Instrukcja obsługi Milwaukee 6523-21
Milwaukee
Maszyna do piłowania
6523-21
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Milwaukee 6523-21 (21 stron) w kategorii Maszyna do piłowania. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/21

Cat. No.
No de cat.
Cat. No.
6520-21
6523-21
6536-21
6538-21
HEAVY-DUTY ORBITAL SAWZALLS®
ROBUSTE PASSE-PARTOUT ORBITAL SAWZALL ®
SAWZALL® ORBITAL PARA TAREAS PESADAS
OPERATOR'S MANUAL
MANUEL de L'UTILISATEUR
MANUAL del OPERADOR
TO REDUCE THE RISK OF INJURY, USER MUST READ AND UNDERSTAND
OPERATOR'S MANUAL.
AFIN DE RÉDUIRE LE RISQUE DE BLESSURES, L'UTILISATEUR DOIT LIRE ET BIEN
COMPRENDRE LE MANUEL DE L'UTILISATEUR.
PARA REDUCIR EL RIESGO DE LESIONES, EL USUARIO DEBE LEER Y ENTENDER
EL MANUAL DEL OPERADOR.

2 3
WORK AREA SAFETY
ELECTRICAL SAFETY
PERSONAL SAFETY
WARNING
READ ALL INSTRUCTIONS
Failure to follow all instructions listed below may result in electric shock, fi re and/or
serious injury. The term "power tool" in all of the warnings listed below refers to your
mains-operated (corded) power tool or battery-operated (cordless) power tool.
SAVE THESE INSTRUCTIONS
GENERAL SAFETY RULES — FOR ALL POWER TOOLS
1. Keep work area clean and well lit.
Cluttered or dark areas invite acci-
dents.
2. Do not operate power tools in ex-
plosive atmospheres, such as in the
presence of fl ammable liquids, gases,
or dust. Power tools create sparks which
may ignite the dust or fumes.
3. Keep children and bystanders away
while operating a power tool. Distrac-
tions can cause you to lose control.
4. Power tool plugs must match the
outlet. Never modify the plug in any
way. Do not use any adapter plugs
with earthed (grounded) power tools.
Unmodifi ed plugs and matching outlets
will reduce risk of electric shock.
5. Avoid body contact with earthed or
grounded surfaces such as pipes,
radiators, ranges and refrigerators.
There is an increased risk of electric shock
if your body is earthed or grounded.
6. Do not expose power tools to rain or
wet conditions. Water entering a power
tool will increase the risk of electric
shock.
7. Do not abuse the cord. Never use the
cord for carrying, pulling, or unplug-
ging the power tool. Keep cord away
from heat, oil, sharp edges, or mov-
ing parts. Damaged or entangled cords
increase the risk of electric shock.
8. When operating a power tool out-
doors, use an extension cord suitable
for outdoor use. Use of a cord suitable
for outdoor use reduces the risk of elec-
tric shock.
9. Stay alert, watch what you are do-
ing and use common sense when
operating a power tool. Do not use
a power tool while you are tired or
under the infl uence of drugs, alcohol
or medication. A moment of inattention
while operating power tools may result
in serious personal injury.
10. Use safety equipment. Always wear
eye protection. Safety equipment such
as dust mask, non-skid safety shoes,
hard hat, or hearing protection used
for appropriate conditions will reduce
personal injuries.
11. Avoid accidental starting. Ensure the
switch is in the off-position before plug-
ging in. Carrying tools with your fi nger on
the switch or plugging in power tools that
have the switch on invites accidents.
12. Remove any adjusting key or wrench
before turning the power tool on. A
wrench or a key left attached to a rotat-
ing part of the power tool may result in
personal injury.
13. Do not overreach. Keep proper foot-
ing and balance at all times. This
enables better control of the power tool
in unexpected situations.
14. Dress properly. Do not wear loose
clothing or jewellery. Keep your hair,
clothing and gloves away from moving
parts. Loose clothes, jewellery, or long
hair can be caught in moving parts.
15. If devices are provided for the connec-
tion of dust extraction and collection
facilities, ensure these are connected
and properly used. Use of these de-
vices can reduce dust-related hazards.
POWER TOOL USE AND CARE
16. Do not force the power tool. Use the
correct power tool for your applica-
tion. The correct power tool will do the
job better and safer at the rate for which
it was designed.
17. Do not use the power tool if the switch
does not turn it on and off. Any power tool
that cannot be controlled with the switch is
dangerous and must be repaired.
18. Disconnect the plug from the power
source and/or the battery pack from
the power tool before making any
adjustments, changing accessories,
or storing power tools. Such preven-
tive safety measures reduce the risk of
starting the tool accidentally.
19. Store idle power tools out of the reach
of children and do not allow persons
unfamiliar with the power tools or
these instructions to operate power
tools. Power tools are dangerous in the
hands of untrained users.
20. Maintain power tools. Check for
misalignment or binding of moving
parts, breakage of parts and any
other condition that may affect the
power tool's operation. If damaged,
have the power tool repaired before
use. Many accidents are caused by
poorly maintained power tools.
21. Keep cutting tools sharp and clean.
Properly maintained cutting tools with
sharp cutting edges are less likely to
bind and are easier to control.
22. Use the power tool, accessories and
tool bits etc., in accordance with
these instructions and in the manner
intended for the particular type of
power tool, taking into account the
working conditions and the work to
be performed. Use of the power tool for
operations different from those intended
could result in a hazardous situation.
SERVICE
23. Have your power tool serviced by a
qualifi ed repair person using only
identical replacement parts. This will
ensure that the safety of the power tool
is maintained.
SPECIFIC SAFETY RULES
1. Hold tools by insulated gripping sur-
faces when performing an operation
where the cutting tool may contact
hidden wiring or its own cord. Contact
with a "live" wire will make exposed
metal parts of the tool "live" and shock
the operator.
2. Use clamps or another practical way
to secure and support the workpiece
to a stable platform. Holding the work
by hand or against your body leaves it
unstable and may lead to loss of con-
trol.
3. Keep hands away from all cutting
edges and moving parts.
4. Maintain labels and nameplates.
These carry important information.
If unreadable or missing, contact a
MILWAUKEE service facility for a free
replacement.
5. WARNING: Some dust created by
power sanding, sawing, grinding, drill-
ing, and other construction activities
contains chemicals known to cause
cancer, birth defects or other reproduc-
tive harm. Some examples of these
chemicals are:
• lead from lead-based paint
• crystalline silica from bricks and cement
and other masonry products, and
• arsenic and chromium from chemically-
treated lumber.
Your risk from these exposures varies,
depending on how often you do this
type of work. To reduce your exposure
to these chemicals: work in a well ven-
tilated area, and work with approved
safety equipment, such as those dust
masks that are specially designed to
fi lter out microscopic particles.

