Instrukcja obsługi Micca MB42

Micca głośnik MB42

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Micca MB42 (2 stron) w kategorii głośnik. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/2
Home Audio Products
Micca MB42 4-Inch 2-Way Loudspeaker
Thank you for purchasing the Micca MB42
Bookshelf Speaker! This product has been
designed for optimal audio reproduction
performance in a variety of home
entertainment congurations, with accuracy,
clarity, and impact that discerning
audiophiles listen for.
Please take the time to become familiar with
the MB42 and the placement options as
detailed in this manual.
General Recommendations
Height - For stereo listening from a xed
listening area, the MB42 should ideally be
placed at the ear-level of the listener, with the
listener comfortably situated in the listening
location.
Separation - The distance between a pair of
MB42 speakers should be shorter than the
distance from the speakers to the listener. Tilt
the two speakers inward toward the listener
slightly for best results.
Orientation - The speakers provide the best
results in its normal vertical orientation. When
the speakers are placed much higher or much
lower than the recommended ear-level height,
the speakers can be placed on its side to
provide better o-axis performance in these less
than optimal placements.
Usage-Specic Recommendations
Bookshelf Speakers
When placed on bookshelves, it is important to
keep both speakers at the same height. Avoid
placing the speakers at dierent heights as this
will degrade the sound. Speaker height should
be selected so that it is as close to ear level as
possible while considering whether listeners will
be seated or standing in the listening area.
Stereo Speaker on Stands
When used with speaker stands, it is important
to select speaker stands that place the speakers
to the ear level of the listener. Do this by
measuring the height of the listener’s ear when
seated in the listening area, and subtracting 6
inches. For example, if the listener’s ear is
measured at 36 inches from the oor when
seated, select speaker stands that are
approximately 30 inches high.
Desktop Near-eld Monitor
The MB42 can be used as desktop/near-eld
monitor speakers, such as when placed to the
either side of a display or mixing console. If the
MB42 cannot be located near ear level, Monitor
isolation wedges like the Auralex MoPAD, as
well as inexpensive alternatives, can be used to
slightly tilt back the speakers, and to decouple
the speakers from the desk surface. Be aware
that the MB42 is not shielded and thus should
not be placed in proximity to CRT displays or
other magnetic-sensitive equipment.
Speaker Wire
The MB42 should be connected to the amplier
with good quality oxygen-free copper speaker
wire for best performance.
The gauge or thickness of the speaker wire can
aect the performance of the MB42. Always
choose a speaker wire of the appropriate gauge
to prevent excessive speaker wire resistance.
Using undersized speaker wire can result in lose
of volume, detail, and dynamic range. Please
select speaker wire for the MB42 based on the
following minimum recommendations:
50' or less - 16 Gauge 2 Conductor
50' - 80' - 14 Gauge 2 Conductor
80'-120' - 12 Gauge 2 Conductor
120'-200' - 10 Gauge 2 Conductor
Amplier Connection
Amplier speaker output terminals are typically
color coded with black for negative (-) and red
for positive (+). Similarly, the MB42 has speaker
wire terminals with a black and red color coding.
When connecting speaker wire, ensure that the
positive terminal on the amplier is connected to
the positive terminal on the MB42. And similarly,
the negative terminal on the amplier should be
connected to the negative terminal on the MB42.
Speaker wires typically use at least one of
several possible methods to help maintain
correct polarity, including color coded insulation
or conductor strands, or printing of text and
symbols along one side of the wire insulation.
Amplier Considerations
The MB42’s impedance varies between 4 to 8
Ohms. Care must be taken to ensure that the
amplier is capable of handling a 4-Ohm load.
Some ampliers have a switch that must be set
to select a 4-Ohm compatible operation mode.
Improper amplier selection or setup may result
in permanent damage to the amplier or speaker.
The MB42 can be used with ampliers between
15 to 100 watts per channel as long as
reasonable care is exercised. If there is audible
distortion, turn down the volume until the
distortion goes away. Never allow the speaker
and amplier to play for more than a few
seconds when there is audible distortion.
Removing the Grill
The MB42 has a removable grill that is held in
place by four friction pegs. To remove the grill,
carefully pry the grill o from edge until the
friction pegs are fully disengaged. To avoid
damaging the speaker drivers, do not touch
them either with or without the grill in place.
The MB42 can be used without the grills
installed as long as care is taken to prevent the
drivers from damage such as by hard/sharp
objects, liquids, pets, or hands. Store the grills in
a safe dry place when not in use.
MB42 Specications
Woofer: 4” Carbon Fiber Cone with Rubber Surround
Tweeter: 0.75” Silk Dome
Enclosure: Ported Cabinet
Frequency Response: 60Hz-20kHz (Typical In-Room)
Impedance: 4-8 Ohms
Sensitivity: 85dB 1W/1M
Power Handling: 75 Watts (Each)
Dimensions: 9.5” (H) x 5.8” (W) x 6.5” (D)
Information in this manual is believed to be accurate and reliable but Micca Ltd assumes no responsibility for its use nor for any
infringement of patents or other rights of third parties which may result from the use of this manual or the product. Micca
reserves the right to change product specications at any time without notice.
Micca, MB42, and the Micca logo are trademarks of Micca Ltd. Other trademarks referenced in this manual are the properties of
their respective owners.
© 2012-2013 Micca Ltd. All rights reserved.

Specyfikacje produktu

Marka: Micca
Kategoria: głośnik
Model: MB42

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Micca MB42, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje głośnik Micca

Micca

Micca MB42 Instrukcja

25 Września 2024

Instrukcje głośnik

Najnowsze instrukcje dla głośnik

Teufel

Teufel Rockster Air Instrukcja

15 Października 2024
Alpine

Alpine PSS-22WRA Instrukcja

15 Października 2024
Bauhn

Bauhn APPS-0724 Instrukcja

15 Października 2024
Aiwa

Aiwa SP-A100 Instrukcja

15 Października 2024
Harman Kardon

Harman Kardon Citation One Instrukcja

14 Października 2024
Alpine

Alpine 30MC Instrukcja

14 Października 2024
Magnat

Magnat Needle 9000 ALU Instrukcja

14 Października 2024
Pioneer

Pioneer SP-T22A-LR Instrukcja

14 Października 2024
Sharp

Sharp PS-932 Instrukcja

14 Października 2024
Pyle

Pyle PDWR64BTW Instrukcja

13 Października 2024