Instrukcja obsługi Milwaukee M12 Fuel HATCHET 2527-21
Milwaukee
Maszyna do piłowania
M12 Fuel HATCHET 2527-21
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Milwaukee M12 Fuel HATCHET 2527-21 (21 stron) w kategorii Maszyna do piłowania. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/21

Cat. No. / No de cat.
2527-20
M12 FUEL™ HATCHET™ 6" PRUNING SAW
SCIE D'ÉLAGAGE DE 152 (6") HATCHET™ DE M12 FUEL™mm
SIERRA PODADORA DE 152 mm (6") HATCHET™ DE M12 FUEL™
OPERATOR'S MANUAL
MANUEL de L'UTILISATEUR
MANUAL del OPERADOR
WARNING To reduce the risk of injury, user must read and understand operator's manual.
AVERTISSEMENT An de réduire le risque de blessures, l'utilisateur doit lire et bien
comprendre le manuel.
ADVERTENCIA Para reducir el riesgo de lesiones, el usuario debe leer y entender el manual.
WARNING To reduce the risk of injury, user must read and understand operator's manual.
AVERTISSEMENT An de réduire le risque de blessures, l'utilisateur doit lire et bien
comprendre le manuel.
ADVERTENCIA Para reducir el riesgo de lesiones, el usuario debe leer y entender el manual.

2
GENERAL POWER TOOL
SAFETY WARNINGS
WARNING
Read all safety warnings, instruc-
tions, illustrations and specica-
tions provided with this power tool. Failure to
follow all instructions listed below may result in
electric shock, re and/or serious injury. Save all
warnings and instructions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-oper-
ated (cordless) power tool.
WORK AREA SAFETY
• Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
• Do not operate power tools in explosive atmo-
spheres, such as in the presence of ammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
• Keep children and bystanders away while operating
a power tool. Distractions can cause you to lose control.
ELECTRICAL SAFETY
•
Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodied plugs and matching outlets will
reduce risk of electric shock.
• Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
• Do not expose power tools to rain or wet condi-
tions. Water entering a power tool will increase the
risk of electric shock.
• Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords increase
the risk of electric shock.
• When operating a power tool outdoors, use an exten-
sion cord suitable for outdoor use. Use of a cord suit-
able for outdoor use reduces the risk of electric shock.
• If operating a power tool in a damp location is
unavoidable, use a ground fault circuit interrupter
(GFCI) protected supply. Use of an GFCI reduces
the risk of electric shock.
PERSONAL SAFETY
• Stay alert, watch what you are doing and use
common sense when operating a power tool. Do
not use a power tool while you are tired or under
the inuence of drugs, alcohol or medication. A
moment of inattention while operating power tools
may result in serious personal injury.
• Use personal protective equipment. Always wear
eye protection. Protective equipment such as a dust
mask, non-skid safety shoes, hard hat or hearing
protection used for appropriate conditions will reduce
personal injuries.
• Prevent unintentional starting. Ensure the switch
is in the o-position before connecting to power
source and/or battery pack, picking up or carrying
the tool. Carrying power tools with your nger on the
switch or energizing power tools that have the switch
on invites accidents.