4 5
FUNCTIONAL DESCRIPTION
6
7
8
9
10
11
12 13
Cat. No. 6520-21
6536-21
2
4
5
6
7
8
9
10
12
11
13
Cat. No. 6523-21
6538-21
The grounding prong in the plug is connected
through the green wire inside the cord to
the grounding system in the tool. The green
wire in the cord must be the only wire con-
nected to the tool's grounding system and
must never be attached to an electrically
“live” terminal.
Your tool must be plugged into an appropri-
ate outlet, properly installed and grounded in
accordance with all codes and ordinances.
The plug and outlet should look like those
in Figure A.
Double Insulated Tools:
Tools with Two Prong Plugs
Tools marked “Double Insulated” do not
require grounding. They have a special
double insulation system which satisfies
OSHA requirements and complies with
the applicable standards of Underwriters
Laboratories, Inc., the Canadian Standard
Association and the National Electrical
Code. Double Insulated tools may be used
in either of the 120 volt outlets shown in
Figures B and C.
Grounded Tools:
Tools with Three Prong Plugs
Tools marked “Grounding Required” have a
three wire cord and three prong grounding
plug. The plug must be connected to a prop-
erly grounded outlet (See Figure A). If the
tool should electrically malfunction or break
down, grounding provides a low resistance
path to carry electricity away from the user,
reducing the risk of electric shock.
Fig. B Fig. C
Fig. A
Improperly connecting the grounding
wire can result in the risk of electric
shock. Check with a qualifi ed electri-
cian if you are in doubt as to whether
the outlet is properly grounded. Do
not modify the plug provided with
the tool. Never remove the grounding
prong from the plug. Do not use the
tool if the cord or plug is damaged.
If damaged, have it repaired by a
MILWAUKEE service facility before
use. If the plug will not fi t the outlet,
have a proper outlet installed by a
qualifi ed electrician.
GROUNDING
WARNING
Specifi cations
Cat.
No.
6520-21
6523-21
6536-21
6538-21
Volts
AC
Only
120
120
120
120
Length
of
Stroke
1-1/8"
1-1/4"
1-1/4"
1-1/4"
Strokes
per
Minute
0 - 2800
0 - 3000
0 - 3000
0 - 2800
Amps
12
13
13
15
3
1. Speed control dial
2. Handle rotation button (6523-21 only)
3. Trigger
4. Quik-Lok® cord (6523-21 only)
5. Rotating handle (6523-21 only)
6. Nameplate
7. Insulating boot
8. Shoe release lever
9. Adjustable pivot shoe
10. Blade
11. Quik-Lok® blade clamp
12. Orbit control switch
13. Cord
Amps
Double Insulated
Symbology
Underwriters Laboratories, Inc.,
United States and Canada
Volts Alternating Current
No Load Strokes
Per Minute (SPM)
Straight Cut
Orbital Cut
Specyfikacje produktu
Marka: | Milwaukee |
Kategoria: | Maszyna do piłowania |
Model: | 6523-21 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Milwaukee 6523-21, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Maszyna do piłowania Milwaukee

