Instrukcja obsługi NEC PD01CMS

NEC Wsparcie dla płaskich paneli PD01CMS

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla NEC PD01CMS (12 stron) w kategorii Wsparcie dla płaskich paneli. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/12
I N S T A L L A T I O N I N S T R U C T I O N S
MCM1U LCM1U
(Shown installed to
1-1/2" NPT column as example only)
(Shown installed to
CPA Series extension column
as example only)
Single Flat Panel Ceiling Mounts
Spanish Product Description
German Product Description
Portuguese Product Description
Italian Product Description
Dutch Product Description
French Product Description
MCM1U / LCM1U / MCM1US / LCM1US
MCM1U / LCM1U / MCM1US / LCM1US Installation Instructions
2
DISCLAIMER
Milestone AV Technologies and its affiliated corporations and
subsidiaries (collectively "Milestone"), intend to make this
manual accurate and complete. However, Milestone makes no
claim that the information contained herein covers all details,
conditions or variations, nor does it provide for every possible
contingency in connection with the installation or use of this
product. The information contained in this document is subject
to change without notice or obligation of any kind. Milestone
makes no representation of warranty, expressed or implied,
regarding the information contained herein. Milestone assumes
no responsibility for accuracy, completeness or sufficiency of
the information contained in this document.
Chief® is a registered trademark of Milestone AV Technologies.
All rights reserved.
IMPORTANT SAFETY INSTRUCTIONS
WARNING: A WARNING alerts you to the possibility of
serious injury or death if you do not follow the instructions.
CAUTION: A CAUTION alerts you to the possibility of
damage or destruction of equipment if you do not follow the
corresponding instructions.
WARNING: Failure to read, thoroughly understand, and
follow all instructions can result in serious personal injury,
damage to equipment, or voiding of factory warranty! It is the
installer’s responsibility to make sure all components are
properly assembled and installed using the instructions
provided.
WARNING: Failure to provide adequate structural strength
for this component can result in serious personal injury or
damage to equipment! It is the installer’s responsibility to
make sure the structure to which this component is attached
can support five times the combined weight of all equipment.
Reinforce the structure as required before installing the
component.
WARNING: Exceeding the weight capacity can result in
serious personal injury or damage to equipment! It is the
installer’s responsibility to make sure the combined weight of
all components located between the mount up to (and
including) the display does not exceed 125 lbs (56.7 kg).
WARNING: Use this mounting system only for its intended
use as described in these instructions. Do not use
attachments not recommended by the manufacturer.
WARNING: Never operate this mounting system if it is
damaged. Return the mounting system to a service center for
examination and repair.
WARNING: Do not use this product outdoors.
IMPORTANT ! : The MCM1U/LCM1U and MCM1US/
LCM1US mounts are designed to be mounted to a 1-1/2"
NPT or NPSM following ANSI/ASME B1.20.1 (Schedule
40, 0.154" minimum thickness aluminum-ASTM B221)
threaded extension column (not included);
OR
a UL
Listed Chief CPA Series extension column (not included).
--SAVE THESE INSTRUCTIONS--
Installation Instructions MCM1U / LCM1U / MCM1US / LCM1US
3
DIMENSIONS
460.4
MAX MOUNTING PATTERN
7.87"
[200 ]
MIN MOUNTING PATTERN
5.56
141.3
PATTERN
MAX MOUNTING
15.75
400.0
528.8
20.82
18.13
5.38
136.5
20°
4.75
120.7
0.50
12.7
161.7
6.37
5.22
132.6
7.94
201.6
16.50
419.1
3.95
100.2
MCM1U/MCM1US
15.75
5.38
MIN MOUNTING PATTERN
[200]
7.87
MAX MOUNTING PATTER
616.0
PATTERN
MAX MOUNTING
400.0
141.3
5.56
24.25
26.81
681.0
100.2
3.95
16.50
419.1
7.94
201.6
12.7
0.50
161.7
6.37
4.25
108.0
5.22
132.6
20°
LCM1U/LCM1US

Specyfikacje produktu

Marka: NEC
Kategoria: Wsparcie dla płaskich paneli
Model: PD01CMS

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z NEC PD01CMS, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Wsparcie dla płaskich paneli NEC

NEC

NEC PDVWXUN 55 P Instrukcja

15 Października 2024
NEC

NEC PD01CMB Instrukcja

2 Października 2024
NEC

NEC ST-EX2023 Instrukcja

15 Września 2024
NEC

NEC 40000678 Instrukcja

15 Września 2024
NEC

NEC PD01CMS Instrukcja

8 Września 2024
NEC

NEC W32-70 Instrukcja

21 Sierpnia 2024
NEC

NEC 40000674 Instrukcja

14 Sierpnia 2024
NEC

NEC 40000675 Instrukcja

8 Sierpnia 2024
NEC

NEC 40000673 Instrukcja

5 Lipca 2024
NEC

NEC PDWXS 46-55 P Instrukcja

4 Lipca 2024

Instrukcje Wsparcie dla płaskich paneli

Najnowsze instrukcje dla Wsparcie dla płaskich paneli

Insignia

Insignia NS-STV3N1705 Instrukcja

15 Października 2024
One For All

One For All DM 4110 Instrukcja

9 Października 2024
One For All

One For All DM 7220 Instrukcja

9 Października 2024
One For All

One For All DM 2220 Instrukcja

9 Października 2024
Kogan

Kogan KASMM39S12A Instrukcja

9 Października 2024
Kogan

Kogan KATWM70TLMA Instrukcja

9 Października 2024
Kogan

Kogan KADMM46G24A Instrukcja

9 Października 2024
Kogan

Kogan KADMMPCGASC Instrukcja

9 Października 2024
One For All

One For All DM 2210 Instrukcja

9 Października 2024
One For All

One For All DM 7210 Instrukcja

9 Października 2024