Instrukcja obsługi Milwaukee 48-59-1808

Milwaukee Ładowarka baterii 48-59-1808

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Milwaukee 48-59-1808 (16 stron) w kategorii Ładowarka baterii. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/16
Cat. No. / No de cat.
48-59-1808
M18™ AND M12™ RAPID CHARGER
M18™ AND M12™ LI-ION BATTERY PACKS
CHARGEUR RAPIDE M18™ ET M12™
BLOCS DE BATTERIES LI-ION M18™ ET M12™
CARGADOR RÁPIDO M18™ Y M12™
BATERÍAS DE IONES DE LITIO M18™ Y M12™
OPERATOR'S MANUAL
MANUEL de L'UTILISATEUR
MANUAL del OPERADOR
WARNING To reduce the risk of injury, user must read and understand operator's manual.
AVERTISSEMENT An de réduire le risque de blessures, l'utilisateur doit lire et bien
comprendre le manuel.
ADVERTENCIA Para reducir el riesgo de lesiones, el usuario debe leer y entender el manual.
New batteries must
be charged before
rst use.
Les batteries neuves
doivent être char-
gées avant leur utili-
sation initiale.
Las baterías nuevas
se deben cargar an-
tes de usarlas por
primera vez.
2
1. S AV E T H E S E I N S T R U C T I O N S - T H I S
MANUAL CONTAINS IMPORTANT SAFE-
T Y A N D O P E R AT I N G I N S T R U C T I O N S
FOR THE MILWAUKEE LI-ION CHARGER
C AT. N O. 48-59-1808 A ND MI LWAU K EE
M12™ ™ AN D M1 8 L I- I O N B AT T E R I E S .
2. BEFORE USING THE BATTERY PACK AND
CHARGER, READ THIS OPERATOR’S MAN-
UAL, YOUR TOOL OPERATOR’S MANUAL,
AND ALL LABELS ON THE BATTERY PACK,
CHARGER AND TOOL.
3.
CAUTION
TO REDUCE THE RISK OF IN-
JURY, CHARGE MILWA UK EE
M12™ AND M18™ RECHARGEABLE LI-ION
BATTERIES ONLY IN MILWAUKEE M12™ AND
M18™ LI-ION CHARGERS. Other types of batter-
ies may burst causing personal injury and damage.
Do not wire a battery pack to a power supply plug
or car cigarette lighter. Batteries will be perma-
nently disabled or damaged.
4. USE MILWAUKEE LI-ION PACKS ONLY ON
COMPATIBLE MILWAUKEE LI-ION TOOLS.
Battery pack and charger are not compatible with
V™-technology or NiCd systems. Use with other
tools may result in a risk of re, electric shock or
personal injury.
5. AVOID DANGEROUS ENVIRONMENTS. Do not
charge battery pack in rain, snow, damp or wet
locations. Do not use battery pack or charger in
the presence of explosive atmospheres (gaseous
fumes, dust or ammable materials) because sparks
may be generated when inserting or removing bat-
tery pack, possibly causing re.
6. CHARGE IN A WELL VENTILATED AREA. Do not
block charger vents. Keep them clear to allow proper
ventilation. Do not allow smoking or open ames
near a charging battery pack. Vented gases may
explode.
7. MAINTAIN CHARGER CORD. When unplugging
charger, pull plug rather than cord to reduce the risk
of damage to the electrical plug and cord. Never
carry charger by its cord. Keep cord from heat, oil
and sharp edges. Make sure cord will not be stepped
on, tripped over or subjected to damage or stress.
Do not use charger with damaged cord or plug.
Have a damaged charger replaced immediately.
8. DO NOT USE AN EXTENSION CORD UNLESS IT
IS ABSOLUTELY NECESSARY. Using the wrong,
damaged or improperly wired extension cord could
result in the risk of re and electrical shock. If an
extension cord must be used, plug the charger
into a properly wired 16 gauge or larger extension
cord with pins that are the same number, size and
shape as the pins on the charger. Make sure that
the extension cord is in good electrical condition.
9. CHARGER IS RATED FOR 120 VOLT AC ONLY. Char-
ger must be plugged into an appropriate receptacle.
10. USE ONLY RECOMMENDED ATTACHMENTS.
Use of an attachment not recommended or sold by
the battery charger or battery pack manufacturer
may result in a risk of re, electric shock or personal
injury.
11. UNPLUG CHARGER when not in use. Remove
battery packs from unplugged chargers.
12. TO REDUCE THE RISK OF ELECTRIC SHOCK,
always unplug charger before cleaning or mainte-
nance. Do not allow water to ow into AC/DC plug.
Use a Ground Fault Circuit Interrupter (GFCI) to
reduce shock hazards.
13. DO NOT BURN OR INCINERATE BATTERY
PACKS. Battery packs may explode, causing per-
sonal injury or damage. Toxic fumes and materials
are created when battery packs are burned.
14. DO NOT CRUSH, DROP, OR DAMAGE battery
pack. Do not use a battery pack or charger that has
received a sharp blow, been dropped, run over, or
damaged in any way (e.g., pierced with a nail, hit
with a hammer, stepped on).
15. DO NOT DISASSEMBLE. Incorrect reassembly
may result in the risk of electric shock, re or ex-
posure to battery chemicals. If it is damaged, take
it to a MILWAUKEE service facility.
16. BATTERY CHEMICALS CAUSE SERIOUS
