Instrukcja obsługi Milwaukee 2950-20

Milwaukee Ładowarka baterii 2950-20

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Milwaukee 2950-20 (20 stron) w kategorii Ładowarka baterii. Ta instrukcja była pomocna dla 7 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/20

Cat. No. / No de cat.

2950-20

OPERATOR'S MANUAL

MANUEL de L'UTILISATEUR

MANUAL del OPERADOR

WARNING To reduce the risk of injury, user must read and understand operator's manual.

AVERTISSEMENT An de réduire le risque de blessures, l'utilisateur doit lire et bien

comprendre le manuel.

ADVERTENCIA Para reducir el riesgo de lesiones, el usuario debe leer y entender el manual.

M18™ PACKOUT™ RADIO + CHARGER

M18™ PACKOUT™ RADIO + CHARGEUR

M18™ PACKOUT™ RADIO + CARGADOR

RADIO SAFETY

WARNING

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with dry cloth.

7) Do not block any ventilation openings. Install in

accordance with the manufacturer’s instructions.

8) Do not install near any heat sources such as

radiators, heat registers, stoves, or other ap-

paratus (including ampliers that produce heat.)

9) Do not defeat the safety purpose of the polarized

or grounding-type plug. A polarized plug has two

blades with one wider than the other. A ground-

ing type plug has two blades and a third ground-

ing prong. The wide blade or the third prong are

provided for your safety. If the provided plug

does not t into your outlet, consult an electri-

cian for replacement of the obsolete outlet.

10) Protect the power cord from being walked on

or pinched particularly at plugs,convenience

receptacles,and the point where they exit from

the apparatus.

11) Only use attachments/accessories specied

by the manufacturer.

12) Use only with the cart, stand, tripod, bracket,

or table specified by the manufacturer, or

sold with the apparatus. When a cart is used,

use caution when moving the cart/apparatus

combination to avoid injury from tip-over.

13) Unplug this apparatus during lightning storms

or when unused for long periods of time.

14) Refer all servicing to qualied service person-

nel. Servicing is required when the apparatus

has been damaged in any way,such as power-

supply cord or plug is damaged, liquid has

been spilled or objects have fallen into the

apparatus, the apparatus has been exposed

to rain or moisture, does not operate normally,

has been dropped, or is missing battery doors.

15)

WARNING

To reduce the risk of fire or

electric shock, do not expose

this apparatus to rain or moisture. Do not place

open ames or candles near or on the radio.

16) Only plug power supply into readily accessible out-

let to allow the appliance to be unplugged quickly.

17) Only operate this apparatus in a well-ventilated

area.

18) A battery operated radio with integral batteries or

a separate battery pack must be recharged only

with the specied charger for the battery. A char

ger that may be suitable for one type of battery may

create a risk of re when used with another battery.

19) Use battery operated radio only with speci-

cally designated battery packs. Use of any other

batteries may create a risk of re.

20) When battery pack is not in use, keep it away

from other metal objects like: paper clips,

coins, keys, nails, screws, or other small metal

objects that can make a connection from one

terminal to another. Shorting the battery terminals

together may cause sparks, burns, or a re.

21) Avoid body contact with grounded surfaces

such as pipes, radiators, ranges and refrigera-

tors. There is an increased risk of electric shock if

your body is grounded.

22) Do not use any adaptor plugs.

23) When operating a radio outside, use an outdoor

extension cord marked “W-A” or “W”. These

cords are rated for outdoor use and reduce the

risk of electric shock.

24) Never disassemble the radio or try to do any

rewiring on the radio's electrical system.

25) Do not expose this apparatus to dripping and

splashing, or place objects lled with liquids

on this unit.

26) Maintain labels and nameplates. These carry

important information. If unreadable or missing,

contact a MILWAUKEE service facility for a free

replacement.

27) This radio + charger is designed to be pow-

ered by a standard 120 volt AC line or AC

generator. The radio can also be powered using

a MILWAUKEE M18™ Li-Ion battery pack. Radio

+ charger must be plugged into an appropriate

receptacle. Do not attempt to use with any other

voltage or power supply.

