Instrukcja obsługi MB Quart pab 1200 1 d

MB Quart Radia samochodowe pab 1200 1 d

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla MB Quart pab 1200 1 d (88 stron) w kategorii Radia samochodowe. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/88

MAXXSONICS USA, INC.

1290 Ensell Road

Lake Zurich, Illinois 60047 USA

E-Mail info@maxxsonics.com

Website www.maxxsonics.com

MAXXSONICS EUROPE GMBH

Neckarstrasse 20

74847 Obrigheim, Germany

Phone +49 (0) 62 61 - 6 38-0

FAXX +49 (0) 62 61 - 6 38-129

E-Mail info@mbquart.de

Website www.mbquart.de

PAB 2100 / PAB 4100 / PAB 5400 / PAB 1200.1 D

Congratulations!

By purchasing an ampliﬁ er from MB QUART, you have decided on a

product of the highest technical quality. MB QUART wishes you great

enjoyment with your ampliﬁ er.

Should you have any questions about

this system or other MB QUART products, please call us personally or

send us an e-mail at info@mbquart.de

Herzlichen Glückwunsch!

Mit dem Kauf eines Verstärkers aus dem Hause MB QUART haben

Sie sich für ein Produkt höchster technischer Qualität entschieden.

MB QUART wünscht Ihnen viel Vergnügen mit Ihrem Verstärker.

Wenn Sie Fragen zu dieser Anlage oder anderen MB QUART-

Produkten haben, freuen wir uns über Ihren Anruf oder eine E-Mail

an info@mbquart.de

Félicitations!

Vous venez d‘acquérir en achetant un ampliﬁ cateur de la maison

MB QUART un produit de grande valeur sur le plan technique et qua-

litatif. MB QUART vous souhaite beaucoup de plaisir avec votre am-

pliﬁ cateur. Si vous avez des questions concernant cette installation

ou sur l‘un des autres produits de la maison MB QUART, veuillez nous

téléphoner ou nous envoyer un mail à l‘adresse info@mbquart.de

¡Enhorabuena!

Con la compra de un ampliﬁ cador MB QUART se ha decidido por un

producto de la más alta calidad técnica. MB QUART le desea mucho

éxíto con su ampliﬁ cador. En caso que tenga preguntas sobre esta

instalación u otros productos de MB QUART llámenos por teléfono o

mándenos una noticia por correo electrónico info@mbquart.de

Congratulazioni!

Acquistando un ampliﬁ catore della MB QUART avete scelto un pro-

dotto ai massimi livelli tecnici di qualità. La MB QUART Vi augura

grande piacere d’uso del Vostro ampliﬁ catore. In caso di domande

sul presente sistema o su altri prodotti MB QUART siete pregati

di contattarci personalmente o di mandarci un’eMail all’indirizzo

info@mbquart.de

Примите наши сердечные поздравления!

Купив усилитель фирмы MB QUART,

вы выбрали превосходное по

техническим данным и качеству изделие

Фирма MB QUART желает вам

получить огромное удовольствие при использовании вашего усилителя

Если у вас появятся вопросы по этому устройству или другим изделиям

фирмы MB QUART, будем рады вашему звонку по телефону или вашему

сообщению по электронной почте info@mbquart.de

Installation & Operation

Einbau und Betrieb

Installation et fonctionnement

Instal

aci

n y funcionamient

Installazione e funzionamento

PREMIUM

Amplifier

Verstärker

Amplificateurs

Amplificador

Amplificatore

Усилитель

WARRANTY

GENERAL INSTALLATION NOTES

System design

Installation

AMPLIFIER FEATURE DESCRIPTION

AB 2100

-Channel Amplifier

AB 4100

-Channel Amplifier

AB 5400

-Channel Amplifier

AB 1200.1 D

Mono Amplifier

AMPLIFIER

APPLICATIONS

AB 2100

PAB 2100 P

-Channel Amplifier

Full range stereo

Full range

Stereo high pass with mono low-pass in

a 2 way active, or bi-ampliﬁ ed system

AB 4100

PAB 4100 P

-Channel Amplifier

channel full range system

2 or 3 channel full range system

2 way active, or bi-ampliﬁ ed system

with mono bass

2 way active, or bi-ampliﬁ ed system

with mono bass, and faded highs/lows

Front/rear high pass, using a 2 channel

ampliﬁ er for mono sub bass

AB 5400

PAB 5400 P

-Channel Amplifier

5 channel discrete, one being mono low pass

3 or 4 channel discrete, one being mono low pass

3 way active, with mono bass

Front/rear high pass, with constant

sub bass

AB 1200.1 D

PAB 1200.1 D P

Mono Amplifier

Basic application

AFTER INSTALLATION

Setting up systems after installation for best performance

Troubleshooting a system

14-15

TECHNICAL DATA

Index

ENGLISH

As the manufacturer of MB QUART

car audio products, Maxxsonics

USA Inc. and Maxxsonics Europe GmbH warrants to the original

consumer purchaser the ampliﬁ er to be free from defects in material

and workmanship for one (1) year from date of purchase.

This product meets the current EU minimum warranty requirements,

if purchased in countries of the EU.

