Instrukcja obsługi Milwaukee M18 FTCHS14

Milwaukee Maszyna do piłowania M18 FTCHS14

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Milwaukee M18 FTCHS14 (16 stron) w kategorii Maszyna do piłowania. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/16

OPERATOR'S MANUAL

Cat. No.

M18 FTCHS12, M18 FTCHS14

WARNING

To reduce the risk of injury, user must read and understand operator's manual.

M18 FUEL™ 12" (305 MM) AND 14" (356 MM) TOP HANDLE

CHAINSAWS

GENERAL POWER TOOL

SAFETY WARNINGS

WARNING

Read all safety warnings, instruc-

•

WORK AREA SAFETY

•

ELECTRICAL SAFETY

Keep work area clean and well lit. Cluttered or

dark areas invite accidents.

Do not operate power tools in explosive atmo-

liquids, gases or dust. Power tools create sparks

which may ignite the dust or fumes.

tions provided with this power tool. Failure to follow

all instructions listed below may result in electric shock,

Save all warnings and in-

structions for future reference. The term "power tool"

in the warnings refers to your mains-operated (corded)

power tool or battery-operated (cordless) power tool.

• Keep children and bystanders away while operating

a power tool. Distractions can cause you to lose control.

PERSONAL SAFETY

as a dust mask, non-skid safety shoes, hard hat or

hearing protection used for appropriate conditions

will reduce personal injuries.

• Power tool plugs must match the outlet. Never

modify the plug in any way. Do not use any

adapter plugs with earthed (grounded) power

tools.

reduce risk of electric shock.

• Avoid body contact with earthed or grounded

surfaces, such as pipes, radiators, ranges and

refrigerators. There is an increased risk of electric

shock if your body is earthed or grounded.

• Do not expose power tools to rain or wet condi-

tions. Water entering a power tool will increase the

risk of electric shock.

• Do not abuse the cord. Never use the cord for

carrying, pulling or unplugging the power tool.

Keep cord away from heat, oil, sharp edges or

moving parts. Damaged or entangled cords increase

the risk of electric shock.

• When operating a power tool outdoors, use an

extension cord suitable for outdoor use. Use of

a cord suitable for outdoor use reduces the risk of

electric shock.

• Stay alert, watch what you are doing and use

common sense when operating a power tool. Do

not use a power tool while you are tired or under

moment of inattention while operating power tools

may result in serious personal injury.

• Use personal protective equipment. Always

wear eye protection. Protective equipment such

• Prevent unintentional starting. Ensure the switch

source and/or battery pack, picking up or carrying

the tool.

the switch or energising power tools that have the

switch on invites accidents.

• Remove any adjusting key or wrench before

turning the power tool on. A wrench or a key left

attached to a rotating part of the power tool may

result in personal injury.

POWER TOOL USE AND CARE

• Do not overreach. Keep proper footing and

balance at all times. This enables better control

of the power tool in unexpected situations.

• If devices are provided for the connection of

dust extraction and collection facilities, ensure

these are connected and properly used. Use of

dust collection can reduce dust-related hazards.

• Do not let familiarity gained from frequent use

of tools allow you to become complacent and

ignore tool safety principles. A careless action can

cause severe injury within a fraction of a second.

taking into account the working conditions and

the work to be performed. Use of the power tool

result in a hazardous situation.

BATTERY TOOL USE AND CARE

• Keep handles and grasping surfaces dry, clean

and free from oil and grease. Slippery handles and

grasping surfaces do not allow for safe handling and

control of the tool in unexpected situations.

• Do not force the power tool. Use the correct power

tool for your application. The correct power tool

will do the job better and safer at the rate for which

it was designed.

• Do not use the power tool if the switch does not

Any power tool that cannot be

controlled with the switch is dangerous and must be

repaired.

• Disconnect the plug from the power source and/

or remove the battery pack, if detachable, from

the power tool before making any adjustments,

changing accessories, or storing power tools.