9 Października 2024

8 Października 2024

6 Października 2024

4 Października 2024

4 Października 2024

4 Października 2024

4 Października 2024

4 Października 2024

3 Października 2024

3 Października 2024
Instrukcje Maszyna do piłowania
- Maszyna do piłowania AEG
- Maszyna do piłowania Worx
- Maszyna do piłowania Stihl
- Maszyna do piłowania Bosch
- Maszyna do piłowania Yato
- Maszyna do piłowania Parkside
- Maszyna do piłowania Lionelo
- Maszyna do piłowania Global
- Maszyna do piłowania Stiga
- Maszyna do piłowania Toolcraft
- Maszyna do piłowania Festool
- Maszyna do piłowania Bavaria By Einhell
- Maszyna do piłowania MacAllister
- Maszyna do piłowania Stanley
- Maszyna do piłowania Black & Decker
- Maszyna do piłowania Scheppach
- Maszyna do piłowania Proxxon
- Maszyna do piłowania Ford
- Maszyna do piłowania Hazet
- Maszyna do piłowania RIKON
- Maszyna do piłowania Grizzly
- Maszyna do piłowania Gardena
- Maszyna do piłowania DeWalt
- Maszyna do piłowania Einhell
- Maszyna do piłowania Remington
- Maszyna do piłowania Genesis
- Maszyna do piłowania Hyundai
- Maszyna do piłowania Silverline
- Maszyna do piłowania Husqvarna
- Maszyna do piłowania Makita
- Maszyna do piłowania Ozito
- Maszyna do piłowania Draper
- Maszyna do piłowania Fuxtec
- Maszyna do piłowania RYOBI
- Maszyna do piłowania Chicago Pneumatic
- Maszyna do piłowania Cobra
- Maszyna do piłowania Flex
- Maszyna do piłowania Yard Force
- Maszyna do piłowania GO/ON
- Maszyna do piłowania DEDRA
- Maszyna do piłowania Baumr-AG
- Maszyna do piłowania Biltema
- Maszyna do piłowania Sovereign
- Maszyna do piłowania CMI
- Maszyna do piłowania Hilti
- Maszyna do piłowania Sterwins
- Maszyna do piłowania Max Bahr
- Maszyna do piłowania Trotec
- Maszyna do piłowania Dremel
- Maszyna do piłowania Meec Tools
- Maszyna do piłowania AL-KO
- Maszyna do piłowania Güde
- Maszyna do piłowania Texas
- Maszyna do piłowania ATIKA
- Maszyna do piłowania Bavaria
- Maszyna do piłowania Zipper
- Maszyna do piłowania Mafell
- Maszyna do piłowania Florabest
- Maszyna do piłowania Solo
- Maszyna do piłowania Ferrex
- Maszyna do piłowania DURO PRO
- Maszyna do piłowania McKenzie
- Maszyna do piłowania Westfalia
- Maszyna do piłowania Ergotools Pattfield
- Maszyna do piłowania Oregon Scientific
- Maszyna do piłowania Fein
- Maszyna do piłowania Ferm
- Maszyna do piłowania Hitachi
- Maszyna do piłowania Herkules
- Maszyna do piłowania Craftsman
- Maszyna do piłowania Matrix
- Maszyna do piłowania Fieldmann
- Maszyna do piłowania Homelite
- Maszyna do piłowania Ridgid
- Maszyna do piłowania Shindaiwa
- Maszyna do piłowania Gardenline
- Maszyna do piłowania PowerPlus
- Maszyna do piłowania Bebe Confort
- Maszyna do piłowania Alpha Tools
- Maszyna do piłowania Hobart
- Maszyna do piłowania Vonroc
- Maszyna do piłowania Spear & Jackson
- Maszyna do piłowania Powerfix
- Maszyna do piłowania HiKOKI
- Maszyna do piłowania Workzone
- Maszyna do piłowania McCulloch
- Maszyna do piłowania Hammer
- Maszyna do piłowania Proviel
- Maszyna do piłowania Porter-Cable
- Maszyna do piłowania Metabo
- Maszyna do piłowania Bestgreen
- Maszyna do piłowania EGO
