Instrukcja obsługi Manley Variable MU

Manley edytor Variable MU

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Manley Variable MU (22 stron) w kategorii edytor. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/22
CONTENTS
SECTION PAGE
INTRODUCTION 2
MAINS CONNECTIONS 3
INSTALLATION 4
FRONT PANEL 5
REAR PANEL 6
EXAMPLE SETTINGS 7
FRONT PANEL ADJUSTMENTS 8
OPERATIONAL NOTES 9
MASTERING AND M/S MODELS 10
T-BAR MODIFICATION 11
GAIN REDUCTION CURVES 12
SPECIFICATIONS 13
TECHNICAL NOTES 14
SERVICE ADJUSTMENTS 15
BLANK RECALL SHEETS 16- 19
NOTES 20
Rev 5.2
INTRODUCTION
THANK YOU!...
for choosing the Manley Laboratories Stereo Variable Mu® Limiter Compressor. This unit has
been our best selling product for many years. It is one of the very few compressors that has be-
come a real standard in Mastering studios and contributed to most hit records over the last decade
and probably the next. “Mu” is tube-speak for gain, and Variable Mu® is our registered trademark
for this limiter compressor. It works by using the “remote cut-off” or re-biasing of a vacuum tube
to achieve compression. The precious vintage Fairchild 670 also uses this technique and is one
of few all-tube compressor to do so, that we know of. Even the side-chain has glowing rectier
bottles. How’s it work? The unique 5670 dual triode is at the center of the peak-reducing and
compression action constantly being re-biased by the vacuum tube rectied side-chain control
voltages which cause this tube to smoothly change its gain. Just like that.
LOCATION & VENTILATION
The Manley Stereo Variable Mu® Limiter Compressor must be installed in a stable loca-
tion with ample ventilation. It is recommended, if this unit is rack mounted, that you allow
enough clearance on the top and bottom of the unit such that constant movement of air can
ow through the ventilation holes. There are 8 tubes inside this unit so it does run quite hot.
Good ventilation is denitely encouraged.
UNPACKING: Unpack the unit carefully by removing all the custom foam packing materi-
al and make sure that all supplied accessories are present. Carefully examine all items for any
possibility of shipping damage. All of the tubes are already installed and should have survived
the journey from our factory to your studio. They should be standing at attention in their sock-
ets, and should show no signs of distress such as chipped glass, loose internal components or
obvious breakage. If the unit is damaged or fails to operate, notify the shipper or your dealer
or us or your local authorities immediately. Or if you suspect The Shipping People threw it off
the airplane and onto your front porch whilst ying overhead at 30,000 feet, notify the shipping
company without delay and complain to them as we only guarantee this unit to be able to survive
a drop of 23,487 feet or less.
Your Manley Variable Mu® Limiter Compressor was packed with extreme love and care, and
each box includes the following components and accessories:
a) 1 each, 6 foot IEC 3-conductor power cable
b) 1 each, Owner’s Manual (that we hope you will keep reading.)
It is prudent to retain the shipping materials for future use, as they are custom-formed for this
unit and will greatly minimize the chance of shipping-related damage should you ever need to put
your precious Variable Mu®in the careless hands of The Shipping People again. We have heard
that certain rodents might enjoy munching on the packing foam. We are sorry to report that we do
not warranty the packing foam against attack by mice, rats, or other hungry critters, hungry chil-
dren, hungry neighbors, etc. Try glue traps or spring-traps loaded with peanut butter to eliminate
these unwelcome freeloaders from your property.
2

Specyfikacje produktu

Marka: Manley
Kategoria: edytor
Model: Variable MU

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Manley Variable MU, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje edytor Manley

Manley

Manley Nu Mu Instrukcja

21 Września 2024
Manley

Manley ELOP+ Instrukcja

18 Września 2024
Manley

Manley Variable MU Instrukcja

17 Września 2024

Instrukcje edytor

Najnowsze instrukcje dla edytor

Helix

Helix DSP ULTRA Instrukcja

8 Października 2024
Helix

Helix DSP.3S Instrukcja

8 Października 2024
Helix

Helix DSP ULTRA S Instrukcja

8 Października 2024
MyMix

MyMix RX-2 Instrukcja

8 Października 2024
Henry Engineering

Henry Engineering AES DigiSwitch 3X1 Instrukcja

8 Października 2024
SPL

SPL Transient Designer 9946 Instrukcja

8 Października 2024
SPL

SPL M/S Master Instrukcja

8 Października 2024
Bose

Bose ControlSpace CC-16 Instrukcja

7 Października 2024
MuxLab

MuxLab 500550 Instrukcja

7 Października 2024
Lectrosonics

Lectrosonics DNT16i Instrukcja

7 Października 2024