Such preventive safety measures reduce the risk of

starting the power tool accidentally.

• Store idle power tools out of the reach of children

and do not allow persons unfamiliar with the

power tool or these instructions to operate the

power tool. Power tools are dangerous in the hands

of untrained users.

• Maintain power tools and accessories. Check

for misalignment or binding of moving parts,

breakage of parts and any other condition that

have the power tool repaired before use. Many ac-

cidents are caused by poorly maintained power tools.

• Keep cutting tools sharp and clean. Properly

maintained cutting tools with sharp cutting edges

are less likely to bind and are easier to control.

• Use the power tool, accessories and tool bits

etc. in accordance with these instructions,

manufacturer. A charger that is suitable for one type

with another battery pack.

battery packs. Use of any other battery packs may

• When battery pack is not in use, keep it away

from other metal objects, like paper clips, coins,

keys, nails, screws or other small metal objects,

that can make a connection from one terminal

to another. Shorting the battery terminals together

•

• If operating a power tool in a damp location is

unavoidable, use a residual current device

(RCD) protected supply. Use of a RCD reduces

the risk of electric shock.

Dress properly. Do not wear loose clothing or

jewellery. Keep your hair and clothing away

from moving parts. Loose clothes, jewellery or

long hair can be caught in moving parts.

SERVICE

General chainsaw safety warnings:

SPECIFIC SAFETY RULES

FOR CHAINSAWS

repair person using only identical replacement

parts. This will ensure that the safety of the power

tool is maintained.

• Never service damaged battery packs. Service

of battery packs should only be performed by the

manufacturer or authorised service providers.

• Under abusive conditions, liquid may be ejected

from the battery; avoid contact. If contact acciden-

eyes, additionally seek medical help. Liquid

ejected from the battery may cause irritation or burns.

•

• Keep all parts of the body away from the saw

chain when the chainsaw is operating. Before you

start the chainsaw, make sure the saw chain is

not contacting anything. A moment of inattention

while operating chainsaws may cause entanglement

of your clothing or body with the saw chain.

• Always hold the chainsaw with your right hand

on the rear handle and your left hand on the front

handle. Holding the chainsaw with a reversed hand

should never be done.

• Hold the chainsaw by insulated gripping surfaces

only, because the saw chain may contact hidden

wiring or its own cord. Saw chains contacting a

"live" wire may make exposed metal parts of the

chainsaw "live" and could give the operator an

electric shock.

• Wear eye protection. Further protective equip-

ment for hearing head, hands, legs, and feet is

recommended. Adequate protective clothing will

contact with the saw chain.

•

• Always keep proper footing and operate the

and level surface. Slippery or unstable surfaces may

cause a loss of balance or control of the chainsaw.

• When cutting a limb that is under tension be alert

for spring back.

is released the spring loaded limb may strike the

operator and/or throw the chainsaw out of control.

• Use extreme caution when cutting brush and sap-

lings. The slender material may catch the saw chain

•

• Follow instructions for lubricating, chain tension-

ing and changing the bar and chain. Improperly

tensioned or lubricated chain may either break or

increase the chance for kickback.

• Cut wood only. Do not use chainsaw for purposes

not intended. For example: do not use chainsaw

for cutting metal, plastic, masonry or non-wood

building materials. Use of the chainsaw for opera

ous situation.

• This chainsaw is not intended for tree felling.

intended could result in serious injury to the operator

or bystanders.

•

Causes and operator prevention of kickback:

Kickback may occur when the nose or tip of the guide

bar touches an object, or when the wood closes in and

pinches the saw chain in the cut.

Tip contact in some cases may cause a sudden

reverse reaction, kicking the guide bar up and back

towards the operator.

Pinching the saw chain along the top of the guide

bar may push the guide bar rapidly back towards

the operator.

Either of these reactions may cause you to lose con-

trol of the saw which could result in serious personal

injury. Do not rely exclusively upon the safety devices

built into your saw. As a chainsaw user, you should

take several steps to keep your cutting jobs free from

accident or injury.

