Instrukcja obsługi Mio BTH200

Mio Słuchawki BTH200

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Mio BTH200 (8 stron) w kategorii Słuchawki. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/8
1 www.everik.com BTH200.KM.072013.IM
BTH200
Adjustable Bluetooth Stereo Headset
Package Contents:
Adjustable Bluetooth Stereo Headset
USB cable with micro connector for charging
Specifications:
Bluetooth specicaon: V2.1+EDR
Bluetooth proles supported: HSP, HFP,A2DP AVRCP and
Operang distance: meters Class 10 II
Baery capacity: 230 mAh
Talk me: Up to 11 hours
Music playing me: About 10 hours
Standby me: About 250 hours
Charging me: About 2.5 hours
Charge input voltage: DC 5V
Dimensions: 162×153.5×32 mm
Weight: g 103
Features:
Adjustable headband with so comfortable ear pads
Embedded microphone for hands free calling from Bluetooth enabled - -
devices
Pause & play music automacally when receiving incoming calls
Automacally connects to the last connected Bluetooth device
Charges via 2.5mm DC Jack
Talk me / Music play me: 11hrs
Baery capacity: 230 mAh with charging me of 2.5 hrs.
1. Le Speaker 7. Fast forward
2. Right speaker 8. LED indicator
3. Retractable headband 9. MFB buon: music pause / play
4. 10. Rewind Volume up
5. 11. Volume down - Built in microphone
6. Charging jack
Headset Overview
2 www.everik.com BTH200.KM.072013.IM
1. Charging the headset
The headset comes with a built in rechargeable baery, prior to using it, it is recommended to charge the baery fully for the rst me. When the headset is low -
power, the headset emits “Dongdong” tones about every 20 seconds and the red LED ashes. Please recharge the baery of the headset.
How to charge the headset:
Plug USB charging cable into the USB port of computer and connect the micro connector to the headset
It will take about 3 hours to nish charging
Red light on: Charging
Red light o: Finished charging
2. Turning the headset on/o
Funcons Operaon LED indicator
Turning On Press and hold MFB buon for 4 seconds unl blue LED ashes Blue LED on one second
Turning O Press and hold MFB buon for 4 seconds unl red LED ashes Red LED on one second
Note: In order to save power, the headset will turn o automacally if no devices are connected aer 5 minutes.
3. Pairing the headset
Funcons Operaon LED indicator
Entering pairing mode Ensure the headset is o, and then press and hold the MFB buon for 7 to
8 seconds unl red and blue LED ash alternately
Red and blue LED ash alternately
3 1. Pairing the headset—Notes-
Prior to using the headset for the rst me, you have to pair it with a Bluetooth enabled device. The pairing procedures may dier pending on the model of the -
device you’re trying to pair. Please refer to your device/phone user manual for further informaon.
The general pairing procedures are as follows:
Keep your headset and phone within 1 meter when pairing;
Start the pairing mode operaon on your headset (see #3 pairing headset)
Acvate your device Bluetooth funcon and set your device to search for Bluetooth devices within range and select “BTH200” m the list of devices shown;fro
Enter PIN/ Password No: “0000”( Note: If the mobile phone supports Bluetooth V2.1, password is not required.)
If prompted by your device to connect, select “Yes”
Aer successfully connecng, blue LED light on the headset ashes 2/3 mes every 4 seconds
Notes:
If pairing failed, please turn o the headset rst and then re pair according to steps 1 menoned above.- -6
Aer inial pairing, the headset and the device will remember each other, they will no longer need to re pair next me. The headset can store up to 8 paired devices. When the -
number of paired devices exceeds 8, the rst one will be replaced.
4. Playing Music
Funcons Status of the headset LED indicator
Volume up Playing music Press + buon
Volume down Playing music - Press buon
Rewind Playing music Press buon once◄
Fast forward Playing music Press buon once►
Pause Playing music Press MFB once
Play Pausing music Press MFB once
When the headset connects to a mobile phone or Bluetooth transmier which supports A2DP, you can enjoy music wirelessly through the headset.
3 www.everik.com BTH200.KM.072013.IM
Note: Pairing mode will last 2 minutes. If not devices can be connected aer 2 minutes, it will return to standby mode automacally.
5. Making calls
Funcon Status of BTH100 Operaon
Cancel calling Calling Press MFB buon once
Answer a call Incoming ring Press MFB buon once
Reject a call Incoming ring Press and hold MFB buon for 2 seconds and release it unl hearing
indicaon tone
End a call During a call Press MFB buon once
Volume up During a call Press buon
+
+
+
+ +
Volume down During a call Press
－
－
－
－－button
Call transfer (cell phone to headset) During a call Press buon for 2 seconds MFB
Microphone mute During a call Double click buon MFB
Cancel mute During a call Double click buon MFB
Voice dial Standby mode and connected to a device Press < buon about 2 seconds and release it unl hear a prompt tone
Redial last number Standby mode and connected to a device Double click buon MFB
6. LED indicator
A. Charging
LED Indicator Status of headset
Red LED on Charging
Red LED o Finish Charging
B. Pairing with Bluetooth device
LED Indicator Status of headset
Red and blue LED ashes alternately Pairing mode
Blue LED ashes once quickly every 2 seconds Not connect device
Blue LED ashes twice quickly every 4 seconds Have already connected HFP or A2DP
Blue LED ashes three mes quickly every 4 seconds Connect HFP and A2DP simultaneously
Blue LED ashes quickly Calling/incoming call
Blue LED ashes once quickly every 4 seconds During a call
Red LED ashes twice every 30 seconds Low baery
7. Indicaon tone
Indicaon tone Status of the headset
Connuous two prompt tone every 10 seconds Conversaon mode and microphone mute
Three “dong” warning tone every 20 seconds Low baery
8. Factory Reset
In turned o mode, press and hold MFB and volume up “+” buon about 8 seconds, you will see red LED on 1 second and hear two tones.
Aer factory reset, the paired list of devices will be deleted.

Specyfikacje produktu

Marka: Mio
Kategoria: Słuchawki
Model: BTH200

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Mio BTH200, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Słuchawki Mio

Mio

Mio BTH200 Instrukcja

22 Sierpnia 2024

Instrukcje Słuchawki

Najnowsze instrukcje dla Słuchawki

JBL

JBL Junior 470NC Instrukcja

3 Stycznia 2025
Edifier

Edifier H9 Instrukcja

3 Stycznia 2025
Majority

Majority Tru 1 Earbuds Instrukcja

2 Stycznia 2025
Majority

Majority Tru 2 ANC Earbuds Instrukcja

2 Stycznia 2025
AKAI

AKAI BTH-W150ANC Instrukcja

2 Stycznia 2025
Creative

Creative Outlier Go Instrukcja

2 Stycznia 2025
Creative

Creative Outlier Free Mini Instrukcja

2 Stycznia 2025
Klipsch

Klipsch T2 True Wireless Instrukcja

31 Grudnia 2025
Klipsch

Klipsch T3 True Wireless Instrukcja

31 Grudnia 2025
JBL

JBL UA Project Rock Over-Ear Training Headphones Instrukcja

31 Grudnia 2025