• Remove any adjusting key or wrench before turning
the power tool on. A wrench or a key left attached to a ro-
tating part of the power tool may result in personal injury.
• Do not overreach. Keep proper footing and balance
at all times. This enables better control of the power
tool in unexpected situations.
• Dress properly. Do not wear loose clothing or
jewelry. Keep your hair and clothing away from
moving parts. Loose clothes, jewelry or long hair can
be caught in moving parts.
• If devices are provided for the connection of dust
extraction and collection facilities, ensure these
are connected and properly used. Use of dust
collection can reduce dust-related hazards.
• Do not let familiarity gained from frequent use of
tools allow you to become complacent and ignore
tool safety principles. A careless action can cause
severe injury within a fraction of a second.
POWER TOOL USE AND CARE
• Do not force the power tool. Use the correct power tool
for your application. The correct power tool will do the
job better and safer at the rate for which it was designed.
• Do not use the power tool if the switch does not turn
it on and o. Any power tool that cannot be controlled
with the switch is dangerous and must be repaired.
• Disconnect the plug from the power source and/
or remove the battery pack, if detachable, from
the power tool before making any adjustments,
changing accessories, or storing power tools.
Such preventive safety measures reduce the risk of
starting the power tool accidentally.
• Store idle power tools out of the reach of children and
do not allow persons unfamiliar with the power tool
or these instructions to operate the power tool. Pow-
er tools are dangerous in the hands of untrained users.
• Maintain power tools and accessories. Check for
misalignment or binding of moving parts, breakage
of parts and any other condition that may aect
the power tool’s operation. If damaged, have the
power tool repaired before use. Many accidents
are caused by poorly maintained power tools.
• Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
• Use the power tool, accessories and tool bits etc.
in accordance with these instructions, taking into
account the working conditions and the work to
be performed. Use of the power tool for operations
dierent from those intended could result in a hazardous
situation.
• Keep handles and grasping surfaces dry, clean
and free from oil and grease. Slippery handles and
grasping surfaces do not allow for safe handling and
control of the tool in unexpected situations.
BATTERY TOOL USE AND CARE
• Recharge only with the charger specied by the
manufacturer. A charger that is suitable for one type
of battery pack may create a risk of re when used
with another battery pack.
• Use power tools only with specically designated
battery packs. Use of any other battery packs may
create a risk of injury and re.
• When battery pack is not in use, keep it away
from other metal objects, like paper clips, coins,
keys, nails, screws or other small metal objects,
that can make a connection from one terminal to
another. Shorting the battery terminals together may
cause burns or a re.
• Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact acci-
dentally occurs, ush with water. If liquid contacts
eyes, additionally seek medical help. Liqui
ejected from the battery may cause irritation or burns

