Instrukcja obsługi Monitor Audio CW10

Monitor Audio subwoofer CW10

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Monitor Audio CW10 (19 stron) w kategorii subwoofer. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/19
O w n e r s M a n u a l
Contents
Introduction 1
Unpacking 1
SubConnect 1
AmpPanel 2
Positioning/InitialSetUp 4
SetUp 4
RS232 5
RS232WiringConguration 5
RS232CommunicationSet-UpParameters 5
CommandProtocol 5
CommandList 5
EQProles 6
InfraRedRemoteCodes 6
UpdateFirmwareonSub 6
BootloaderMode 6
AutomaticUpdate. 7
ManualUpdate 7
FactoryReset 8
Guarantee 8
Specications 9
TroubleShooting 10
OwnerInformation 10
ENGLISH
Introduction
Thank you for your purchase of the CW8 or CW10, which have been designed and constructed using quality systems and materials
to provide years of enjoyment, reliability and pride of ownership.
The subwoofers both use our own, proprietary in-house developed DSP and EQ proles to provide you with the all encompassing
Monitor Audio experience. With technology used in the agship range, the Platinum II Series, these subwoofers will ll the room
with ground shaking bass.
Please read through this manual to familiarise yourself with any safety advice and how to set up your subwoofer to achieve the
very best listening experience.
Please retain this manual for future reference.
Unpacking
Care must be taken at all times when handling the subwoofer due to the weight and the construction of the
product. We recommend a two-person lift wherever appropriate.
The mains power cord(s) and 12 volt trigger cable are contained separately in the packaging and should be removed prior to
unpacking the product.
To remove the subwoofer from its carton place some protective material on the oor and having removed any loose items (mains
lead(s) and 12 volt trigger lead) from the top of the packaging, carefully invert the carton. Also refer to the icons printed on the
carton. Gradually pull the carton upwards to expose the subwoofer, which will be presented with its base uppermost. Remove
xing tape from bag and expose the base/cabinet.
SubConnect
The Monitor Audio SubConnect application is a Windows only application that enables the end user to fully customise and control the
advanced features of the subwoofer. The application is downloadable from the Monitor Audio website (www.monitoraudio.co.uk). Here
you will nd full instructions on how to install and use it.
The application will be required should armware update be needed for the CW8 or CW10.
monitoraudio.com 1
CUSTOM SUBWOOFER2
40HzMIN MAX 120Hz
Intertek
3100294
11
6
121314
1
2
3
4
5
7
7a
8
9
10
1. Volume Control
This controls the master volume of the subwoofer. Further ne trimming can be achieved via the SubConnect application.
2. 12v Trigger - Centre Pin = +12v
For external power control from AV amplier/ receiver to the subwoofer (cable supplied), and to toggle between dierent presets
depending on how it is set up in the SubConnect application. The default setting is to control the power.
This 12 volt signal comes from the source amplier and supplies the subwoofer with a signal to perform a predetermined action.
This is either to turn it on or to switch presets. When used to turn the subwoofer on and o, it is a very energy ecient method
of power control. The auto o timer and signal sense features will not operate when the 12v trigger is connected.
3. RS232 Control
For use with home automation systems and uses a conventional RJ45 connector, refer to page 5 for the wiring conguration
and set up protocol.
4. USB-B Socket
This is provided to update the rmware and settings of the subwoofer in conjunction with the SubConnect application. The
application must be downloaded from the Monitor Audio website. A USB cable is not included, please use the appropriate
USB A - USB B cable.
AmpPanel

Specyfikacje produktu

Marka: Monitor Audio
Kategoria: subwoofer
Model: CW10

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Monitor Audio CW10, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje subwoofer Monitor Audio

Monitor Audio

Monitor Audio Anthra W15 Instrukcja

5 Października 2024
Monitor Audio

Monitor Audio Radius 390 Instrukcja

28 Września 2024
Monitor Audio

Monitor Audio Mass W200 Instrukcja

28 Września 2024
Monitor Audio

Monitor Audio Silver W-12 Instrukcja

28 Września 2024
Monitor Audio

Monitor Audio Apex AW-12 Instrukcja

28 Września 2024
Monitor Audio

Monitor Audio CW8 Instrukcja

28 Września 2024
Monitor Audio

Monitor Audio CW10 Instrukcja

28 Września 2024
Monitor Audio

Monitor Audio R370HD Instrukcja

28 Września 2024
Monitor Audio

Monitor Audio Radius 380 Instrukcja

28 Września 2024
Monitor Audio

Monitor Audio 360hd Instrukcja

28 Września 2024

Instrukcje subwoofer

Najnowsze instrukcje dla subwoofer

JL Audio

JL Audio SGR-10TW3 Instrukcja

13 Października 2024
Teufel

Teufel T6 Instrukcja

13 Października 2024
Polk

Polk DB1040 Instrukcja

10 Października 2024
OSD Audio

OSD Audio NERO DUAL X8 Instrukcja

9 Października 2024
OSD Audio

OSD Audio NERO WSA Instrukcja

9 Października 2024
Kicker

Kicker 51CWQ102 Instrukcja

9 Października 2024
Kicker

Kicker 51CWQ122 Instrukcja

9 Października 2024
Kicker

Kicker 43C84 Instrukcja

9 Października 2024
Kicker

Kicker 51CWQ124 Instrukcja

9 Października 2024
OSD Audio

OSD Audio FS12 Instrukcja

9 Października 2024