Instrukcja obsługi Muse M-158 IPW

Muse głośnik M-158 IPW

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Muse M-158 IPW (2 stron) w kategorii głośnik. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/2

In standby mode, press (9/R13) or (10/R14) button, alarm type ALARM 1 ALARM 2

will ash on display. Press (11/R9) or (12/R10) button to select to wake up

by buzzer, iPod/iPhone/iPad, or radio. The icon “ ”/“ ”, “ ”/” ” or “ ”/ “

” will show on display accordingly.

- “ ” or “ ” : “Beep“ sound comes when the alarm time is (wake up by buzzer)

reached.

- “ ” or ” ” : Follow the procedure in “(wake up by iPod/iPone/iPad) PLAY

YOUR DOCKABLE iPod/iPhone/iPad”. The iPod/iPhone/iPad will start playing au-

tomatically when the alarm time is reached and the unit is off.

- “ ” or “ ” : Follow the procedure in “ (wake up by radio) LISTENING TO THE

RADIO” to select your desired radio station. The radio will turn on automatically when

the alarm time is reached and the unit is off.

Press (9/R13) or (10/R14) button again, the hour digit ashes ALARM 1 ALARM 2

on display. Press the (11/R9) or (12/R10) button to adjust the hour.

Press (9/R13) or (10/R14) button again, the minute digit ashes ALARM 1 ALARM 2

on display. Press the (11/R9) or (12/R10) button to adjust the minutes.

Press (9/R13) or (10/R14) to save the setting of alarm 1 or ALARM 1 ALARM 2

alarm 2. The display will resume to the current time.

This unit can be set for two different wake up times which you can choose to use inde-

pendently or simultaneously ALARM1, ALARM2 or both ALARM1 and ALARM 2.

Alarm 1 or Alarm 2 setting

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

button (STANDBY)

VOLUME+ / - buttons

EQ button (equalizer)

M button (memory/clock setting)

FUNCTION button

iPod/iPhone/iPad Socket

SNOOZE/DIMMER button

SLEEP Button

ALARM1/MEMO- button

ALARM2/MEMO+ button

TUNING/ button

button (play/pause)

LCD display

Remote sensor

Speakers

FM Wire Antenna

VIDEO OUT jack

AUX IN jack

DC input (AC adaptor jack)

Battery Backup Compartment

M-158 IP

GB - 1

User Manual

Docking for iPod/iPhone/iPad Clock Radio PLL

Please read the instruction carefully

before operating the unit.

English GB - 2

GB - 4

Main unit

Top View

BASIC OPERATION

Turn on the unit

The unit is in clock mode when it is plugged in, press STANDBY button (1/R1) to

turn on or turn off the unit.

Operating mode selection (FUNCTION)

Press button (5/R2) repeatedly to select iPod/iPhone/iPad, AUX or Radio FUNCTION

mode.

Sound volume

Press button (2/R12) to adjust sound level. There are a total of 32 volume lev-VOL +/-

els.

Press button (R3) to cut off the sound temporarily, press this button again to re-

sume the sound.

Equalizer

When listening to the radio, iPod/iPhone/iPad or other music source from AUX IN, press

the button (3) repeatedly to select different modes: CLASSIC, ROCK, POP, JAZZ, EQ

X-B (bass boost) or EQ off.

Display dimmer

In standby mode, press the button (7) repeatedly will change the SNOOZE/DIMMER

backlight brightness of the display. There are 3 levels: low, medium, and high.

Front View

Back View

5. Press button (5/R2) to complete time setting.M

NOTE: With clock display blinking, if no button is pressed within 8 seconds, it will return

to previous clock display.

SLEEP (Automatic turn off)

In sleep mode, the unit will turn off automatically after a specied time.

Note: Sleep time can only be set when the unit is turned ON.

You can select a duration in minutes before the unit turns off automatically. Press

SLEEP button (8/R15) repeatedly to select 90-80-70-60-50-40-30-20-10 or 00 minutes,

then release button (8/R15), “SLEEP” shows on display.SLEEP

NOTES:

- To turn off the unit before the SLEEP activates, press STANDBY button (1/R1), or

press button (8/R15) repeatedly until value is adjusted to “00”. It will return to SLEEP

normal display after 5 seconds, the sleep function will be cancelled and “SLEEP” icon

will not be displayed.

