Instrukcja obsługi NACON GC-100

NACON Kontroler GC-100

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla NACON GC-100 (29 stron) w kategorii Kontroler. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/29
BB5022 - PCGC-100XF
PC CONTRO LLER
Fabriqué en Chine / Made in China 11.06.20
NACON, 396 - 466 Rue de la Voyette
CRT2 5 9273 FRETIN, FRANCE
User gUide
NACON is a registered trademark.
EN /
NACON™ GC-100XF gaming controller for PC.
Thank you for purchasing this NACON product. In case of a malfunction
please refer to the support information at the end of this manual. We highly
appreciate any feedback which helps us to improve our products. Please
keep this instruction manual for future reference.
I Guarantee
This product bearing the NACON trademark, is guaranteed by the manufacturer for a period
of 2 years from the date of purchase, and will, during this period be replaced with the same
or a similar model, at our option, free of charge, if there is a defect due to faulty material, or
workmanship.
For any warranty request or claim, please keep your proof of purchase for the duration of
the warranty. Without this document, we won't be able to process your request. The original
packaging must be kept for all distance purchases (mail order & Internet).
This guarantee does not cover defects arising from accidental damage, misuse or wear and
tear. This does not affect your statutory rights.
To access the declaration of conformity, please visit:
www.nacongaming.com/my-nacon/support
I Productspecications
Gaming controller for Windows PCs
2 analogue sticks, 4 buttons, 2 triggers, 2 shoulder buttons, digital pad, BACK, START &
MODE button
Switchable DirectInput8 and XInput mode for 100% compatibility with all PC games
Soft touch treatment and rubber inlays for perfect grip
2 vibration motors
Compatible with Windows Vista®/7/8/10
I Contents of the package
NACON GC-100XF gaming controller
Instruction manual
I Control elements
1. Left analogue stick
2. Right analogue stick
3. D-Pad
4. Action buttons 1-4
5. Left trigger and shoulder button
6. Right trigger and shoulder button
7. BACK button
8. START button
9. MODE button
10. D/X switch
EN /
I First-time connection with the PC
The NACON GC-100XF is a so-called Plug´n´Play device. This means that the necessary driver
software should be installed automatically if you connect it to your computer for the rst time.
Here are the steps in detail:
• Turn on your computer, wait for it to boot and log in to your Windows desktop.
Look for an unused USB slot on your PC and plug in the USB cable of your NACON GC-100XF
controller.
• Windows will detect the new device and after a few seconds it will start the installation process
for the appropriate drivers. This is shown by a small icon in the taskbar.
The installation might take a while depending on the speed of your system. Once the installation
is complete, you will be presented with the according message. You can now use your GC-100XF.
I D/X button
There are diff erent ways for modern computer games to communicate with your controller
and vice versa. Your GC-100XF supports the two most commonly used ones: DirectInput8
and XInput.
Sometimes a game only supports one of these two protocols. Since both can´t be run
simultaneously, your GC-100XF features the D/X button (10) to switch between these two
protocols, to make sure it works with all games.
The blue LED’s around the MODE button (9) indicate the current status:
• All LED’s lit (full circle) indicates XInput to be used
• Partially lit LED’s indicate that the DirectInput8 protocol is active
Remark: After changing the protocol, the controller needs some short time to switch, indicated by the lights
turning off. Once lit again, it´s fully functional with the selected protocol.
1
7 8
5 6
4
2
9
3
10


Specyfikacje produktu

Marka: NACON
Kategoria: Kontroler
Model: GC-100

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z NACON GC-100, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Kontroler NACON

Instrukcje Kontroler

Najnowsze instrukcje dla Kontroler

Razer

Razer Wolverine V3 Pro Instrukcja

9 Października 2024
Krom

Krom Kumite Instrukcja

9 Października 2024
Krom

Krom Kenzo Instrukcja

9 Października 2024
Canon

Canon imagePRESS V700 Instrukcja

8 Października 2024
Valcom

Valcom V-1094A Instrukcja

8 Października 2024
Valcom

Valcom V-2994 Instrukcja

8 Października 2024