4
• Store pruning saw when not in use. Pruning saw
should be stored in a dry and high or locked area out
of the reach of children. When storing pruning saw
place the cover on the bar and chain.
• Battery operated units do not have to be plugged
into an electrical outlet; therefore, they are always
in operating condition. Be aware of possible haz-
ards even when unit is not operating.
• Save these instructions. Refer to them frequently
and use them to instruct others who may use this
product. If you loan someone this product, loan them
these instructions also.
• After each use, clean the machine with a soft dry
cloth. Remove any chips, dirt and debris in the
battery bay.
• Follow the manufacturer’s sharpening and main-
tenance instructions for the saw chain. Decreas-
ing the depth gauge height can lead to increased
kickback.
• Keep handles dry, clean, and free from oil and
grease. Greasy, oily handles are slippery causing
loss of control.
• Always use common sense and be cautious when
using tools. It is not possible to anticipate every
situation that could result in a dangerous outcome.
Do not use this tool if you do not understand these
operating instructions or you feel the work is beyond
your capability; contact Milwaukee Tool or a trained
professional for additional information or training.
• Maintain labels and nameplates. These carry
important information. If unreadable or missing, contact
a MILWAUKEE service facility for a free replacement.
•
WARNING
Some dust created by power sanding,
sawing, grinding, drilling, and other
construction activities contains chemicals known to
cause cancer, birth defects or other reproductive harm.
Some examples of these chemicals are:
• lead from lead-based paint
• crystalline silica from bricks and cement and other
masonry products, and
• arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on
how often you do this type of work. To reduce your
exposure to these chemicals: work in a well ventilated
area, and work with approved safety equipment, such
as those dust masks that are specially designed to
lter out microscopic particles.
SPECIFICATIONS
Cat. No. 2527-20 .....................................................
Volts 12 DC..............................................................
Battery Type .................................................M12™
Charger Type M12™................................................
RPM ................................................................2,650
Chain Speed ............................................984 ft/min
Bar Length ........................................................... 6"
Cutting Capacity ............................................... 5.5"
Chain Oil Tank Capacity ................................1.7 oz
Replacement Bar .................................. 49-16-2733
Chain Gauge ................................................ 0.043"
Replacement Chain .............................. 49-16-2732
Chain Type ........................................ Low kickback
Chain Pitch .....................................3/8" Low prole
Chain Teeth .........................................................28
Recommended Ambient
Operating Temperature ......................0°F to 125°F
• Dress Properly - Wear snug tting clothing. Always
wear heavy, long pants, long sleeves, overalls, jeans
or chaps made of cut resistant material or ones that
contain cut resistant inserts. Wear non-slip safety
footwear. Wear non-slip heavy duty gloves to improve
your grip and to protect your hands. Do not wear
jewelry, short pants, sandals, or go barefoot. Do not
wear loose tting clothing, which could be drawn into
the motor or catch the chain or underbrush. Secure
hair so it is above shoulder level.
• Heavy protective clothing may increase operator
fatigue, which could lead to heat stroke. During
weather that is hot and humid, heavy work should be
scheduled for early morning or late afternoon hours
when temperatures are cooler.
• Always wear proper eye protection with side
shields, marked to comply with ANSI Z87.1 when
operating the pruning saw.
• Always be aware of what you are doing when
using the pruning saw. Use common sense. Do
not operate the pruning saw when you are tired, ill, or
under the inuence of alcohol, drugs, or medication.
• Keep all parts of your body away from the saw
chain when the unit is running.
• Never let anyone use your pruning saw who has
not received adequate instructions in its proper
use. This applies to rentals as well as privately owned
saws.
• Before you start the unit, make sure the saw chain
is not contacting any object.
• Stop the pruning saw before setting it down.
• Maintain the unit with care. Keep the cutting edge
sharp and clean for best performance and to reduce
the risk of injury. Follow instructions for lubricating
and changing accessories.
• Maintain a rm grip on the recommended grasp-
ing surfaces. If an operation cannot be performed
safely with two hands on the saw, USE EXTREME
CAUTION.
• During operations where it is necessary to use
one hand, such as to steady or control the work-
piece/branch, guide workpiece away from you, or
provide better visibility to the work area:
• Keep free hand clear of the chain and out of the
cutting path.
• Maintain a rm grip on the branch being cut to avoid
"skating" or "bouncing" of the saw.
• Never cut above shoulder height.
• Do not cross arms or overreach.
• Always cut away from yourself.
• -Avoid excess exing or tension on the branch be
ing cut.
• Do not operate a pruning saw that is damaged, im-
properly adjusted, or not completely and securely
assembled. Chain should slow to a stop when the
switch trigger is released. If the chain continues to
turn after the switch trigger has been released, have
the unit serviced by an authorized service center.
• Do not force the pruning saw. The job can be
performed better and safer at the rate for which it
was intended.
• Always use the right product for your application.
The pruning saw should be used for cutting wood only.
Never use the pruning saw to cut plastic, masonry or
non-wood building materials.
• Use extreme caution when cutting thin branches,
vines or small underbrush. The slender material
may catch the saw chain and be whipped toward you
or pull you o balance. We recommend using hedge
trimmers or brush cutters for these operations.
SYMBOLOGY
Specyfikacje produktu
Marka: | Milwaukee |
Kategoria: | Maszyna do piłowania |
Model: | M12 Fuel HATCHET 2527-21 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Milwaukee M12 Fuel HATCHET 2527-21, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Maszyna do piłowania Milwaukee

