Instrukcja obsługi Meridian DSP7200 S

Meridian Speaker DSP7200 S

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Meridian DSP7200 S (44 stron) w kategorii Speaker. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/44
Meridian DSP Loudspeaker
User Guide
ii
Preface
Important safety instructions
Read the instructions.
Keep these instructions.
Follow all instructions.
Do not use this apparatus near water.
Clean only with a dry cloth.
Install only in accordance with the manufacturer’s
instructions.
Refer all servicing to approved service personnel.
Do not disassemble no user-servicable parts inside.
This apparatus has been designed with Class 1
construction and must be connected to a mains socket
outlet with a protective earthing connection (the third
grounding pin).
The apparatus may be isolated from mains power either
by unplugging the power connector from the rear of the
unit, or by unplugging the connector at the opposing
end of the power cord or cable from its supply outlet.
As a result, either or both of these connectors should
remain accessible.
Safety warnings
WARNING: TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPARATUS TO RAIN OR MOISTURE.
Do not expose the unit to dripping or splashing.
Do not place any object filled with liquid, such as a
vase, on the unit.
Do not place naked flame sources, such as lighted
candles, on the unit.
To avoid overheating
Leave at least 10cm around the equipment to ensure
sufficient ventilation.
Do not position the unit:
In direct sunlight.
Near heat sources, such as a radiator.
Directly on top of heat producing equipment.
To avoid interference
Do not position the unit:
Near strong electrical or magnetic radiation, such as
near a power amplifier.
Radio interference
FCC Warning: This equipment generates and can
radiate radio frequency energy and if not installed and
used correctly in accordance with our instructions may
cause interference to radio communications or radio
and television reception. It has been type-tested and
complies with the limits set out in Subpart J, Part 15 of
FCC rules for a Class B computing device. These limits
are intended to provide reasonable protection against
such interference in home installations.
EEC: This product has been designed and type-tested
to comply with the limits set out in EN55013 and
EN55020.
iii
Contents
Contents
Introduction 1
Meridian DSP loudspeakers 2
Sample configurations 4
DSP5200 and DSP5200HC 7
Unpacking 8
Specifications 10
DSP7200 and DSP7200HC 11
Unpacking 12
Specifications 14
Connecting up the DSP loudspeakers 15
Connecting the loudspeakers 16
Connecting to other equipment 17
Using the DSP loudspeakers 21
Selecting a source 22
Changing the display 23
Adjusting the volume 24
Changing the treble, bass, or phase 25
Changing the listening position 26
Configuring the DSP loudspeakers 27
Choosing standard settings 28
Specifying information about your system 30
Configuring the sources 33
Troubleshooting 35
Troubleshooting 36
Cleaning 37
Service and guarantee 38
Index 39

Specyfikacje produktu

Marka: Meridian
Kategoria: Speaker
Model: DSP7200 S

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Meridian DSP7200 S, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Speaker Meridian

Meridian

Meridian DSP7200 S Instrukcja

1 Października 2024
Meridian

Meridian DSP7200.2HC Instrukcja

1 Października 2024
Meridian

Meridian DSP5200HC Instrukcja

1 Października 2024
Meridian

Meridian DSP3200 Instrukcja

1 Października 2024
Meridian

Meridian DSP5200 Instrukcja

1 Października 2024

Instrukcje Speaker

Najnowsze instrukcje dla Speaker

Mission

Mission ZX-5 Instrukcja

1 Października 2024
Audibax

Audibax Party 12 Instrukcja

1 Października 2024
Audibax

Audibax Ground 6T Instrukcja

1 Października 2024
DAP-Audio

DAP-Audio CS-36 Instrukcja

1 Października 2024
Mission

Mission ZX-1 Instrukcja

1 Października 2024
Audibax

Audibax PR42T Instrukcja

1 Października 2024
Mission

Mission QX-1 MKII Instrukcja

1 Października 2024