To ensure your warranty policy keep your original receipt prooﬁ ng

the date of

purchase.

All other part and accessories of the system are warrantied to be

free from defects in material and workmanship for one (1) year from

date of purchase. Maxxsonics will repair or replace at it’s option and

free of charge during the warranty period, any system component

that proves defective in materials and workmanship under normal

installation, use and service provided that the product is returned

to the authorised MB QUART dealer from where it was purchased.

Warranty

A photo copy of the original receipt must accompany the product

being returned. In the absence of the above, the warranty is one (1)

year from date of manufacture.

Any damage to the product as a result of misuse, abuse, accident,

incorrect wiring, improper installation, alteration of date code or bar

code labels, revolution, natural disaster, or any sneaky stuff because

someone messed up, repair or alteration out side of our factory or

authorised service centers and any thing else you have done that you

should not have done is not covered.

This warranty is limited to defective parts and speciﬁ cally excludes

any incidental or consequential damages connected therewith. This

warranty is not to be construed as an insurance policy.

Warranty on installation labor, removal, re-installation and freight

charges are not the responsibility of Maxxsonics USA Inc. or

Maxxsonics Europe GmbH.

English

System design

GENERAL INSTALLATION NOTES

Installation

The success of any car stereo system relies on several factors, such as the system design, execution of the installation, and system setup.

This section is intended to assist the installer by offering several tips and hints about good installation practice. Please remember that any

system is only as good as its weakest link.

Determine the system format, e.g., single ampliﬁ er, active, front/rear and so on. Then choose the ampliﬁ er power points according to personal

taste. Please remember that higher power systems are not necessarily useful purely for high sound pressure levels, but also to establish a headroom

capability, to reproduce musical peaks cleanly without distortion. Lower power ampliﬁ ers will clip earlier than their more powerful cousins, and

cause loudspeaker failure when overdriven, due to the harmonics generated by a clipped signal, thus overheating voice coils.

Choose loudspeaker and ampliﬁ er mounting locations. Loudspeaker location is always a matter of compromise between space and sound stage

imaging. Ampliﬁ ers should be mounted with the ﬁ ns running vertically for best convection cooling, to minimize overheating.

Purchase the best quality RCA cables you can afford, for reliability and less engine noise interference in the audio system.

General:

Mount the ampliﬁ er/s in the chosen location.

Run the wiring so that RCA cables are at least 18“ away from power and speaker cables. Keep RCA cables away from electrical devices in the vehicle

that can cause electrical noise, such as fuel pumps.

Power and ground connections:

Use a sufﬁ cient gauge power cable, at least #8 per ampliﬁ er. In a multi ampliﬁ er system, it is advisable to mount a large enough fuse right at the

battery, and run a master +12 volt power cable to a fused distribution block near the ampliﬁ ers. It is then a simple matter to connect the +12 volt

terminal of each ampliﬁ er to the distribution block.

Ground each ampliﬁ er with as short a ground lead, again at least #8 gauge, directly to the vehicle chassis. Use a ground distribution block, if you

wish, but it is extremely important to keep the main ground lead from this distribution block to the chassis as short as possible , not more than 12“.

The ground connection integrity to the chassis is very important, and the best way to achieve a good, solid electrical and mechanical contact is to

use a large round crimp lug, crimped and soldered to the ground cable. The next step is to scrape the paint off the vehicle chassis, slightly larger

than the ground lug, at the connection point. Drill a clearance hole in the chassis, the same size as the lug hole, and use a bolt, spring washer and

nut to securely fasten the ground lug. Use petroleum jelly to coat the bolt/lug connection, to prevent oxidization with time.

TIP:

Use the same approach when installing head units, equalizers or any audio equipment for that matter - run short individual grounds from each

piece directly to the vehicle chassis, to minimize ground loops and system noise.

All power, ground and speaker connections should be crimped and soldered for reliability. Make sure that none of the cable insulation can chafe

against exposed metal in the vehicle, causing short circuits to the chassis.

Safe connection sequence:

After all cables are run, connect speaker wires to the speakers and ampliﬁ ers, then run and plug in RCA cables. Next, connect all power grounds

and remote turn on leads. Now connect all +12 volt cables to the ampliﬁ er/s and distribution blocks and fuse holders. Finally, connect the main

+12 volt cable to the battery, with the main fuse removed, and we are almost ready to power up the system.

Power up the system:

The following procedure may seem like overkill, but there is nothing more frustrating than turning on a system for the ﬁ rst time, and it does not

work properly immediately.

First, make sure the head unit is off, and turn all level controls to minimum (anticlockwise), including the head unit volume control. Set all equa-

lizers to 0 dB (no boost), and all crossover frequency controls at approximate frequencies, as recommended by the loudspeaker manufacturer. Set

all input selector and crossover switches as required for the application.

Remove all ampliﬁ er fuses, and insert the main fuse at the battery. If the fuse does not blow, you can insert the fuse in one of the ampliﬁ ers, and

we are ready to turn on the system.

Turn the head unit on, insert a CD, or select a radio station, and increase the head unit volume control. If the system sounds ﬁ ne, turn off the head

unit, and install fuses in the remaining ampliﬁ ers, one by one, till the complete system is powered up and functioning properly.