9 Października 2024

8 Października 2024

6 Października 2024

4 Października 2024

4 Października 2024

4 Października 2024

4 Października 2024

4 Października 2024

3 Października 2024

3 Października 2024
Instrukcje Maszyna do piłowania
- Maszyna do piłowania AEG
- Maszyna do piłowania Worx
- Maszyna do piłowania Stihl
- Maszyna do piłowania Bosch
- Maszyna do piłowania Yato
- Maszyna do piłowania Parkside
- Maszyna do piłowania Lionelo
- Maszyna do piłowania Global
- Maszyna do piłowania Stiga
- Maszyna do piłowania Toolcraft
- Maszyna do piłowania Festool
- Maszyna do piłowania Bavaria By Einhell
- Maszyna do piłowania MacAllister
- Maszyna do piłowania Stanley
- Maszyna do piłowania Black & Decker
- Maszyna do piłowania Scheppach
- Maszyna do piłowania Proxxon
- Maszyna do piłowania Ford
- Maszyna do piłowania Hazet
- Maszyna do piłowania RIKON
- Maszyna do piłowania Grizzly
- Maszyna do piłowania Gardena
- Maszyna do piłowania DeWalt
- Maszyna do piłowania Einhell
- Maszyna do piłowania Remington
- Maszyna do piłowania Genesis
- Maszyna do piłowania Hyundai
- Maszyna do piłowania Silverline
- Maszyna do piłowania Husqvarna
- Maszyna do piłowania Makita
- Maszyna do piłowania Ozito
- Maszyna do piłowania Draper
- Maszyna do piłowania Fuxtec
- Maszyna do piłowania RYOBI
- Maszyna do piłowania Chicago Pneumatic
- Maszyna do piłowania Cobra
- Maszyna do piłowania Flex
- Maszyna do piłowania Yard Force
- Maszyna do piłowania GO/ON
- Maszyna do piłowania DEDRA
- Maszyna do piłowania Baumr-AG
- Maszyna do piłowania Biltema
- Maszyna do piłowania Sovereign
- Maszyna do piłowania CMI
- Maszyna do piłowania Hilti
- Maszyna do piłowania Sterwins
- Maszyna do piłowania Max Bahr
- Maszyna do piłowania Trotec
- Maszyna do piłowania Dremel
- Maszyna do piłowania Meec Tools
- Maszyna do piłowania AL-KO
- Maszyna do piłowania Güde
- Maszyna do piłowania Texas
- Maszyna do piłowania ATIKA
- Maszyna do piłowania Bavaria
- Maszyna do piłowania Zipper
- Maszyna do piłowania Mafell
- Maszyna do piłowania Florabest
- Maszyna do piłowania Solo
- Maszyna do piłowania Ferrex
- Maszyna do piłowania DURO PRO
- Maszyna do piłowania McKenzie
- Maszyna do piłowania Westfalia
- Maszyna do piłowania Ergotools Pattfield
- Maszyna do piłowania Oregon Scientific
- Maszyna do piłowania Fein
- Maszyna do piłowania Ferm
- Maszyna do piłowania Hitachi
- Maszyna do piłowania Herkules
- Maszyna do piłowania Craftsman
- Maszyna do piłowania Matrix
- Maszyna do piłowania Fieldmann
- Maszyna do piłowania Homelite
- Maszyna do piłowania Ridgid
- Maszyna do piłowania Shindaiwa
- Maszyna do piłowania Gardenline
- Maszyna do piłowania PowerPlus
- Maszyna do piłowania Bebe Confort
- Maszyna do piłowania Alpha Tools
- Maszyna do piłowania Hobart
- Maszyna do piłowania Vonroc
- Maszyna do piłowania Spear & Jackson
- Maszyna do piłowania Powerfix
- Maszyna do piłowania HiKOKI
- Maszyna do piłowania Workzone
- Maszyna do piłowania McCulloch
- Maszyna do piłowania Hammer
- Maszyna do piłowania Proviel
- Maszyna do piłowania Porter-Cable
- Maszyna do piłowania Metabo
- Maszyna do piłowania Bestgreen
- Maszyna do piłowania EGO
