Instrukcja obsługi Maverick Digital Chef

Maverick termometr do żywności Digital Chef

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Maverick Digital Chef (2 stron) w kategorii termometr do żywności. Ta instrukcja była pomocna dla 7 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/2
INSTRUCTION MANUAL
MODEL # HD-8 DIGITAL ALERT
ROASTING THERMOMETER
Introduction
Congratulations on your purchase of the Digital Alert Roasting Thermometer, a
programmable food thermometer.
Unit Features
LCD (Liquid Crystal Display) – Displays all icons, temperature and timer.
The LCD color coded screen will change colors as per the following:
Blue – Will flash blue when the temperature has risen 10°F from the lowest
temperature.
Green – Will flash green then the temperature is within 15 ° F of the set
temperature.
Red- Will flash red when the temperature reaches the set temperature.
The LCD will display temperatures from 16- 482 ° °F. (-9-250 C)
See LCD diagram for detailed information.
BATTERY COMPARTMENT – Holds 2 AAA batteries (Batteries are included).
Buttons
1. MODE – Press to select thermometer or timer mode.
2. HR – In timer mode, press to set hour. Press & hold for 2 seconds, the hours will
increase 10 hours per second. In thermometer mode, press to increase the temperature
value. Press & hold for 2 seconds, the temperature value will increase 10 degrees per
second.
3. °F/°C – In thermometer mode press to select temperature readings in Celsius or
Fahrenheit.
4. MIN – In timer mode, press to set minutes. Press & hold for 2 seconds, the minutes will
increase 10 minutes per second. In thermometer mode, press to decrease the temperature
value. Press & hold for 2 seconds, the temperature value will decrease 10 degrees per
second.
5. MEAT – In thermometer mode, press to select meat type, PROG (program), GBEEF
(ground beef), GPOUL (ground poultry) , BEEF, VEAL, CHCKE (chicken), PORK, POULT
(poultry) , LAMB & FISH. In Timer mode switches between hour/minute timer to a
minute/second timer and back.
6. START/STOP– In timer mode, press to start or stop the timer.
7. TASTE – In thermometer mode, select the meat taste level, RARE, MED RARE,
MEDIUM, MED WELL and WELL DONE.
LCD Diagram
Measure meat temperature to USDA doneness temperature range
1. Press MODE to select thermometer mode. The upper display will show a small MEAT
and a meat type such as BEEF.
2. Press MEAT to select meat type. PROG (program), GBEEF (ground beef), GPOUL
(ground poultry), BEEF, VEAL, CHCKE (chicken), PORK, POULT (poultry) , LAMB & FISH.
3. Press TASTE to select the level of doneness for the meat type selected. RARE, MED
RARE, MEDIUM, MED WELL and WELL DONE.
Note: The temperature displayed to the right of the actual meat temperature PROBE TEMP
will show the preset temperature TEMP SET according to USDA doneness levels. Example:
Beef will be Well Done at 165 °F.
4. Once the temperature of meat reaches the preset doneness level the Unit will beep and
the LCD backlight will turn red.
Measure meat temperature set to your specific taste
1. Press MODE to select thermometer mode. The upper display will show a small MEAT
and a meat type such as BEEF.
2. Press HR or MIN to raise or lower the set temperature. As you press HR or Min the
display changes to PROG (program). Holding the button will raise or lower the temperature
setting rapidly. Pressing MEAT will return you to the preset USDA ranges.
3. Once the temperature of meat reaches the preset doneness level the UNIT will beep and
the LCD backlight will turn red.
Using the Timer
Count down
1. Press MODE to select timer mode. The upper display will show a small TIMER and 0:00.
2. Press HR and MIN button to set the timer. Press START/STOP button to start
countdown. “T” will blink for every second.
3. To stop the countdown process, press START/STOP button. The “T” becomes solid.
4. Press HR & MIN buttons together to clear the setting back to 0:00.
Note: The minimum setting for the timer is 1 minute. When the timer counts down below 1
hour 1:00 the display will change to 59’59” display advising 59 minutes 59 seconds. The
seconds will be shown counting down then. When the countdown reaches 0’00” the timer