- If the playing time from your iPhone or other player is shorter than the selected sleep

time, the music will stop at the end of the playing time.

GB - 3 GB - 5

When you unpack your new iPod/iPhone/iPad clock-radio, make sure that you have

removed all the accessories and information papers:

- Docking Clock Radio PLL for iPod/iPhone/iPad

- Remote Control

- AC adaptor

- 6 pieces iPod/iPhone/iPad interchangeable adaptors

- 1 piece Dust Cover

- iPad table bracket

- User manual

UNPACKING YOUR UNIT

PRODUCT DESCRIPTION

Battery backup system

DC power: 2x1.5V, battery type AAA/R03/UM4(not provided) for clock and alarm time

backup system.

An alkaline type battery is recommended. For optimum performance, this battery should

be replaced every 6 months.

BACKUP SYSTEM: All clock settings will be kept in memory; however, the clock time

may require adjustment for exact accuracy. If the backup battery is not installed, the

display will show the clock ashing to indicate that you have to reset the time and the

alarm.

NOTE: When the battery backup is functioning, the display has no backlight.

Remote control

R1. STANDBY button

R2. button FUNCTION

R3. button (mute)

R4. button (play/pause)

R5. button (return to previous menu in MENU

iPhone/iPod mode)

R6. button (navigate menu in iPod/iPhone/iPad

mode)

R7. button (navigate menu in iPod/iPhone/iPad

mode)

R8. button (conrm a selection in iPod/ENTER

iPhone/iPad mode)

R9. button (fast backward)

R10. button (fast forward)

R11. button (memory/clock setting)M/Clock

R12. + / - buttons VOLUME

R13. - button (alarm 1)ALM.1/MEMO

R14. ALM.2/MEMO+ button (alarm 2)

R15. button SLEEP

R16. button (snooze)SNZ

- Remove the spacer tab before use

Remove the spacer tab when you use the remote control for

the rst time.

To remove the tab, pull it in the direction of the arrow in the il-

lustration as shown.

- Replacing battery for the remote control

1. Press the stopper and pull out the battery holder.

2. Install 1pc “CR2025” lithium battery according to the polarity diagram on the battery

compartment.

3. Insert the battery holder into the remote control.

TIME SETTING

Current time

When used for the rst time, or if the mains plug has been removed with no backup bat-

tery inside, the clock display will blink.

1. In Standby mode, Press the button (4/R11) on the unit, the clock blinks on the dis-M

play.

2. With clock display blinking, press button (5/R2) to select 12 or 24 hour FUNCTION

format.

3. Press the button (4/R11), the hour digits will ash, set the hour with (11/R9) or M

(12/R10) button.

4. Press the button (4/R11) to save the hour setting, the minute digits ash Set the M

minutes with (11/R9) or (12/R10) button.

ALARM SETTING

D1. - Alarm #1 wake to buzzer

- Alarm #2 wake to buzzer

- Alarm #1 wake to iPod/iPhone/iPad

- Alarm #2 wake to iPod/iPhone/iPad

- Alarm #1 wake to radio

- Alarm #2 wake to radio

D2. -iPod/iPhone/iPad mode playback

D3. - Radio mode

D4. - AUX IN mode

D5. Equalizer modes

D6. Volume

D7. - mute

D8. SNOOZE

D9. SLEEP

D10. Memory

D11.Time or radiofrequency display

D12. FM Stereo

D13. Radio frequency unit

D14. “PM”-12hr time mode display

POWER SUPPLY

Using the AC adaptor

This AC adaptor operates on AC100-240V~50/60Hz.

• The supplied AC adaptor is suitable for use on AC mains supplies of 100-240V~50/

60Hz and should only be connected to a mains supply within these parameters.

• Use the supplied AC adaptor only. Using any other AC adaptor could damage the unit.

Cautions:

- The included AC adaptor is for use with this unit only. Do not use it with other equip

ments.