- Maszyna do piłowania Cotech
- Maszyna do piłowania Skil
- Maszyna do piłowania Cocraft
- Maszyna do piłowania Wolfcraft
- Maszyna do piłowania Brennenstuhl
- Maszyna do piłowania Clarke
- Maszyna do piłowania Tryton
- Maszyna do piłowania ACG
- Maszyna do piłowania Sun Joe
- Maszyna do piłowania Tacklife
- Maszyna do piłowania Luxor
- Maszyna do piłowania Maktec
- Maszyna do piłowania Bort
- Maszyna do piłowania Tanaka
- Maszyna do piłowania Power Craft
- Maszyna do piłowania Troy-Bilt
- Maszyna do piłowania Topcraft
- Maszyna do piłowania Martha Stewart
- Maszyna do piłowania Gamma
- Maszyna do piłowania Kress
- Maszyna do piłowania Dolmar
- Maszyna do piłowania Duro
- Maszyna do piłowania Qualcast
- Maszyna do piłowania Varo
- Maszyna do piłowania Pattfield
- Maszyna do piłowania Defort
- Maszyna do piłowania Max
- Maszyna do piłowania IKRA
- Maszyna do piłowania Truper
- Maszyna do piłowania BabyGO
- Maszyna do piłowania Echo
- Maszyna do piłowania Bruder Mannesmann
- Maszyna do piłowania MTM
- Maszyna do piłowania Powerblade
- Maszyna do piłowania Maruyama
- Maszyna do piłowania Meister Craft
- Maszyna do piłowania Batavia
- Maszyna do piłowania Holzmann
- Maszyna do piłowania Graphite
- Maszyna do piłowania Huvema
- Maszyna do piłowania Black Decker
- Maszyna do piłowania Elu
- Maszyna do piłowania Blucave
- Maszyna do piłowania Plantiflor
- Maszyna do piłowania Lux Tools
- Maszyna do piłowania Kompernass
- Maszyna do piłowania Triton
- Maszyna do piłowania BGU
- Maszyna do piłowania Avantco
- Maszyna do piłowania Kreg
- Maszyna do piłowania Sthor
- Maszyna do piłowania Verto
- Maszyna do piłowania Vulcan
- Maszyna do piłowania Germania
- Maszyna do piłowania FOM
- Maszyna do piłowania Anova
- Maszyna do piłowania Hurricane
- Maszyna do piłowania Budget
- Maszyna do piłowania Ergofix
- Maszyna do piłowania Challenge Xtreme
- Maszyna do piłowania King Craft
- Maszyna do piłowania Maxx
- Maszyna do piłowania Pro-Cut
- Maszyna do piłowania Narex
- Maszyna do piłowania Elektra Beckum
- Maszyna do piłowania Toolson
- Maszyna do piłowania Felisatti
- Maszyna do piłowania Power Smart
- Maszyna do piłowania Backyard Pro Butcher Series
- Maszyna do piłowania Toledo
- Maszyna do piłowania EFA
- Maszyna do piłowania Erbauer
- Maszyna do piłowania Exakt
- Maszyna do piłowania Jonsered
- Maszyna do piłowania Gude Pro
- Maszyna do piłowania MSW
- Maszyna do piłowania Backyard Pro
- Maszyna do piłowania Royal Catering
- Maszyna do piłowania Robust
- Maszyna do piłowania Ultranatura
- Maszyna do piłowania FIXIT
- Maszyna do piłowania Einhell Bavaria
- Maszyna do piłowania MyTool
- Maszyna do piłowania Morrison
- Maszyna do piłowania Garland
- Maszyna do piłowania Prowork
- Maszyna do piłowania Donau Elektronik
- Maszyna do piłowania TAURUS Titanium
- Maszyna do piłowania Maxbear
- Maszyna do piłowania Stalco
- Maszyna do piłowania Turbo-Silent
- Maszyna do piłowania Total
Najnowsze instrukcje dla Maszyna do piłowania

11 Marca 2025

12 Stycznia 2025

12 Stycznia 2025

12 Stycznia 2025

11 Stycznia 2025

11 Stycznia 2025

11 Stycznia 2025

11 Stycznia 2025

11 Stycznia 2025

11 Stycznia 2025