starts counting up and it will beep for 60 seconds. The timer and “ST” will blink. Press the
START/STOP button to stop beeping. When the count up reaches 23:59:59 (59 seconds
are not displayed) the display will turn to 0:00, the unit beeps and “ST” will blink for 60
seconds.
Count up
1. Press MODE to select timer mode. The upper display will show a small TIMER and 0:00.
2. Press START/STOP button to start count up. The “S” will blink for every second.
3. To stop the count up process , press START/STOP button. The “S” becomes solid.
4. Press CLEAR button to clear the setting back to 0:00.
HELPFUL HINTS
Do not use the probe wire above 662 °F (350 °C).
Do not allow the probe or probe wire to come into contact with flames. If cooking
with grill cover closed, only use medium or low heat.
If the LCD display LLL or HHH instead of the probe temperature, wait for probe to reach
room temperature. If LLL or HHH is still displayed it is likely the internal probe wire has
shorted out either through moisture or heat damage.
If the probe becomes defective within 90 day warranty period please return defective
probe to address below along with return address and we will send you new probe
no charge.
If the temperature displayed seems to read too high or the temperature seems to increase
too quickly check to make sure the probe tip is not poking through the food to outside.
Reposition the probe tip in the center of the thickest part of food. Avoid touching bone or
heavy fat areas.
Cautions:
Not Intended for Use by Persons ages 12 and under.
Do not use the UNIT in the rain. It is not waterproof.
Do not expose the plug of the stainless steel probe or the plug in hole of the Unit to
water or any liquid. This will result in a bad connection and faulty readings.
Do not expose the Unit to direct heat or surface heat.
Do not use stainless steel probe in microwave oven.
Cleaning
Wash the metal probe tip with hot soapy water and dry thoroughly. Do not immerse the
probe in water while cleaning.
Wipe the UNIT with damp cloth. Do not immerse in water.
LIMITED NINETY DAY WARRANTY
Maverick Industries Inc. warrants the Professional Cooking Thermometer to be free of
defects in parts, materials and workmanship for a period of 90 days, from date of purchase.
Should any repairs or servicing under this warranty be required, contact Maverick
Customer Service by mail or phone for instructions on how to pack and ship the
Professional Cooking Thermometer to Maverick's National Service Center located as
follows:
Maverick Customer Service
94 Mayfield Ave.
Edison NJ 08837
www.maverickhousewares.com
Telephone: (732) 417-9666
Hours: Weekdays 8:30 AM- 4:30 PM
Do not send any parts or product to Maverick without calling and obtaining a Return
Authorization Number and instructions.
This warranty is VOID if instructions for use are not followed; for accidental damage; for
commercial use; for damage incurred while in transit; or if the Professional Remote
Cooking Thermometer has been tampered with.
This warranty gives you specific legal rights and you may also have other rights which vary
from state to state.

Specyfikacje produktu

Marka: Maverick
Kategoria: termometr do żywności
Model: Digital Chef

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Maverick Digital Chef, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje termometr do żywności Maverick

Maverick

Maverick Digital Chef Instrukcja

7 Września 2024

Instrukcje termometr do żywności

Najnowsze instrukcje dla termometr do żywności

Hendi

Hendi 271315 Instrukcja

9 Października 2024
Taylor

Taylor 9840 Instrukcja

9 Października 2024
Taylor

Taylor 1471N Instrukcja

9 Października 2024
Taylor

Taylor 5309295 Instrukcja

9 Października 2024
Taylor

Taylor 5265467 Instrukcja

9 Października 2024
Ooni

Ooni Digital Infrared Thermometer Instrukcja

7 Października 2024
Patton

Patton Emax Bluetooth Smart thermometer I Instrukcja

6 Października 2024
Taylor

Taylor 5305742 Instrukcja

5 Października 2024
TFA Dostmann

TFA Dostmann 30.1040 Instrukcja

3 Października 2024
GrillEye

GrillEye Max Instrukcja

3 Października 2024