BURNS. Never allow contact with skin, eyes, or
mouth. If a damaged battery pack leaks battery
chemicals, use rubber or neoprene gloves to dis-
pose of it. If skin is exposed to battery uids, wash
with soap and water and rinse with vinegar. If eyes
are exposed to battery chemicals, immediately
ush with water for 20 minutes and seek medical
attention. Remove and dispose of contaminated
clothing.
17. DO NOT SHORT CIRCUIT. A short-circuited battery
pack may cause re, personal injury, and product
damage. A battery pack will short circuit if a metal
object makes a connection between the positive
and negative contacts on the battery pack. Do not
place a battery pack near anything that may cause
a short circuit, such as coins, keys or nails in your
pocket.
18. DO NOT ALLOW FLUIDS TO FLOW INTO BAT-
TERY PACK. Corrosive or conductive uids, such
as seawater, certain industrial chemicals, and
bleach or bleach containing products, etc., can
cause a short circuit.
19. STORE YOUR BATTERY PACK AND CHARGER
in a cool, dry place. Do not store battery pack where
temperatures may exceed 120°F (50°C) such as in
direct sunlight, a vehicle or metal building during
the summer.
20. ALWAYS USE A SIDE HANDLE when using a
HIGH OUTPUT or HIGH DEMAND battery pack
6.0 Ah or above; the output torque of some tools
may increase. If your drill/driver did not come with
a side handle, visit www. milwaukeetool.com for
the appropriate accessory handle.
IMPORTANT SAFETY INSTRUCTIONS
WARNING
READ AND UNDERSTAND ALL INSTRUCTIONS. Failure to follow all
instructions listed below, may result in electric shock, re and/or serious personal injury.
SAVE THESE INSTRUCTIONS
3
SPECIFICATIONS
Cat. No. 48-59-1808 ...............................................
Input Volts 120 AC ....................................................
Max Input Amps 2.75 AC ..........................................
Output Volts .................................................. 12 DC
18 DC
Max Output Amps 4.5 DC ........................................
6.0 DC
Recommended Ambient
Charging Temperature ................... 40°F to 105°F
M18 ™ Li-Ion Battery Packs ........................ 18 V DC
M12™ Li-Ion Battery Packs ........................ 12 V DC
FUNCTIONAL
DESCRIPTION
1. Light indicators:
Continuous red: Charging
Slow ashing green: Approaching full charge
Continuous green: Charging is complete
Fast ashing red: Battery is too hot/cold -
Charging will begin when battery reaches correct
charging temperature
Slow ashing red: Battery charge is pending -
Charging will begin when the rst pack is fully
charged
Flashing red/green: Damaged or faulty battery pack
2. Bays
3. Vents
4. Cord
5. Battery Contacts
6. Release Buttons
7. Fuel Gauge button
8. Fuel Gauge
9. Rapid charge-capable
pack indicator
3
4
6
5
5
8
9
6
6
7
21
SYMBOLOGY
Volts
Direct Current
Alternating Current
Double Insulated
Properly Recycle Batteries
BFP Backfeed Protected
California Energy Commission
Hertz
Amps
UL Listing for Canada and U.S.
M18™ AND M12™
LI-ION BATTERY PACKS
Fuel Gauge
Use the Fuel Gauge to deter
Less than 10% if bottom light
is ashing
Approximate Run
Time Remaining
78-100 %
55-77 %
33-54 %
10-32 %
mine the battery pack's re-
maining run time. Press the
Fuel Gauge button to dis-
play the lights. The Fuel
Gauge will light up for 2-3
seconds. When less than
10% of charge is left, 1 light
on the fuel gauge will ash
slowly.
NOTE: If the Fuel Gauge doesn't appear to be
working, place the battery pack on the charger and
charge as needed.
Compared to NiCd battery pack types, MILWAUKEE
Li-Ion battery packs deliver fade-free power for their
entire run time. The tool will not experience a slow,
gradual loss of power as you work. To signal the
end of discharge, 1 light on the fuel gauge will ash
quickly for 2-3 seconds and the tool will not run.
Charge the battery pack.
NOTE: Immediately after using the battery pack,
the Fuel Gauge may display a lower charge than it
will if checked a few minutes later. The battery cells
"recover" some of their charge after resting.
Battery Pack Protection
To protect itself from damage and extend its life, the
battery pack’s intelligent circuit monitors current draw
and temperature. In extremely high torque, binding,
stalling, and short circuit situations, the battery pack
will turn OFF the tool if the current draw becomes
too high. All the fuel gauge lights will ash. Release
the trigger and restart.
Under extreme circumstances, the internal tem-
perature of the battery could become too high. If
this happens, the fuel gauge lights will ash in an
alternating pattern and the tool will not run. Allow the
battery to cool down.

