Instrukcja obsługi Maxell MPC-B2800

Maxell bank mocy MPC-B2800

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Maxell MPC-B2800 (4 stron) w kategorii bank mocy. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/4
MPC-B2800 User manual
Maxell Rechargeable Power Bank
MPC-B2800
Accessories:
Charger unit x 1
Charging cable (~30cm) x 1
Instruction booklet with warranty sheet x 1
-This instruction manual is not allowed to be copied partially or wholly.
Unauthorized reproduction is also prohibited.
-Should there be product improvements, the product appearance or
specifications may change without prior notice.
Disclaimers:
-Maxell is not liable for the injuries due to fire accidents, earthquake, third party
activities.
- Maxell is not liable for other defects due to improper misuse of the product
caused by the user.
- Maxell is not liable for any injury caused when using this product or during the
connection between device to device.
- This product is designed only for Normal Consumer Use and should NOT be
used for Industrial Purposes. If the product is used in this way, Maxell is NOT
liable for human injury or fire accident.
Caution!
Please follow the caution below when using our product.
Danger:
Do not connect input and output conversely.
Do not take power from sources other than from the USB port.
Do not disassemble or modify the product
Do not immerse in water
Do not make short circuit to the ports
Do not leave the product in places of high temperature or under direct sunlight.
Do not throw into fire
Do not touch the product if you see any liquid leaking around
Operation Procedures:
1) Check the remaining battery level:
Remaining battery level can be checked by pressing the battery level checking
button The ttery level LED will light up. There is no battery remaining if the . ba
LED light does not show. Please charge the product.
2) Charging (Please use this product after a full charge ):
- nnect the input port of enclosed recharge cable to the output port of ACo C
adaptor with USB output or PC USB port. Charging LED will turn red.
-Charging time: ~4 hours (Charged by 5V1A output AC adaptor)
-Charging LED will turn green when charging is complete. Please disconnect
the cable after charging.
Attention!
Please confirm the port direction before connection. Incorrect connection may
damage the product. Please end charging if your device cannot be fully
charged after certain period of time. Don t charge this product when it is
connecting to other device. This might lead to heat generation or damage to
the product. The power from USB port of PC might not be sufficient for
charging. Charge the product every 3 months even it is not often in use. if
Otherwise, the product might be fully discharged and might not be able to
charge again.
3) Charging smartphone (It is necessary to use the enclosed USB charging
cable)
-Connect the output port of attached charging cable to the smartphone and
start charging. (For charging iPod, iPhone series, please use original Apple
charging cable)
-Please check the battery level shown on smartphone (or connected device)
when it is charging. Please disconnect the cable if charging is nished or if you
want to stop charging,
Attention!
Rating output for this product is DC5V/1A. Depending different devices to on
be connected, this product might not have sufficient output and may not be
able to fully charge the devices. When data is transferring between PC and
device, this product might not be able to charge the devices. Depending on the
devices in use, the devices might not be fully charged. When the device is at
zero battery level or depending on the device in use, boosting time might be
longer or the device might not be able to be charged. Please check before
charging. Maxell warranty does not cover any accidental loss of your data.
Maintenance:
Use cloth with neutral cleansing agent or water to remove the dirt from the
product body and use a soft dry cloth to clean it. Don t use the gasoline, thinner
or alcohol etc.
Troubles Shooting:
Please contact the Customer Service department if below troubles cannot be
solved.
Trouble Shooting
Reasons
Countermeasures
Charging LED does
not come on when
this product is
charging. Or, it takes
longer than the
specified charging
time
PC is standby mode. in
Change PC from stand by
mode.
USB port does not have
sufficient power
Disconnect other device
from the output port.
This product is charging
when connecting to the
device
Disconnect the device.
Charge the device
separately.
Circumstance
temperature is over the
operation temperature
range.
Product is kept in no
use for long period and
battery is fully
discharged.
The product is unable to be
used.
Please charge the product
every 3 months.
Battery is hot
Product will be warm in
use, in charging and
just after charging.
Please use it after a while.
Remaining battery
level LED does not
light up.
There is no remaining
battery.
Please charge the product.
Device cannot be
charged
Cables and ports
connection are in
correct.
Please double check the
shape of input port of the
devices.


Specyfikacje produktu

Marka: Maxell
Kategoria: bank mocy
Model: MPC-B2800

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Maxell MPC-B2800, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje bank mocy Maxell

Maxell

Maxell MPC-B2800 Instrukcja

3 Października 2024
Maxell

Maxell MPC-R1700 Instrukcja

3 Października 2024

Instrukcje bank mocy

Najnowsze instrukcje dla bank mocy

Bauhn

Bauhn ATAPB-0224 Instrukcja

15 Października 2024
Anker

Anker 622 Instrukcja

13 Października 2024
Kogan

Kogan KAPBCMPN50A Instrukcja

9 Października 2024
Kogan

Kogan KAPB05L20WA Instrukcja

9 Października 2024
Voltcraft

Voltcraft VC-C909 Instrukcja

9 Października 2024
Urban Factory

Urban Factory BCA31UF Instrukcja

9 Października 2024
Urban Factory

Urban Factory BCA35UF Instrukcja

9 Października 2024
Urban Factory

Urban Factory BCA36UF Instrukcja

9 Października 2024
Urban Factory

Urban Factory BCA30UF Instrukcja

9 Października 2024
Urban Factory

Urban Factory BAB41UF Instrukcja

9 Października 2024