- When the unit is not going to be used for long time, disconnect the AC adaptor from

the AC outlet.

- Be sure to use it near the wall outlet. If a malfunction occurs, disconnect the plug from

the wall outlet at once.

- When the AC adaptor is plugged in, the apparatus is not completely disconnected

from the main power source, even when the unit is turned off.

- AC adaptor is used as the disconnect device. It shall remain readily operable and

should not be obstructed during intended use. To disconnect the apparatus from sup

ply mains, completely disconnect the AC adaptor of the apparatus from the mains

socket outlet

To check the alarm settings

In standby mode, press (9/R13) or (10/R14) button. Time and ALARM 1 ALARM 2

alarm source of the corresponding alarm are displayed for 5 seconds.

iPod/iPhone/iPad not included

LCD DISPLAY

DS-2765B IB MUSE 001 REV0 GB.ind1 1 2011-6-29 14:26:05

IMPORTANT

The docking station in this system follows the Apple “Universal Dock” design. This sys-

tem can be tted to different iPod/iPhone/iPad model.

Play your iPod/iPhone/iPad on the main unit

1. Connect your iPod/iPhone/iPad to the socket of the unit.

2. Press the STANDBY button (1/R1) to turn on the unit.

3. Press the button (5/R2) repeatedly to select iPod/iPhone/iPad mode. The FUNTION

display indicates “iPhone”.

4. Press button (13/R4) to play or pause. Press and hold button (13/R4) for 5

seconds to enter the iPod/iPhone/iPad sleep mode.

5. Select the previous or next track by pressing (11/R9) or (12/R10) button,

press and hold (11/R9) or (12/R10) on the unit to review or fast forward.

6. Press buttons (2/R12) to adjust sound level.VOL + / -

* Buttons on remote conrol for iPod/iPhone/iPad playing

MENU button (R5): Press to: return to previous page of menu.

or button (R6 or R7): press to select a menu item.

ENTER button (R8): press to conrm a selection (open a folder or start playing a se-

lected track).

iPhone call pick up

1. When phone call coming in, the music from the docking iPhone will pause automati-

cally.

2. Incoming call ring comes out from the unit speaker.

3. You can take iPhone from the unit and pick up phone call.

4. After nish your call, connect back the iPhone to the socket, it will resume the play-

back of iPhone.

Charge your iPod/iPhone/iPad

While your iPod/iPhone/iPad is docked on the system, its battery recharges automati-

cally until fully charged.

GB - 9

• The apparatus should not be exposed to dripping or splashing.

• Ensure a minimum distance of 5cm around the apparatus for sufcient ventilation.

• Do not place objects lled with liquids, such as vases, on the apparatus.

• The rating plate is located on the bottom of unit.

• Attention should be drawn to the environmental aspects of battery disposal.

• Do not throw batteries in re!

• Battery shall not be exposed to excessive heat such as sunshine, re or the like.

• Excessive sound pressure from earphones and headphones can cause hearing loss.

• Under the inuence of electrical fast transient or/and electrostatic phenomenon, the

product may malfunction and require user to power reset.

Cleaning

Be sure to turn the unit off and disconnect the AC adaptor before maintaining the

unit.

- Use a soft, dry, clean cloth. Regularly dust the vents at the back or sides.

- Using solvents, abrasive or alcohol-based products risks damaging the appliance.

- If an object or liquid enters inside the appliance, unplug it immediately and have it

checked by an authorized engineer.

If at any time in the future you should need to dispose of this product please

note that Waste electrical products should not be disposed of with household

waste. Please recycle where facilities exist. Check with your Local Authority or

retailer for recycling advice.(Waste Electrical and Electronic Equipment Direc-

tive)

GB - 6

GB - 10

CONNECTIONS

AUXILIARY

This unit includes the jack (19) to allow you to connect external devices, such AUX IN

as MP3 player, and listen to the music of your external device through the speakers of

this unit.

