Instrukcja obsługi Music Hall PA1.2

Music Hall odbiornik PA1.2

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Music Hall PA1.2 (8 stron) w kategorii odbiornik. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/8

music hall

pa1.2

INSTRUCTION MANUAL

music hall

http://www.musichallaudio.com

may 2008

CONGRATULATIONS ON YOUR PURCHASE

You have selected an exceptional phono preamplifier. Each component used in

the construction of the pa1.2 was selected to provide you with superior

performance and the highest level of sound reproduction available today. We

know of no phono preamplifier that costs as much to produce yet sells for so little.

The precise and elegant design of this phono preamplifier makes it easy to install

and operate. Please take a few moments to read over the operating instructions

to ensure that you get the best performance from your preamplifier and years of

trouble-free service.

SAFETY GUIDELINES

This product is designed and manufactured to strict quality and safety standards.

However, you should be aware of the following installation and operation

precautions:

1. Take heed of warnings and instructions

Read all the instructions before connecting or operating the preamplifier.

Keep this manual so you can refer to these safety instructions.

2. Water and Moisture

To reduce the risk of fire or electric shock, do not expose the phono preamplifier

to moisture or water. If the phono preamplifier is exposed to moisture,

immediately disconnect the power cord from the wall. Take the preamplifier to an

authorized Music Hall service center for inspection. Do not touch the phono

preamplifier, power cord, or plug with wet hands.

3. Object or liquid entry

Do not allow foreign objects or liquids into the unit. If this happens, immediately

disconnect the power cord from the wall and take the unit to an authorized music

hall service center for inspection.

4. Heat

Keep the phono preamplifier away from naked flames, radiators, heat registers,

stoves, or any other heat-producing appliances (including amplifiers).

5. Climate

The phono preamplifier has been designed for use in moderate climates. Do not

attempt to use below 41 degrees Fahrenheit (5 degrees Celsius) or above 95

degrees Fahrenheit (35 degrees Celsius).

6. Racks and Stands

Place the phono preamplifier on a fixed, level surface strong enough to support its

weight. Do not place it on a moveable cart that could tip over. We recommend

only using stands approved for use with audio equipment.

7. Cleaning

A soft towel can be used.

8. Power Sources

Connect the phono preamplifier only to a power supply of the type and voltage

described in the operating instructions or specified on the rear panel of the unit.

9. Power-cord protection

Connect the phono preamplifier to the power outlet only with the supplied power

supply. Do not modify the supplied power supply in any way. Do not attempt to

defeat grounding and/or polarization provisions.

Do not use extension cords.

Do not route the power cord where it will be crushed, pinched, bent at severe

angles, exposed to heat, or damaged in any way.

10. Non-use periods

If the preamplifier is to be left unused for a long period of time, the power supply

should be unplugged from the wall outlet.

11. Damage Requiring Service

Stop using the phono preamplifier immediately and have it inspected by an

authorized Music Hall service center whenever:

1. The power supply cord or plug has been damaged.

2. The phono preamplifier has been exposed to rain.

3. The phono preamplifier does not operate properly.

4. The phono preamplifier has been dropped or damaged.

5. Smoke or any unusual smell is detected from the phono preamplifier.

Specyfikacje produktu

Marka:	Music Hall
Kategoria:	odbiornik
Model:	PA1.2
Kolor produktu:	Czarny
Wysokość produktu:	52 mm
Szerokość produktu:	107 mm
Głębokość produktu:	152 mm
Waga produktu:	500 g
Certyfikat środowiskowy (zrównoważonego rozwoju):	RoHS
Technologia łączności:	Przewodowa
Certyfikaty:	RoHS, CE
Przeznaczenie:	Dom
Zakres temperatur (eksploatacja):	5 - 35 °C
Kanały wyjścia audio:	2.0 kan.
Diody LED:	Tak
Maksymalne natężenie prądu:	0.3 A
Moc szczytowa na kanał:	- W
Współczynnik zawartości harmonicznych:	0.01 %
Stosunek sygnału do szumu:	86 dB
Materiały:	Aluminium
Zasięg częstotliwości:	20 - 20000 Hz
Poziom wyjścia:	300 mV
Impedancja wejściowa:	47000 Ω