. It may cause monitor fall down and make serious

damage to the monitor.

For EX201W user: Proceed to step 3.

For EX231W or EX231Wp user: Change attachment foot following the below

instruction.

1 Press Quick Release Button and pull out the attachment foot.A

2 Attach the attachment foot with "23 only".

3 1) Turn off the power to the monitor.

2) Paste two rubber feet on the bottom of the monitor.B

3) Place monitor face down on a non-abrasive surface.

NOTE: Handle with care when placing monitor face down to avoid

damaging the front control keys.Put the upper hooks of the stand in the

slot of the monitor then push stand into monitor in direction of the arrow

as shown and conrm that the stand is locked. Open the stand with

widely extended until feeling a "click" feeling.

To reattach the stand, please refer to monitor's user's manual.

Before using:

Use this stand with widely extended until feeling a "click" feeling.

CAUTION: Improper setting may cause the monitor fall down and make serious damage to the monitor.

Human Sensor position is below as normal stand. Please make sure there is no object in front of Human Sensor.

Be sure to observe the cautions described in the monitor's operating manual when handling the monitor.

For EX201W

For EX231W / EX231Wp

Unità: mm

Peso: ??

Peso: ??

Installing stand:

You use this stand for both size 20" (EX201W) and 23" (EX231W/EX231Wp)

by change attachment foot.

CAUTION: Do not use this stand for EX201W with attachment foot for

EX231W/EX231Wp. It may cause monitor fall down and make serious

damage to the monitor.

For EX201W user: Proceed to step 3.

For EX231W or EX231Wp user: Change attachment foot following the below

instruction.

1 Press Quick Release Button and pull out the attachment foot.A

2 Attach the attachment foot with "23 only".

3 1) Turn off the power to the monitor.

2) Paste two rubber feet on the bottom of the monitor.B

3) Place monitor face down on a non-abrasive surface.

NOTE: Handle with care when placing monitor face down to avoid

damaging the front control keys.Put the upper hooks of the stand in the

slot of the monitor then push stand into monitor in direction of the arrow

as shown and conrm that the stand is locked. Open the stand with

widely extended until feeling a "click" feeling.

To reattach the stand, please refer to monitor's user's manual.

Before using:

Use this stand with widely extended until feeling a "click" feeling.

CAUTION: Improper setting may cause the monitor fall down and make serious damage to the monitor.

Human Sensor position is below as normal stand. Please make sure there is no object in front of Human Sensor.

Be sure to observe the cautions described in the monitor's operating manual when handling the monitor.

For EX201W

For EX231W / EX231Wp

单位 : mm

重量 : ??

重量 : ??

Weight: ?? Weight: ??

単位 : mm

Specyfikacje produktu

Marka:	NEC
Kategoria:	Wsparcie dla płaskich paneli
Model:	ST-EX2023

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z NEC ST-EX2023, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Wsparcie dla płaskich paneli NEC

NEC PDVWXUN 55 P Instrukcja

15 Października 2024

NEC PD01CMB Instrukcja

2 Października 2024

NEC ST-EX2023 Instrukcja

15 Września 2024

NEC 40000678 Instrukcja

15 Września 2024

NEC PD01CMS Instrukcja

8 Września 2024

NEC 100013263 Instrukcja

3 Września 2024

NEC 40000679 Instrukcja

3 Września 2024

NEC W32-70 Instrukcja

21 Sierpnia 2024

NEC 40000674 Instrukcja

14 Sierpnia 2024

NEC 40000675 Instrukcja

8 Sierpnia 2024

Instrukcje Wsparcie dla płaskich paneli

Najnowsze instrukcje dla Wsparcie dla płaskich paneli

Insignia NS-STV3N1705 Instrukcja

15 Października 2024

One For All DM 4110 Instrukcja

9 Października 2024

One For All DM 7220 Instrukcja

9 Października 2024

One For All DM 2220 Instrukcja

9 Października 2024

Kogan KASMM39S12A Instrukcja

9 Października 2024

Kogan KATWM70TLMA Instrukcja

9 Października 2024

Kogan KADMM46G24A Instrukcja

9 Października 2024

Kogan KADMMPCGASC Instrukcja

9 Października 2024

One For All DM 2210 Instrukcja

9 Października 2024

One For All DM 7210 Instrukcja

9 Października 2024