CHARGER SAFETY

28) SAVE THESE INSTRUCTIONS - THIS OP-

ERATOR’S MANUAL CONTAINS IMPORTANT

SAFETY AND OPERATING INSTRUCTIONS

FOR MILWAUKEE LI-ION M18™ RADIO +

CHARGER.

29) BEFORE USING, READ THIS OPERATOR’S

MANUAL, YOUR BATTERY PACK OPERA-

TOR’S MANUAL, AND ALL LABELS ON THE

BATTERY PACK AND RADIO + CHARGER.

30) CAUTION - TO REDUCE THE RISK OF IN-

JURY, CHARGE MILWAUKEE LI-ION PACKS

ONLY IN THEIR MILWAUKEE LI-ION CHAR-

GER. Other types of chargers may cause per

sonal injury or damage. Battery pack and charger

are not compatible with ™-technology or NiCd V

systems. Do not wire a battery pack to a power

supply plug or car cigarette lighter. Battery packs

will be permanently disabled or damaged.

31) AVOID DANGEROUS ENVIRONMENTS. Do

not charge battery pack in rain, snow, damp or

wet locations. Do not use battery pack or char -

ger in the presence of explosive atmospheres

(gaseous fumes, dust or ammable materials)

because sparks may be generated when inserting

or removing battery pack, possibly causing re.

32) CHARGE IN A WELL VENTILATED AREA. Do

not block charger vents. Keep them clear to allow

proper ventilation. Do not allow smoking or open

ames near a charging battery pack. Vented gases

may explode.

33) MAINTAIN CHARGER CORD. When unplugging

charger, pull plug rather than cord to reduce the risk

of damage to the electrical plug and cord. Never car-

ry charger by its cord. Keep cord from heat, oil and

sharp edges. Make sure cord will not be stepped

on, tripped over or subjected to damage or stress.

Do not use charger with damaged cord or plug.

Have a damaged charger replaced immediately.

34) DO NOT SHORT CIRCUIT. A short circuited

battery pack may cause re, personal injury, and

product damage. A battery pack will short circuit

if a metal object makes a connection between the

positive and negative contacts on the battery pack.

IMPORTANT SAFETY INSTRUCTIONS

Do not place a battery pack near anything that may

cause a short circuit, such as coins, keys or nails

in your pocket.

35) DO NOT ALLOW FLUIDS TO FLOW INTO BAT-

TERY PACK. Corrosive or conductive uids, such

as seawater, certain industrial chemicals, and

bleach or bleach containing products, etc., can

cause a short circuit.

36) DO NOT USE AN EXTENSION CORD UNLESS IT

IS ABSOLUTELY NECESSARY. Using the wrong,

damaged or improperly wired extension cord could

result in the risk of re and electrical shock. If an

extension cord must be used, plug the charger

into a properly wired 16 gauge or larger extension

cord with pins that are the same number, size and

shape as the pins on the charger. Make sure that

the extension cord is in good electrical condition.

37) USE ONLY RECOMMENDED ATTACHMENTS.

Use of an attachment not recommended or sold

by the battery charger or battery pack manufac-

turer may result in a risk of re, electric shock or

personal injury.

38) UNPLUG CHARGER when not in use. Remove

battery packs from unplugged chargers.

39) TO REDUCE THE RISK OF ELECTRIC SHOCK,

always unplug charger before cleaning or main-

tenance. Use a Ground Fault Circuit Interrupter

(GFCI) to reduce shock hazards.

40) STORE YOUR BATTERY PACK AND CHARGER

in a cool, dry place. Do not store battery pack

where temperatures may exceed 120°F (50°C)

such as in direct sunlight, a vehicle or metal build-

ing during the summer.

Federal Communications Commission

WARNING

Changes or modications to

this unit not expressly ap-

proved by the party responsible for compli-

ance could void the user’s authority to operate the

equipment.

This equipment has been tested and found to

comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These lim-

its are designed to provide reasonable protection

against harmful interference in a residential instal-

lation. This equipment generates, uses and can

radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may

cause harmful interference to radio communications.

However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does

cause harmful interference to radio or television recep-

tion, which can be determined by turning the equipment

o and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and

receiver.

