Instrukcja obsługi Manhattan 160537

Manhattan Kontroler 160537

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Manhattan 160537 (8 stron) w kategorii Kontroler. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/8
MAN-160537-UM-1106-04
ATA 133 RAID
PCI ExPREss CARD
UsER MANUAL
MODEL 160537
2
Thank you for purchasing the MANHATTAN
®
ATA 133 RAID PCI Express Card, Model 160537.
Compliant with PCI Express 1.0a specifications, this card supports UDMA6 data transfer rates
of up to 133 MBps and full-speed burst transfers on the ATA bus. Using 48-bit LBA, it breaks the
size limit of 137 GB hard drives to support larger storage devices.
INTRoDUCTIoN
This ATA 133 RAID PCI Express Card (also known as a low-profile ultra ATA-133 RAID PCIe
host adapter) is a controller board that supports both low-profile and regular-size PCI in one
card.
The card can upgrade your desktop computer with dual ultra ATA-133 channels and the ability
to support RAID 0, RAID 1 and JBOD features. It comes complete with drivers for Windows
2000, XP and Server 2003.
RAID (redundant array of independent disks) greatly enhances two main areas of data storage:
performance and data integrity. By using RAID 0, also known as "Striping," performance of
sustained data transfer rates is greatly enhanced by simultaneously writing data to two, three or
four drives. The second benefit of RAID is data redundancy. RAID 1 (Mirroring) writes identical
data on two drives or sets of drives, thus protecting the data from a disk failure. If for any
reason, one drive were to fail, your data is secure and available from the mirrored second
drive.
3
fEATUREs
• 48 bits LBA can break the capacity limit to support HDD larger than 137 GB
• Supports 1-lane 2.5 Gbps PCI Express
• Includes 2 brackets (low-profile PCI and regular-size PCI)
• Low-profile PCIe form factor
• Pin header on board for LED connection
• Complete with drivers for Windows 2000/XP/Server 2003
• Provides RAID 0 (Striping) to greatly increase the performance of data transfer by
simultaneously writing data to two drives
• Provides RAID 1 (Mirroring) to protect the data from a disk failure by writing identical data
on two drives
• RAID 0+1 (Mirrored-Striping) combines both striping and mirroring technologies to provide
both the performance enhancements that come from striping and the data availability and
integrity that comes from mirroring
• JBOD, a virtual disk that combines all disk drives as one entire disk drive
• Supports full-speed burst transfers on the ATA bus
• Supports up to UDMA6 transfer mode

Specyfikacje produktu

Marka: Manhattan
Kategoria: Kontroler
Model: 160537

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Manhattan 160537, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Kontroler Manhattan

Manhattan

Manhattan 160537 Instrukcja

13 Września 2024

Instrukcje Kontroler

Najnowsze instrukcje dla Kontroler

Speed-Link

Speed-Link Thunderstrike Instrukcja

11 Grudnia 2024
GVM

GVM YK22 Instrukcja

11 Grudnia 2024
IVT

IVT MPPTplus+ 20A Instrukcja

11 Grudnia 2024
IVT

IVT SCDplus Instrukcja

11 Grudnia 2024
Alfatron

Alfatron ALF-IPCON-HDMI Instrukcja

10 Grudnia 2024
Hotone

Hotone Ampero Control Instrukcja

7 Grudnia 2024
Hotone

Hotone Patch Kommander Instrukcja

7 Grudnia 2024
IFM

IFM AC1317 Instrukcja

5 Grudnia 2024
Thrustmaster

Thrustmaster Ferrari GT Experience Instrukcja

13 Października 2024
Razer

Razer Wolverine V3 Pro Instrukcja

9 Października 2024