Instrukcja obsługi McIntosh MCLK12

McIntosh zegar MCLK12

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla McIntosh MCLK12 (16 stron) w kategorii zegar. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/16
McIntosh Laboratory, Inc. 2 Chambers Street Binghamton, New York 13903-2699 Phone: 607-723-3512 www.mcintoshlabs.com
MCLK12
Analog Clock
Owner’s Manual
2
The lightning ash with arrowhead, within an equilateral
triangle, is intended to alert the user to the presence of
uninsulated “dangerous voltage” within the product’s en-
closure that may be of sufcient magnitude to constitute
a risk of electric shock to persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the
literature accompanying the appliance.
WARNING - TO REDUCE RISK
OF FIRE OR ELECTRICAL
SHOCK, DO NOT EXPOSE
THIS EQUIPMENT TO RAIN OR
MOISTURE.
NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO
QUALIFIED PERSONNEL.
To prevent the risk of electric
shock, do not remove cover or
back. No user-serviceable parts
inside.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install
in accordance with the manufacturer’s instruc-
tions.
8. Do not install near any heat sources such as
radiators, heat registers, stoves, or other appa-
ratus (including ampliers) that produce heat.
9. Do not defeat the safety purpose of the polar-
ized or grounding-type plug. A polarized plug
has two blades with one wider than the other.
A grounding type plug has two blades and a
third grounding prong. The wide blade or the
third prong are provided for your safety. If
the provided plug does not t into your outlet,
consult an electrician for replacement of the
obsolete outlet.
10. Protect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where they exit
from the apparatus.
11. Only use attachments/accessories specied by
the manufacturer.
12. Use only with the cart, stand, tripod, bracket,
or table specied by the manu-
facturer, or sold with the appa-
ratus. When a cart is used, use
caution when moving the cart/
apparatus combination to avoid
injury from tip-over.
13. Unplug this apparatus during lightning storms
or when unused for long periods of time.
14. Refer all servicing to qualied service person-
nel. Servicing is required when the apparatus
has been damaged in any way, such as power-
IMPORTANT SAFETY
INSTRUCTIONS!
PLEASE READ THEM BEFORE
OPERATING THIS EQUIPMENT.
supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or
has been dropped.
15. Do not expose this equipment to dripping or
splashing and ensure that no objects lled
with liquids, such as vases, are placed on the
equipment.
16. To completely disconnect this equipment from
the a.c. mains, disconnect the power supply
cord plug from the a.c. receptacle.
17. The mains plug of the power supply cord shall
remain readily operable.
18. Do not expose batteries to excessive heat such
as sunshine, re or the like.
19. Connect mains power supply cord only to a
mains socket outlet with a protective earthing
connection.
3
The life of the Lithium Battery used in the McIntosh
Clock is approximately the shelf life of the battery
(10 - 15 years). However, it is advisable to remove the
battery from the MCLK12 when the clock is not con-
nected to AC Power for an extended period of time.
This will help to extend battery life and avoid possible
damage to the clock.
Perform the following steps to remove the battery
from the clock:
1. Disconnect the AC Power Cord from the Rear
panel of the McIntosh MCLK12 Clock. Refer to
figure 1.
2. Press the tab and lift up on the Backup Battery
Cover and temporarily place it aside. Refer to
figure 2.
3. Refering to figure 7,
use a small pocket
size screw driver (or
other suitable tool)
and carefully insert
the tip of the tool be-
tween the metal tab
of the battery socket
and the left side of
the battery. Then ro-
tate the tool to release the battery from the socket.
Remove the battery from inside of the clock.
5. Reinstall the Backup Battery Cover. Refer to
figure 6.
6. Store the battery in a cool dry place for
future use or dispose of the battery in
accordance with the local regulations
for lithium battery disposal. Batteries
should never be thrown away or inciner-
ated.
The McIntosh MCLK12 Analog Clock uses a long
life Lithium Coin Cell type battery. The MCLK12
will function without a battery when connected to AC
Power. However, the battery will keep the current time
in the event there is an interruption of AC Power and
thus prevents the necessity of having to reset the cor-
rect time when AC Power is restored. The MCLK12
may be supplied with a battery depending on the
country where the MCLK12 is purchased. When pur-
chasing a battery for use in the MCLK12 refer to the
following list:
Approved Lithium Batteries
Brand IEC No. ANSI/NEDA No.
Energizer CR203215004LC1
Panasonic CR2032(PA/1B)15004LC1
Access to the recessed battery compartment is located
on the Rear Panel of the MCLK12. Refer to figure 1.
Perform the following steps to install the battery:
1. Press the tab and lift up on the Backup Battery
Cover and temporarily
place it aside. Refer to
figure 2.
2. Remove the CR2032
Battery from its pack-
aging.
3. Orient the battery so
the + symbol (en-
graved into one side of the battery) is facing up.
4. Refering to figures 3, 4 and 5 insert the battery
into the socket. Make
sure the right side of the
battery is seated under
the two retaining tabs of
the socket before press-
ing down on the left side
of the battery.
5. Reinstall the Backup
Battery Cover. Refer
to figure 6.
6. The MCLK12 Analog
Clock is now ready
for installation, con-
nection and opera-
tion.
Battery Installation and Replacement
Battery Installation
BACKUP
BATTERY
Figure 2
Battery
Socket
Figure 3
CR2032
3V
Tabs
Figure 4
CR2032
3V
Figure 5
BACKUP
BATTERY
Figure 6
CR2032
3V
Figure 7
Battery Removal
CAUTION:
Danger of explosion if the battery is in-
correctly installed. Only install one of the
approved Lithium Batteries listed below.
BACKUP
BATTERY
Figure 1
Battery
Compartment
1
CR Lithium Coin Cells contain Perchlorate Material - special handling
may apply. For additional information go to www.dtsc.ca.gov/hazaedous
waste/perchlorate/index.cfm

Specyfikacje produktu

Marka: McIntosh
Kategoria: zegar
Model: MCLK12

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z McIntosh MCLK12, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje zegar McIntosh

McIntosh

McIntosh MCLK12 Instrukcja

25 Sierpnia 2024

Instrukcje zegar

Najnowsze instrukcje dla zegar

Oregon Scientific

Oregon Scientific PrysmaChrome BAR292A Instrukcja

15 Grudnia 2024
Oregon Scientific

Oregon Scientific CIR100 Instrukcja

15 Grudnia 2024
TFA

TFA 60.4512.01 Instrukcja

14 Grudnia 2024
Emos

Emos P5507 Instrukcja

11 Grudnia 2024
TFA

TFA 60.3522.02 Instrukcja

8 Grudnia 2024
TFA

TFA 60.3545.02 Instrukcja

8 Grudnia 2024
TFA

TFA 60.3542.02 Instrukcja

8 Grudnia 2024
TFA

TFA 60.3050.01 Instrukcja

8 Grudnia 2024
TFA

TFA 60.3547.20 Instrukcja

8 Grudnia 2024
TFA

TFA 60.3044.02 Instrukcja

8 Grudnia 2024