Instrukcja obsługi Moxa AWK-3131-M12-EU

Moxa Wzmacniacz sygnału WiFi AWK-3131-M12-EU

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Moxa AWK-3131-M12-EU (16 stron) w kategorii Wzmacniacz sygnału WiFi. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/16
11 . A20 Moxa Inc ll rights reserved.
P/N: 1802031310010
AWK- 3131
Hardware Installation Guide
Moxa AirWorks
First Edition, February 2011
- - 2
Overview
Moxa's new AWK- -3131 3 in-1 industrial wireless AP/bridge/client meets
the growing need for faster data transmission speeds and wider coverage
by supporting IEEE 802.11n technology with a net data rate of up to 300
Mbps. The AWK-3131 combines two adjacent 20 MHz channels into a
single 40 MHz channel to deliver a potent combination of greater
reliability and more bandwidth. The two redundant DC power inputs
increase the reliability of the power supply, and the AWK-3131 can be
powered via PoE to make deployment easier. The AWK-3131 can operate
on either the 2.4 or 5 GHz bands and is backward-compatible with
existing 802.11a/b/g deployments to future-proof your wireless
investments.
Package Checklist
M -313oxa’s AWK 1 is shipped with the following items. If any of these
items is missing or damaged, please contact your customer service
representative for assistance.
AWK- 3131
2 dual- - - band omni directional antennas (2dBi, RP SMA, 2.4/5 GHz)
Cable holder with one screw
3 protective caps
DIN- rail kit
Documentation and software CD
Quick installation guide (printed)
Warranty card
Recommended SFP Accessories
SFP- 1G series
SFP- 1GSXLC:
Small form factor pluggable transceiver with 1000BaseSX, LC, 0.5 km,
0 to 60°C
SFP- - 1GSXLC T:
Small form factor pluggable transceiver with 1000BaseSX, LC, 0.5 km,
- 20 to 75°C
SFP- 1GLSXLC:
Small form factor pluggable transceiver with 1000BaseLSX, LC, 2 km,
0 to 60°C
SFP- - 1GLSXLC T:
Small form factor pluggable transceiver with 1000BaseLSX, LC, 2 km,
- 40 to 85°C
SFP- 1GLXLC:
Small form factor pluggable transceiver with 1000BaseLX, LC, 10 km,
0 to 60°C
SFP- - 1GLXLC T:
Small form factor pluggable transceiver with 1000BaseLX, LC, 10 km,
- 40 to 85°C
SFP- 1GLHLC:
Small form factor pluggable transceiver with 1000BaseLH, LC, 30 km,
0 to 60°C
SFP- - 1GLHLC T:
Small form factor pluggable transceiver with 1000BaseLH, LC, 30 km,
- 40 to 85°C
- - 3
SFP- 1GLHXLC:
Small form factor pluggable transceiver with 1000BaseLHX, LC, 40
km, 0 to 60°C
SFP- - 1GLHXLC T:
Small form factor pluggable transceiver with 1000BaseLHX, LC, 40
km, -40 to 85°C
SFP- 1GZXLC:
Small form factor pluggable transceiver with 1000BaseZX, LC, 80 km,
0 to 60°C
SFP- - 1GZXLC T:
Small form factor pluggable transceiver with 1000BaseZX, LC, 80 km,
- 40 to 85°C
SFP- 1GEZXLC:
Small form factor pluggable transceiver with 1000BaseEZX, LC, 110
km, 0 to 60°C
SFP- - 1GEZXLC 120:
Small form factor pluggable transceiver with 1000BaseEZX, LC, 120
km, 0 to 60°C
Installation and Configuration
Before installing the AWK- 331 1, make sure that all items in the Package
Checklist are in the box. In addition, you will need access to a notebook
computer or PC equipped with an Ethernet port. The AWK- 331 1 has a
default IP address that you must use when connecting to the device for
the first time.
Step 1: Select the power source
The AWK- 331 1 can be powered by a DC power input or PoE (Power over
Ethernet). The AWK- 3 31 1 will use whichever power source you choose.
Step 2: Connect the AWK 1 to a notebook or PC- 331
Since - 3 - -the AWK 31 1 supports MDI/MDI X auto sensing, you can use
either a straight-through cable or crossover cable to connect the
AWK- 331 1 to a computer. If the LAN LED indicator on the AWK- 331 1 port
lights up, it means the connection is established.
Step 3: Set up the computer’s IP address
Set an IP address on the same subnet as the AWK 1. Since - 331 the
AWK- 331 1’s default IP address is 192.168.127.253, and the subnet mask
is 255.255.255.0, you should set the IP address of the computer to
192.168.127.xxx 55.255.255.0 and subnet mask to 2 .
Step 4: Use the web-based manager to configure
AWK- 31 31
Open your computer’s web browser and then type
http://192.168.127.253 in the address field to access the homepage
of the web-based management. Before the homepage opens, you will
need to enter the user name and password. For first-time configuration,
enter the default user name and password and then click on the Login
button:
User name: admin
Password: root

Specyfikacje produktu

Marka: Moxa
Kategoria: Wzmacniacz sygnału WiFi
Model: AWK-3131-M12-EU

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Moxa AWK-3131-M12-EU, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Wzmacniacz sygnału WiFi Moxa

Instrukcje Wzmacniacz sygnału WiFi

Najnowsze instrukcje dla Wzmacniacz sygnału WiFi

Planet

Planet WNAP-1110 Instrukcja

10 Października 2024
Netgear

Netgear WN2000RPTv2 Instrukcja

10 Października 2024
Xiaomi

Xiaomi RA75 Instrukcja

9 Października 2024
Cudy

Cudy RE3000 Instrukcja

8 Października 2024
Cudy

Cudy RE1200 Instrukcja

8 Października 2024
Netgear

Netgear EX6170 Instrukcja

8 Października 2024
Extron

Extron FOX 3G HD-SDI SM Instrukcja

8 Października 2024
Extron

Extron FOXBOX Rx VGA MM Instrukcja

8 Października 2024