Kickback is the result of chainsaw misuse and/or incor-

rect operating procedures or conditions and can be

avoided by taking proper precautions as given below:

• -

circling the chainsaw handles, with both hands on

the saw and position your body and arm to allow

you to resist kickback forces. Kickback forces can

be controlled by the operator, if proper precautions

are taken. Do not let go of the chainsaw.

• Do not overreach and do not cut above shoulder

height. This helps prevent unintended tip contact and

enables better control of the chainsaw in unexpected

situations.

• Only use replacement guide bars and saw chains

Incorrect replace-

ment guide bars and saw chains may cause chain

breakage and/or kickback.

• Follow the manufacturer’s sharpening and

maintenance instructions for the saw chain.

Decreasing the depth gauge height can lead to in-

creased kickback.

• Use extreme caution to reduce the risk of falling.

Keep the saw chain well clear of any harness and

lifeline to prevent them from being severed.

• Do not attempt to block a tree until you have an

understanding of all the risks and how to avoid

them. Serious injury could occur to the operator or

bystanders from a blocking tree.

Do not use a battery pack or tool that is

damaged or modified. Damaged or modified

batteries may exhibit unpredictable behaviour

resulting in fire, explosion or risk of injury.

•

Do not expose a battery pack or tool to fire or

excessive temperature. Exposure to fire or

temperature above 130°C (265°F) may cause

explosion

Follow all charging instructions and do not

charge the battery pack or tool outside the

temperature range specified in the instruc-

tions. Charging improperly or at temperatures

outside the specified range may damage the

battery and increase the risk of fire.

Do not operate a chainsaw on a ladder, from a

rooftop, or any unstable support. Operation of a

chainsaw in this manner could result in serious

personal injury.

Carry the chainsaw by the front handle with the

chainsaw switched off and away from your

body. When transporting or storing the chain-

saw always fit the guide bar cover. Proper

handling of the chainsaw will reduce the likelihood

of accidental contact with the moving saw chain.

Do not operate a chainsaw in a tree unless you

have been specifically trained to do so.

Operation of a chainsaw in a tree without proper

training could increase the risk of serious personal

injury.

Specyfikacje produktu

Marka:	Milwaukee
Kategoria:	Maszyna do piłowania
Model:	M18 FTCHS14

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Milwaukee M18 FTCHS14, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Maszyna do piłowania Milwaukee

Milwaukee M18 FTCHS14 Instrukcja

9 Października 2024

Milwaukee MXF COSCG2 Instrukcja

8 Października 2024

Milwaukee M12 2420-21 Instrukcja

6 Października 2024

Milwaukee M18 BJS Instrukcja

4 Października 2024

Milwaukee SCS 65 Q Instrukcja

4 Października 2024

Milwaukee M12 BS Instrukcja

4 Października 2024

Milwaukee M18 FMCS66 Instrukcja

4 Października 2024

Milwaukee M18 BSX Instrukcja

4 Października 2024

Milwaukee SSPE 1500 X Instrukcja

3 Października 2024

Milwaukee SSPE 1300 RX Instrukcja

3 Października 2024

Instrukcje Maszyna do piłowania

Najnowsze instrukcje dla Maszyna do piłowania

Makita 5603 Instrukcja

15 Października 2024

MSW -TAS287 Instrukcja

15 Października 2024

MSW T-SAW300 Instrukcja

15 Października 2024

Black & Decker KS650 Instrukcja

14 Października 2024

Black & Decker GKC3630L20 Instrukcja

14 Października 2024

Ferm FKS-165 Instrukcja

14 Października 2024

Royal Catering RCBS-1650 Instrukcja

14 Października 2024

Royal Catering RCBS-1650.1ECO Instrukcja

14 Października 2024

Husqvarna 365H Instrukcja

13 Października 2024

Makita DJV181Z Instrukcja

12 Października 2024