Instrukcja obsługi Mordaunt Short Mordaunt-Short MS907W

Mordaunt Short subwoofer Mordaunt-Short MS907W

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Mordaunt Short Mordaunt-Short MS907W (12 stron) w kategorii subwoofer. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/12
MS907W Subwoofer
Owners' Manual
Downloaded from www.Manualslib.com manuals search engine
Introduction..........................................................
Safety Precautions..............................................
Subwoofer Controls............................................
Attaching Feet to Your Subwoofer.....................
Running In............................................................
Connecting Your Subwoofer..............................
Positioning Your Subwoofer..............................
Taking Care of Your Subwoofer.........................
Technical Specifications.....................................
Warranty Information..........................................
2
3
6
8
8
8
9
9
10
11
.
Congratulations on purchasing this Mordaunt-
Short subwoofer. To ensure optimum
performance please read and retain this manual,
then sit back, relax and enjoy!
Please read and retain this manual, it contains useful
information that will ensure you get the very best from
your new loudspeakers.
Note:
This model is supplied in two mains voltage ratings.
Please refer to product rear panel for rating.
Contents
Introduction
2
Downloaded from www.Manualslib.com manuals search engine
For safety reasons please read the following instructions and the enclosed
Important Safety Information carefully before attempting to connect your
subwoofer unit to the mains.
Use of controls or adjustments or performance of procedures other than
those specified may result in hazardous radiation exposure.
The lightning flash with the arrowhead symbol within an
equilateral triangle is intended to alert the user to the presence
of uninsulated ‘dangerous voltage’ within the product’s
enclosure that may be of sufficient magnitude to constitute a
risk of electric shock to persons.
The exclamation point within an equilateral triangle is intend
ed to alert the user to the presence of important operating and
maintenance (servicing) instructions in the literature
accompanying the appliance.
This product complies with European Low Voltage
(73/23/EEC) and Electromagnetic Compatibility
(89/336/EEC) Directives when used according to this
instruction manual.
Warning
To reduce the risk of fire or electric shock, do not expose this appliance to
rain or moisture.
Caution
Caution
To reduce the risk of electric shock, do not remove cover (or back). There
are no user-serviceable parts inside. Please refer all servicing to a
qualified engineer.
Plug Fitting Instructions (UK only)
The cord supplied with this appliance is factory fitted with a 13A mains plug
fitted with a 3A fuse inside. If it is necessary to change the fuse, it is
important that a 3A one is used. If the plug needs to be changed because it
is not suitable for your socket, or becomes damaged, it should be cut off
and an appropriate plug fitted following the wiring instructions below. The
plug must then be disposed of safely, as insertion into a 13A socket is likely
to cause an electrical hazard. Should it be necessary to fit a 3-pin BS
mains plug to the power cord the wires should be fitted as shown in this
diagram. The colours of the wires in the mains lead of this appliance may
not correspond with the coloured markings identifying the terminals in your
plug. Connect them as follows:-
• The wire which is coloured BLUE must be
connected to the terminal which is marked
with the letter ‘N’ or coloured BLACK.
• The wire which is coloured BROWN must be
connected to the terminal which is marked
with the letter ‘L’ or coloured RED
• The wire which is coloured
GREEN/YELLOW must be connected to the
terminal which is marked with the letter ‘E’ or
coloured GREEN.
Note
If a 13 Amp (BS 1363) type of plug is used a 3 Amp or 5 Amp fuse must be
fitted, either in the plug or adaptor, or on the distribution board.
E
GREEN /
YELLOW
BLUE FUSE
BROWN
CORD
GRIP
NL
Important Safety Precautions
3
The 110V version of the MS907W complies to the
requirement ANSI/UL STD.1492, is certified to CAN/CSA
STD.C22.2 NO.1 and is approved by ETL for sale in the USA
and Canada
Downloaded from www.Manualslib.com manuals search engine

Specyfikacje produktu

Marka: Mordaunt Short
Kategoria: subwoofer
Model: Mordaunt-Short MS907W

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Mordaunt Short Mordaunt-Short MS907W, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje subwoofer Mordaunt Short

Mordaunt Short

Mordaunt Short Performance 9 Instrukcja

28 Września 2024
Mordaunt Short

Mordaunt Short Mezzo 9 Instrukcja

28 Września 2024
Mordaunt Short

Mordaunt Short Mordaunt-Short MS907W Instrukcja

28 Września 2024
Mordaunt Short

Mordaunt Short MS 909W Instrukcja

27 Września 2024
Mordaunt Short

Mordaunt Short MS907W Instrukcja

27 Września 2024
Mordaunt Short

Mordaunt Short MS309W Instrukcja

27 Września 2024
Mordaunt Short

Mordaunt Short MS308 Premiere Instrukcja

27 Września 2024

Instrukcje subwoofer

Najnowsze instrukcje dla subwoofer

JL Audio

JL Audio SGR-10TW3 Instrukcja

13 Października 2024
Teufel

Teufel T6 Instrukcja

13 Października 2024
Polk

Polk DB1040 Instrukcja

10 Października 2024
OSD Audio

OSD Audio NERO DUAL X8 Instrukcja

9 Października 2024
OSD Audio

OSD Audio NERO WSA Instrukcja

9 Października 2024
Kicker

Kicker 51CWQ102 Instrukcja

9 Października 2024
Kicker

Kicker 51CWQ122 Instrukcja

9 Października 2024
Kicker

Kicker 43C84 Instrukcja

9 Października 2024
Kicker

Kicker 51CWQ124 Instrukcja

9 Października 2024
OSD Audio

OSD Audio FS12 Instrukcja

9 Października 2024