- Maszyna do piłowania Cotech
- Maszyna do piłowania Skil
- Maszyna do piłowania Cocraft
- Maszyna do piłowania Wolfcraft
- Maszyna do piłowania Brennenstuhl
- Maszyna do piłowania Clarke
- Maszyna do piłowania Tryton
- Maszyna do piłowania ACG
- Maszyna do piłowania Sun Joe
- Maszyna do piłowania Tacklife
- Maszyna do piłowania Luxor
- Maszyna do piłowania Maktec
- Maszyna do piłowania Bort
- Maszyna do piłowania Tanaka
- Maszyna do piłowania Power Craft
- Maszyna do piłowania Troy-Bilt
- Maszyna do piłowania Topcraft
- Maszyna do piłowania Martha Stewart
- Maszyna do piłowania Gamma
- Maszyna do piłowania Kress
- Maszyna do piłowania Dolmar
- Maszyna do piłowania Duro
- Maszyna do piłowania Qualcast
- Maszyna do piłowania Varo
- Maszyna do piłowania Pattfield
- Maszyna do piłowania Defort
- Maszyna do piłowania Max
- Maszyna do piłowania IKRA
- Maszyna do piłowania Truper
- Maszyna do piłowania BabyGO
- Maszyna do piłowania Echo
- Maszyna do piłowania Bruder Mannesmann
- Maszyna do piłowania MTM
- Maszyna do piłowania Powerblade
- Maszyna do piłowania Maruyama
- Maszyna do piłowania Meister Craft
- Maszyna do piłowania Batavia
- Maszyna do piłowania Holzmann
- Maszyna do piłowania Graphite
- Maszyna do piłowania Huvema
- Maszyna do piłowania Black Decker
- Maszyna do piłowania Elu
- Maszyna do piłowania Blucave
- Maszyna do piłowania Plantiflor
- Maszyna do piłowania Lux Tools
- Maszyna do piłowania Kompernass
- Maszyna do piłowania Triton
- Maszyna do piłowania BGU
- Maszyna do piłowania Avantco
- Maszyna do piłowania Kreg
- Maszyna do piłowania Sthor
- Maszyna do piłowania Verto
- Maszyna do piłowania Vulcan
- Maszyna do piłowania Germania
- Maszyna do piłowania FOM
- Maszyna do piłowania Anova
- Maszyna do piłowania Hurricane
- Maszyna do piłowania Budget
- Maszyna do piłowania Ergofix
- Maszyna do piłowania Challenge Xtreme
- Maszyna do piłowania King Craft
- Maszyna do piłowania Maxx
- Maszyna do piłowania Pro-Cut
- Maszyna do piłowania Narex
- Maszyna do piłowania Elektra Beckum
- Maszyna do piłowania Toolson
- Maszyna do piłowania Felisatti
- Maszyna do piłowania Power Smart
- Maszyna do piłowania Backyard Pro Butcher Series
- Maszyna do piłowania Toledo
- Maszyna do piłowania EFA
- Maszyna do piłowania Erbauer
- Maszyna do piłowania Exakt
- Maszyna do piłowania Jonsered
- Maszyna do piłowania Gude Pro
- Maszyna do piłowania MSW
- Maszyna do piłowania Backyard Pro
- Maszyna do piłowania Royal Catering
- Maszyna do piłowania Robust
- Maszyna do piłowania Ultranatura
- Maszyna do piłowania FIXIT
- Maszyna do piłowania Einhell Bavaria
- Maszyna do piłowania MyTool
- Maszyna do piłowania Morrison
- Maszyna do piłowania Garland
- Maszyna do piłowania Prowork
- Maszyna do piłowania Donau Elektronik
- Maszyna do piłowania TAURUS Titanium
- Maszyna do piłowania Maxbear
- Maszyna do piłowania Stalco
- Maszyna do piłowania Turbo-Silent
- Maszyna do piłowania Total
Najnowsze instrukcje dla Maszyna do piłowania

12 Stycznia 2025

12 Stycznia 2025

12 Stycznia 2025

11 Stycznia 2025

11 Stycznia 2025

11 Stycznia 2025

11 Stycznia 2025

11 Stycznia 2025

11 Stycznia 2025

9 Stycznia 2025