1. Connect the external device to the jack (19) at the back of the unit. AUX IN

2. Press STANDBY button (1/R1) to turn on the unit.

3. Press button (5/R2) to select mode. The display indicates FUNCTION AUXILIARY

“AUX”

4. Start to play your auxiliary source.

5. Adjust the volume to desired level.

6. To stop playback, disconnect your external device from the jack.AUX IN

SPECIFICATIONS

GENERAL

Power source

Dimension

TUNER

Frequency range

AUDIO SECTION

Power Consumption

Speaker Impedance

SAFETY INSTRUCTION

ATTENTION: To reduce the risk of electric shock, do not remove the

cover or back. There are no user serviceable parts inside the unit.

Refer all servicing to qualied personnel.

The lightning ash with arrowhead symbol within the triangle is a warning sign

alerting the user of “dangerous voltage” inside the unit.

The exclamation point within the triangle is a warning sign alerting the user of im-

portant instructions accompanying the product.

WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS

APPLIANCE TO RAIN OR MOISTURE.

GB - 7 GB - 8

GB - 11

LISTEN TO THE RADIO

Manual operation

1. Press STANDBY button (1/R1) to turn on the unit.

2. Press FUNCTION button (5/R2) to select the RADIO mode. The display indicates “FM”

3. Press (11/R9) or (12/R10) to tune to a desired station.

Automatic search operation

Press and hold (11/R9) or (12/R10) button for approx. 2 seconds to start

searching in the chosen direction. The automatic searching operation locates strong

stations. Press again to stop searching. A station with a weak signal can be tuned man-

ually.

Note: During the search operation the sound level will be muted automatically.

Made for iPod, iPhone and iPad

“Made for iPod,” “Made for iPhone,” and “Made for iPad” mean that an electronic acces-

sory has been designed to connect specically to iPod, iPhone, or iPad, respectively,

and has been certied by the developer to meet Apple performance standards. Apple is

not responsible for the operation of this device or its compliance with safety and regula-

tory standards. Please note that the use of this accessory with iPod, iPhone, or iPad

may affect wireless performance.

iPhone and iPod are trademarks of Apple Inc., registered in the U.S. and other coun-

tries. iPad is a trademark of Apple Inc.

iPod/iPhone/iPad interchangeable adapter

This system includes 6 different adapters designed to allow you to securely connect

any “dockable” iPod/iPhone/iPad model to the docking station. Refer to the chart below

to select the proper adapter for your particular iPod/iPhone/iPad model and insert that

adapter into the docking station before connecting your iPod/iPhone/iPad.

NOTE: No adapter is provided for the 3G (third generation) iPod.

Please use that adapters that were included with these iPod/iPhone/iPad at time of pur-

chase. They will t properly into the docking station of this system.

We have also included one at adapter with no opening at all. This serves as a dust

cover that can be inserted in the docking station if no iPod/iPhone/iPad will be con-

nected to the system for an extended period of time.

LISTEN TO YOUR iPod/iPhone/iPad

Turning off Alarm

The alarm is programmed to run for 59 minutes and triggers progressively.

Once the alarm 1 or alarm 2 is activated, corresponding alarm indicator “ ” / “ ”,

“ ”/” ” or “ ” / “ ” will ash on display,

1. In wake up mode, to temporarily stop alarm, press the button (7/R16). The SNOOZE

alarm will resume to the previous playing mode after 9 minutes. “ ” / “ ”, “ ”/

” ” or “ ” / “ ” and “SNOOZE” are on display.

2. To stop the alarm for 24 hours, press button (1/R1), “ ” / “ ”, “ ”Standby

/” ” or “ ” / “ ” remains displayed. The alarm will trigger at the preset time one

day later.

3. To turn off the alarm permanently, in standby mode, press and hold (9/ALARM 1

R13) or (10/R14) until “ ” / “ ”, “ ”/” ” or “ ” / “ ” disappears.ALARM 2

NOTE:

- You can adjust the wake up sound level by VOLUME+/- button on wake to iPod/

iPhone/iPad or radio modes.

- But since this is a progressive alarm, the sound will be louder and louder. You could

decrease the volume after the alarm reaches to its max volume level (24).

Program preset stations

This unit is able to store 20 FM radio stations in memory.