• Connect the equipment into an outlet on a circuit

dierent from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV

technician for help.

EXTENSION CORDS

Double insulated tools can use either a two or three

wire extension cord. As the distance from the sup-

ply outlet increases, you must use a heavier gauge

extension cord. Using extension cords with inad-

equately sized wire causes a serious drop in voltage,

resulting in loss of power and possible tool damage.

Refer to the table shown to determine the required

minimum wire size.

The smaller the gauge number of the wire, the greater

the capacity of the cord. For example, a 14 gauge

cord can carry a higher current than a 16 gauge cord.

When using more than one extension cord to make

up the total length, be sure each cord contains at

least the minimum wire size required. If you are using

one extension cord for more than one tool, add the

nameplate amperes and use the sum to determine

the required minimum wire size.

Guidelines for Using Extension Cords

• If you are using an extension cord outdoors, be sure

it is marked with the sux “W-A” (“W” in Canada) to

indicate that it is acceptable for outdoor use.

• Be sure your extension cord is properly wired and in

good electrical condition. Always replace a damaged

extension cord or have it repaired by a qualied

person before using it.

• Protect your extension cords from sharp objects,

excessive heat and damp or wet areas.

• Unplug all cords during lightning storms or when

unused for long periods of time.

Recommended Minimum Wire Gauge

For Extension Cords*

Nameplate Amps

Extension Cord Length

25' 50' 75' 100' 150'

0 - 2.0

2.1 - 3.4

3.5 - 5.0

5.1 - 7.0

7.1 - 12.0

12.1 - 16.0

16.1 - 20.0

* Based on limiting the line voltage drop to ve volts at 150%

of the rated amperes.

CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE COVER (OR BACK). NO

USER-SERVICABLE PARTS INSIDE. REFER SERVICI-

ING TO QUALIFIED SERVICE PERSONNEL.

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION

- The lightning ash with arrowhead symbol, within an equi

lateral triangle, is intended to alert the user to the presence

of uninsulated "dangerous voltage" within the product's

enclosure that may be of sucient magnitude to constitute

a risk of electric shock to persons.

- The exclamation point within an equilateral triangle is in

tended to alert the user to the presence of important operat-

ing and maintenance (servicing) instructions in the literature

accompanying the appliance.

Specyfikacje produktu

Marka:	Milwaukee
Kategoria:	Ładowarka baterii
Model:	2950-20

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Milwaukee 2950-20, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Ładowarka baterii Milwaukee

Milwaukee 48-59-1202 Instrukcja

15 Września 2024

Milwaukee 48-59-1812 Instrukcja

6 Września 2024

Milwaukee 2510-20 Instrukcja

2 Września 2024

Milwaukee 48-59-1204 Instrukcja

31 Sierpnia 2024

Milwaukee 48-59-2002 Instrukcja

29 Sierpnia 2024

Milwaukee 48-59-2001 Instrukcja

27 Sierpnia 2024

Milwaukee 48-59-1806 Instrukcja

26 Sierpnia 2024

Milwaukee 48-59-0255 Instrukcja

26 Sierpnia 2024

Milwaukee 48-59-1811 Instrukcja

21 Sierpnia 2024

Milwaukee 48-59-1808 Instrukcja

20 Sierpnia 2024

Instrukcje Ładowarka baterii

Najnowsze instrukcje dla Ładowarka baterii

Graupner Ultramat 12 Instrukcja

13 Stycznia 2025

Graupner ULTRA DUO PLUS 30 Instrukcja

13 Stycznia 2025

Fuxtec FX-E1LG1A Instrukcja

13 Stycznia 2025

Voltcraft Charge Manager 410 Instrukcja

11 Stycznia 2025

Nitecore UHX1 PRO Instrukcja

11 Stycznia 2025

Envivo ENV-1597 Instrukcja

11 Stycznia 2025

Xblitz XC1 Instrukcja

10 Stycznia 2025

Jackery Explorer 240 v2 Instrukcja

7 Stycznia 2025

Jackery Explorer 1000 v2 Instrukcja

7 Stycznia 2025

Schwaiger LSET500 513 Instrukcja

7 Stycznia 2025