Instrukcja obsługi Midland 9001z

Midland radio 9001z

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Midland 9001z (11 stron) w kategorii radio. Ta instrukcja była pomocna dla 21 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/11

www.midlandradio.com

9001z

INDEX

Thank You ................................................................................................................................................................................ 2

Major 9001z Features ........................................................................................................................................................... 2

Installation ........................................................................................................................................................................... 2-3

CB Antenna ............................................................................................................................................................................. 3

9001z Features and Controls .............................................................................................................................................4

Feature Operation .................................................................................................................................................................5

How to Operate Your CB ...................................................................................................................................................6

Technical Speciﬁcations ........................................................................................................................................................7

Limited Warranty ...................................................................................................................................................................7

Limitation of Liability ............................................................................................................................................................7

Service and Technical Support ........................................................................................................................................8

Accessories ........................................................................................................................................................................8

Accessories Order Form ................................................................................................................................................9

Other Midland Products ............................................................................................................................................... 10

www.midlandradio.com

Thank you

Congratulations on your purchase of a state-of-the-art

Midland 9001z mobile CB radio. In the years ahead, you can

expect to realize time and again why Midland holds the front

running position among CB users everywhere. You will come

to know that American Original is not just a slogan, but the

heading of long list of hearable, seeable beneﬁts. As

your Midland CB experience unfolds and grows we hope you

will remember that CB radios are only one kind of electronic

excellence available under the Midland name. Your 40 channel

CB radio represents the state of the art in high tech enginee-

ring. The unit incorporates microprocessor

controlled PLL circuitry for precise tuning. The 9001z is a

classic style CB with the innovative Guardian alert feature

that is skillfully constructed with the ﬁnest components.This

radio is designed for reliable and trouble-free performance

for years to come. Enjoy!

Midland Radio Corporation

Hereby certiﬁes that this unit has

been designed, manufactured,

FCC type accepted and certiﬁed

in accordance with part 95 and

Part 15, Subpart C of the current

FCC rules and regulations as of

the date of manufacture.

• 40 CB Channels

• 4 Watt Output Power

• Guardian Alert

• Weather Scan

• XTRA TALK Mic Control

• Instant Channel 9/19

• RF Gain

• Switchable Noise Blanker(NB)

• Delta Tune

• SWR Calibration

• XR Technology

• Automatic Noise Limiter(ANL)

• PA Function

• Last Channel Memory

• Push to talk ergonomically designed microphone

• 9 ft coil Mic cord

• Includes mounting bracket/hardware and fuse

DC power cord

Major 9001z Features

Installation

This transceiver may be installed in any 12-volt negative

ground-system car or truck. Most current U.S. and Foreign

vehicles use a negative system, but some older models

and some newer large trucks may have a positive ground.

Check the requirements for your vehicle before you begin

installation. Generally, you have a negative-ground system if

the minus (-) battery terminal is connected to the motor

block. Contact your dealer in the event you are unable to

determine your vehicle’s polarity system.

Location

Your new Midland CB is designed to be installed under the

dash or vertically on a console of your vehicle. Safety and

convenience are the primary considerations in deciding

exactly where to locate your radio.

Caution: Be sure that the unit is located so that it does

not interfere with the driver, supplemental restraint

systems (air bags), or impair access to any controls.

Connecting cables must be routed and secured in such a

manner as not to interfere with the operation of the brake,

accelerator or other controls. Interference from either

the unit or connecting cables may contribute to the loss of

control of the vehicle.

Mechanical Mounting

Step 1: Plug power cable into back of radio marked

“Power”. Be sure to observe polarity markings.

Step 2: Use the mounting bracket as a template for

marking the location of screw holes under the dash. Use

a nail or other sharp pointed object to mark the hole

locations.

Step 3: Drill a ‘1/8” hole for each screw hole in the

mounting bracket. Attach the bracket to the dash with the

Phillips head sheet metal screws provided.

NOTE: Extreme care should be exercised when

drilling into the dash to avoid damage to under-

dash electronic ignition, cruise control, instrument

and/ or accessory wiring.

Step 4: Attach removable 3-pin plug-in DC cord to polari-

zed DC jack on the rear of the transceiver.

Step 5: Locate and secure the radio into the mounting

bracket, allowing working space for later power

connections.

www.midlandradio.com

9001z

Installation Cont...

Power Wiring (negative ground only)

Step 1: If you have not determined whether your vehicle has a

negative or positive ground, do so now. Then disconnect

the negative lead from the battery to prevent short

circuits that can occur during wiring. Do not connect this

transceiver to positive ground electrical systems.

Step 2: With negative ground:

A. Connect the positive (RED WIRE) the one with

in-line fuse holder to either the

( a ) fuse block

( b ) cigarette lighter or

( c ) directly to the positive post on your battery.

Usually, the fuse block is the most convenient connecting

point. It is also possible to connect to the accessory

terminal on the fuse block or ignition switch, so that your

CB automatically goes off when the ignition goes off.

B. Then tightly connect the ground (BLACK WIRE)

directly to the vehicle’s metal frame. A good direct

metal-to-metal ground is essential for optimum

performance.

Mounting the Main Unit

Step 1: Loosen the retaining knobs on each side of the

mounting bracket to give enough space for the unit to slide

between the two bracket arms.

Step 2: Position the main unit between the bracket arms in

line with the retaining knobs. Set the height and angle for

optimum operating comfort and accessibility.

Step 3: Tighten the retaining knobs.

Installation of Microphone Hanger

Mounting holes are provided on the microphone hanger bracket.

The bracket can be attached to the vehicle dash or other

convenient location.

CB Antenna

How to Select, Position, Install and Tune the Right

One for You

Basically, you may choose from two types of mobile CB

antennas - full-length whip and loaded whip - and a

variety of mounts (depending on where you locate your

antenna). Midland markets a line of high-performance

antennas. Visit our website at www.midlandradio. com

to check out the selection.

Where You Locate your Antenna Does Make a

Difference.

Some general rules for antenna location that can aid CB

performance:

1. Put your mount as high on the vehicle as possible.

The higher the proportion of antenna length that is

above the roof, the better.

2. If possible, mount the antenna in the center of whatever

surface you choose.

3. Keep antenna cables away from noise sources such as

the ignition system, gauges, etc.

4. Make sure you have a solid metal-to-metal ground.

5. Exercise care to prevent cable damage.

Essentially, you have ﬁve location choices: the roof, gutter,

rear deck, front cowl or rear bumper. Where you decide

to locate your antenna will determine the type of antenna

needed.

Antenna Installation:

Follow the manufacturer’s installation instructions carefully.

-Warning: Never operate your CB radio without

attaching an antenna or with a broken antenna cable. This

will result in damage to transmitter circuitry.

-Safety notice: The antenna used for this radio must be

installed to provide a separation distance of at least 34

cm ( in.) from all persons and must not be collocated14

or operating in conjunction with any other antenna or

transmitter.

Tuning your Antenna

Some antennas are factory tuned. However, performance

can usually be improved by slightly lengthening or shorte-

ning its length, using a Standing Wave Radio (SWR) meter.

For the exact procedures to be used refer to the antenna

manufacturer’s installation manual.

Specyfikacje produktu

Marka:	Midland
Kategoria:	radio
Model:	9001z
Waga produktu:	1361 g
Wymiary produktu (SxGxW):	158.7 x 260.3 x 53.97 mm
Częstotliwość (MHz):	26.965 - 27.405 MHz
Ilość kanałów (ogółem):	40 kan.