Instrukcja obsługi Maxxus MX 10.0 Zero

Maxxus urządzenie do masażu MX 10.0 Zero

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Maxxus MX 10.0 Zero (24 stron) w kategorii urządzenie do masażu. Ta instrukcja była pomocna dla 7 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/24

ENG

Massage Chair

MX 10.0Z

I N S TA L L AT I O N & O P E R AT I N G M A N U A L

Index

Index 2

Safety Instructions 3 – 5

Overview - Massage Chair 6 – 7

Overview - Remote Control 8 – 9

Operation 10 – 17

Assembly 17

Location & Storage 18

Technical Details 18

Recommended Accessories 18

Care, Cleaning & Maintenance 19

Disposal 19

Exploded Drawing and Parts List 20

Notes 21

Warranty 22

Service Contract 23

This publication may not be reproduced, stored in a retrieval system, or transmitted in whole or in part, in any form or by any means, electronic,

mechanical, photocopying, recording, or otherwise without the prior written permission of Maxxus Group GmbH & Co. KG.

Errors, colour and technical modication subject to change, reproduction as well as electronic duplication only with written permission of

MAXXUS Group GmbH & Co. KG.

ENG

Safety Instructions

Before you use the massage chair, please make sure you are familiar with the contents of the entire Operating

Manual, in particular the safety instructions, maintenance & cleaning instructions and the training information.

Please also make sure that everyone who uses this massage chair is also familiar with all this information and

observes it.

Be sure to follow carefully the maintenance and safety instructions contained in this manual.

This massage chair may only be used for its intended purpose. Misappropriate use may pose a risk for possi-

ble accidents, damage to health or damage to the massage chair for which no liability will be accepted by the

distributor.

Mains Connection

−A mains voltage of 220-230V is required for the operation of the device.

−The massage chair may only be connected by the mains cable included in delivery to a grounded 16A

individually fused socket which has been installed by a professional.

− Always remember to rst remove the mains plug from the socket if you want to change the location of the

massage chair.

−Always remove the mains plug from the socket before starting any cleaning, maintenance or other works to

the massage chair.

−Do not connect the mains adapter plug to a socket strip or to a cable drum.

−If using an extension lead make sure that it conforms to VDE guidelines and regulations or the equivalent

in your country.

−Always lay the power cable in such a way that it cannot be damaged or cause a tripping hazard.

−Electrical appliances, such as smartphones, PC, TV (LCD, plasma, tube, etc.), game consoles, etc. trans-

mit electromagnetic radiation during operation and in stand-by mode. Keep these all these devices away

from this massage chair as they may cause malfunction or interferences.

−For safety reasons, always remove the mains cable plug from the electrical socket when the massage chair

is not in use.

Training Environment

− Choose an area for your massage chair that is level, clean and easily accessible. The area should o󰀨er the

largest free space and maximum safety possible.

−Ensure that the area is well ventilated during use and that you avoid drafts.

−The massage chair is not suitable for outdoor use and so it should only be stored and used in a tempered,

dry and clean room.

−The ambient temperature range for the operation and storage of the massage chair should be between at

least 10° to a maximum of 30°Celsius

−Do not operate or store the massage chair in wet areas such as in swimming pools, saunas or bathrooms

etc.

− Make sure that when in operation or when idle that the massage chair is kept on rm, level ground and that

any unevenness in the oor surface is removed or levelled out.

− To protect delicate oors, such as wood, laminates, tiles, etc. from damage such as scratches it is advisa-

ble to place a mat permanently under the device.MAXXUS® oor protection

−Make sure that the mat is secured against slipping.

−Do not place the massage chair directly on pale coloured or white carpets as the feet on the device can

cause staining.

− Make sure that the massage chair including the mains cable do not come into contact with hot objects and

that the massage chair is kept at su󰀩cient distance away from all sources of heat such as heating radia-

tors, open and res, ovens and stoves.

Specyfikacje produktu

Marka:	Maxxus
Kategoria:	urządzenie do masażu
Model:	MX 10.0 Zero

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Maxxus MX 10.0 Zero, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje urządzenie do masażu Maxxus

Maxxus MX 12.0z Instrukcja

15 Września 2024

Maxxus MX 10.0 Zero Instrukcja

1 Września 2024

Maxxus MX 7.1 Instrukcja

23 Sierpnia 2024

Maxxus MX 8.0z Instrukcja

22 Sierpnia 2024

Maxxus MX 20.0z Instrukcja

16 Sierpnia 2024

Maxxus MX 10.0Z Instrukcja

4 Lipca 2024

Instrukcje urządzenie do masażu

Najnowsze instrukcje dla urządzenie do masażu

Homedics NMS-350 Instrukcja

12 Stycznia 2025

Ufesa MJ8321 Instrukcja

12 Stycznia 2025

Homedics BMSC-1000H-EU Instrukcja

12 Stycznia 2025

Homedics CBS-1000 Instrukcja

11 Stycznia 2025

Primo TB-1583 Instrukcja

11 Stycznia 2025

LG MH21BB Instrukcja

6 Stycznia 2025

LG MH21RR Instrukcja

6 Stycznia 2025

Physa Colmar Instrukcja

5 Stycznia 2025

Physa Bordeaux Instrukcja

5 Stycznia 2025

SereneLife SLBBMG100 Instrukcja

5 Stycznia 2025