Instrukcja obsługi Maxell MPC-R1700

Maxell bank mocy MPC-R1700

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Maxell MPC-R1700 (4 stron) w kategorii bank mocy. Ta instrukcja była pomocna dla 14 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/4
MPC-R1700 User manual
Maxell Rechargeable Power Bank
MPC-R17 00
Accessories:
Charger unit x 1
Charging cable (~20cm) x 1
Instruction booklet with warranty sheet x 1
-Should there be product improvements, the product appearance or
specifications may change without prior notice.
-This instruction manual is not allowed to be copied partially or wholly.
Unauthorized reproduction is also prohibited.
Disclaimers:
-Maxell is not liable for the injuries due to fire accidents, earthquake, third party’
activities.
- Maxell is not liable for other defects due to improper misuse of the product
caused by the user.
- Maxell is not liable for any injury caused when using this product or during the
connection between device to device.
- This product is designed only for Normal Consumer Use and should NOT be
used for Industrial Purposes. If the product is used in this way, Maxell is NOT
liable for human injury or fire accident.
Caution!
Please follow the caution below when using our product.
Danger:
Do not c nect input and output conversely. on
Do not take power from sources other than from the USB port.
Do not disassemble or modify the product
Do not immerse in water
Do not make short circuit to the ports
Do not leave the product in places of high temperature or under direct sunlight.
Do not throw into fire
Do not touch the product if you see any liquid leaking around
Operation Procedures:
1) Charging (Please use this product after a full charge ):
-Connect the input port of enclosed recharge cable to the output port of AC
adaptor with USB output or PC USB port. Charging LED will turn orange.
-LED will turn blue when charging reaches 80~100%. Please end charging by
disconnecting the cable. (Charging time: around 5 hours).
Attention!
Please check the port direction before connection. Incorrect connection may
damage the product. Please end charging if your device cannot be fully
charged after certain period of time Do not charge this product when it is .
connected to other device. This may lead to heat generation or damage to an
the product.
Charge the product every 3 months even it is not often in use. Otherwise, the if
product might be fully discharged and might not be able to charge again.
Battery level checking:
Press the touch sensor when product does not connect to Input/output ports.
LED will turn blue or orange according on battery remaining level. Battery
remaining level is below 10% when LED turns orange. There is no battery if
the LED does no come on. Please recharge the product. t
Charge the smartphone:
2) (It is necessary to use the attached USB charging cable)
-Connect the output port of attached charging cable to smartphone. LED will
turn blue the smartphone has started charging. –
Charging cable (included as accessories)
Smartphone
-Please check the Smartphone (or connected device) charging display under
the charging situation. Please disconnect the cable when the charging is
completed or when you want to stop charging.
Attention!
Rating output for this product is DC5V/1A. Depending device used, this on
product may not have sufficient output and not be able to charge the devices.
For the type of data transfer device with computer, it may unchangeable. be
When the device is at zero battery level or dependi on the device in use, ng
boosting time might be longer or the device might not be able to be charged.
Please check before charging. Maxell warranty does not cover any accidental
loss of your data.
Maintenance:
Use cloth with neutral cleansing agent or water to remove the dirt from the
product body and use a soft dry cloth to clean it. Do not use near gasoline,
thinner or alcohol etc.
Trouble Shooting:
Please contact the Customer Service department if below troubles cannot be
solved.
Trouble Shooting
Reasons
Countermeasures
Charging LED light
does not come on
when this product is
charging. Or, it takes
longer than the
specified charging
time
PC is in standby mode.
Change PC from stand by
mode.
USB port does not have
sufficient power
Disconnect other device
from the output port.
This product is charging
when connected to the
device
Disconnect the device.
Charge the device
separately.
Circumstance
temperature is over the
operation temperature
range.
Product is kept in no
use for long period and
battery is fully
discharged.
The product is unable to be
used.
Please charge the product
every 3 months.
Battery is hot
Product will be warm in
use, in charging and
just after charging.
Please use it after a while.
Remaining battery
level LED does not
light up.
There is no remaining
battery.
Please charge the product.

Specyfikacje produktu

Marka: Maxell
Kategoria: bank mocy
Model: MPC-R1700

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Maxell MPC-R1700, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje bank mocy Maxell

Maxell

Maxell MPC-B2800 Instrukcja

3 Października 2024
Maxell

Maxell MPC-R1700 Instrukcja

3 Października 2024
Maxell

Maxell Storm 7800 Instrukcja

8 Sierpnia 2024

Instrukcje bank mocy

Najnowsze instrukcje dla bank mocy

EcoFlow

EcoFlow DELTA 3 Plus Instrukcja

15 Stycznia 2025
ACOPower

ACOPower HY-PWM-PX20A Instrukcja

14 Stycznia 2025
ACOPower

ACOPower HY-MY40 Instrukcja

14 Stycznia 2025
ACOPower

ACOPower HY-PTP-100W Instrukcja

14 Stycznia 2025
ACOPower

ACOPower HY-AS-MT50 Instrukcja

14 Stycznia 2025
ACOPower

ACOPower HY035-12P Instrukcja

14 Stycznia 2025
ACOPower

ACOPower HY100-12P Instrukcja

14 Stycznia 2025
ACOPower

ACOPower HY025-12P Instrukcja

14 Stycznia 2025
ACOPower

ACOPower HY015-12P Instrukcja

14 Stycznia 2025
ACOPower

ACOPower HY-SG-PS500 Instrukcja

14 Stycznia 2025