Specyfikacje produktu

Marka: Milwaukee
Kategoria: Ładowarka baterii
Model: 48-59-1808

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Milwaukee 48-59-1808, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Ładowarka baterii Milwaukee

Milwaukee

Milwaukee 48-59-1202 Instrukcja

15 Września 2024
Milwaukee

Milwaukee 48-59-1812 Instrukcja

6 Września 2024
Milwaukee

Milwaukee 2510-20 Instrukcja

2 Września 2024
Milwaukee

Milwaukee 48-59-1204 Instrukcja

31 Sierpnia 2024
Milwaukee

Milwaukee 48-59-2002 Instrukcja

29 Sierpnia 2024
Milwaukee

Milwaukee 48-59-2001 Instrukcja

27 Sierpnia 2024
Milwaukee

Milwaukee 48-59-1806 Instrukcja

26 Sierpnia 2024
Milwaukee

Milwaukee 48-59-0255 Instrukcja

26 Sierpnia 2024
Milwaukee

Milwaukee 48-59-1811 Instrukcja

21 Sierpnia 2024
Milwaukee

Milwaukee 48-59-1808 Instrukcja

20 Sierpnia 2024

Instrukcje Ładowarka baterii

Najnowsze instrukcje dla Ładowarka baterii

Graupner

Graupner Ultramat 12 Instrukcja

13 Stycznia 2025
Graupner

Graupner ULTRA DUO PLUS 30 Instrukcja

13 Stycznia 2025
Fuxtec

Fuxtec FX-E1LG1A Instrukcja

13 Stycznia 2025
Voltcraft

Voltcraft Charge Manager 410 Instrukcja

11 Stycznia 2025
Nitecore

Nitecore UHX1 PRO Instrukcja

11 Stycznia 2025
Envivo

Envivo ENV-1597 Instrukcja

11 Stycznia 2025
Xblitz

Xblitz XC1 Instrukcja

10 Stycznia 2025
Jackery

Jackery Explorer 240 v2 Instrukcja

7 Stycznia 2025
Jackery

Jackery Explorer 1000 v2 Instrukcja

7 Stycznia 2025
Schwaiger

Schwaiger LSET500 513 Instrukcja

7 Stycznia 2025