1. Select a radio station either manually or by automatic search.

2. Press button (4/R11) once, “MEMO” will ash and “01” will appear on display. M

3. Press button (9/10) to select a preset channel. MEMO- / +

4. Press button (4/R11) again to save the radio station in the selected preset channel. M

5. Repeat steps 1-4 to store other stations.

When you memorize a station on a preset, the previous station is erased and replaced

by the new one.

Listening to the preset stations

Press (9/R13) or (10/R14) button directly to select a preset station. MEMO- MEMO+

NOTE: For a better reception in FM, extend the antenna. If a stereo broadcast is re-

ceived, is displayed. “((ST))”

VIDEO

You can view the video from the iPod/iPhone/iPd on a TV by connecting it to your unit

via the jack (18) at the back of unit. VIDEO OUT

Use the cable with yellow plug of an AV cable to connect the composite video output of

this unit to the video input of a TV/monitor.

AC 100-240V ~ 50/60Hz

DC 3V, 2x1.5V “AAA/R03/UM4” size batteries (not included) or

equivalent for memory backup

359(W) x 130 (H)x 130(D) mm

FM: 87.5 - 108 MHz

2X3.5W

8 ohms

IMPORTANT SAFETY INSTRUCTIONS

• Never use an AC adaptor that is damaged, route power lead in a safe manner and

make sure it is not subjected to trapping or pinching. If the power lead is damaged refer

to a qualied service agent.

• Place the unit on a at and even surface.

• Do not restrict the air ow of the unit by placing it in a place with poor air ow, by cov-

ering it with a cloth, or by placing it on carpeting.

• To avoid magnetized, do not place the unit near speaker or magnet.

• Do not use this unit in direct sunlight or leave the unit in a closed automobile (or yacht,

etc) where it would be exposed to high temperatures above 40°C.

• It also should not be placed in temperatures less than 5°C or greater than 35°C.

*Do not use the unit immediately after transportation from a cold place to a warm place,

condensation problem may result.

• The ventilation should not be impeded by covering the ventilation openings with items

such as newspapers, table-cloths, curtains, etc.

• No naked ame sources, such as lighted candles, should be placed on the apparatus.

• The use of apparatus in moderate climates.

MAINTENANCE

iPod/iPhone/iPad Model

iPad

iPod/iPhone/iPad Model

DS-2765B IB MUSE 001 REV0 GB.ind2 2 2011-6-29 14:26:15

Specyfikacje produktu

Marka:	Muse
Kategoria:	głośnik
Model:	M-158 IPW
Kolor produktu:	Biały
Rodzaj zasilania:	AC, Battery
Częstotliwość wejściowa AC:	50 Hz
Napięcie wejściowe AC:	230 V
W zestawie pilot zdalnego sterowania:	Tak
Podręcznik użytkownika:	Tak
Bluetooth:	Nie
Moc wyjściowa (RMS):	7 W
Gniazdko wyjścia DC:	Tak
Zasilacz sieciowy:	Tak
Typ ekranu:	LCD
Skrócona instrukcja obsługi:	Tak
Przewody:	AUX
Kanały wyjścia audio:	2.0 kan.
Zakresy tunera:	FM
Ilość stacji:	20
Rodzaj baterii:	AAA/R03/UM4
Rodzaj opakowania:	Pudełko
Liczba baterii:	2
Baterie w zestawie:	Nie
Wymiary produktu (SxGxW):	130 x 359 x 130 mm
Waga paczki:	1.8 kg
Waga netto:	1000 g
Wymiary opakowania (SxGxW):	172 x 402 x 212 mm
Liczba dołączonych produktów:	1 szt.
Wejście AUX:	Tak
Kompatybilność dokowania produktów Apple:	iPad, iPhone, iPod
Zasięg częstotliwości:	- Hz
Radio FM:	Tak
Ustawienia korektora:	Tak
Wyłącznik czasowy:	Tak
Funkcja wstrzymania:	Tak
Tryby korekcji:	Classic, Jazz, Pop, Rock
Liczba wyrównywaczy pasm:	5
Bass reflex:	Tak
Wbudowana ładowarka:	Tak
Moc głośnika:	3.5 W
Wyświetlacz zegara/daty:	Tak