Instrukcja obsługi Makita FS2300
Makita
maszyna śrubowa
FS2300
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Makita FS2300 (8 stron) w kategorii maszyna śrubowa. Ta instrukcja była pomocna dla 23 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/8

1
ENGLISH (Original instructions)
INSTRUCTION MANUAL
DOUBLE INSULATION
WARNING:
For your personal safety, READ and UNDERSTAND before using.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
Drywall Screwdriver
FS2200
FS2300
010101

2
ENGLISH (Original instructions)
SPECIFICATIONS
Model FS2200 FS2300
Self drilling screw 6 mm 6 mm
Capacities Drywall screw 5 mm 5 mm
No load speed (min
-1) 0 - 2,500 0 - 2,500
Overall length 287 mm 290 mm
Net weight 1.6 kg 1.6 kg
Safety class /II
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Note: Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
END201-4
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
・ Read instruction manual.
・ DOUBLE INSULATION
・ Only for EU countries
Do not dispose of electric equipment
together with household waste material!
In observance of European Directive
2002/96/EC on waste electric and
electronic equipment and its
implementation in accordance with
national law, electric equipment that
have reached the end of their life must
be collected separately and returned to
an environmentally compatible
recycling facility.
ENE033-1
Intended use
The tool is intended for screw driving in wood, metal and
plastic.
ENF002-1
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated in accordance with European
Standard and can, therefore, also be used from sockets
without earth wire.
For Model FS2300
ENG102-2
For European countries only
Noise
The typical A-weighted noise level determined according
to EN60745:
Sound pressure level (L
pA) : 83 dB(A)
Sound power level (L
WA) : 94 dB(A)
Uncertainty (K) : 3 dB(A)
Wear ear protection
ENG204-2
Vibration
The vibration total value (tri-axial vector sum)
determined according to EN60745:
Work mode: screwdriving without impact
Vibration emission (ah) : 2.5 m/s2 or less
Uncertainty (K) : 1.5 m/s2
ENG901-1
• The declared vibration emission value has been
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
• The declared vibration emission value may also be
used in a preliminary assessment of exposure.
WARNING:
• The vibration emission during actual use of the
power tool can differ from the declared emission
value depending on the ways in which the tool is
used.
• Be sure to identify safety measures to protect the
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).

3
ENH101-12
EC Declaration of Conformity
We Makita Corporation as the responsible
manufacturer declare that the following Makita
machine(s):
Designation of Machine:
Drywall Screwdrive
r
Model No./ Type: FS2300
are of series production and
Conforms to the following European Directives:
98/37/EC until 28th December 2009 and then with
2006/42/EC from 29th December 2009
And are manufactured in accordance with the following
standards or standardised documents:
EN60745
The technical documentation is kept by our authorised
representative in Europe who is:
Makita International Europe Ltd,
Michigan, Drive, Tongwell,
Milton Keynes, MK15 8JD, England
30th January 2009
000230
Tomoyasu Kato
Director
Makita Corporation
3-11-8, Sumiyoshi-cho,
Anjo, Aichi, JAPAN
GEA005-3
General Power Tool Safety
Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and
instructions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Work area safety
1. Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
2. Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or fumes.
3. Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
Electrical safety
4. Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will
reduce risk of electric shock.
5. Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of
electric shock if your body is earthed or grounded.
6. Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
7. Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords
increase the risk of electric shock.
8. When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of
a cord suitable for outdoor use reduces the risk of
electric shock.
9. If operating a power tool in a damp location is
unavoidable, use a residual current device
(RCD) protected supply. Use of an RCD reduces
the risk of electric shock.
10. Use of power supply via a RCD with a rated
residual current of 30mA or less is always
recommended.
Personal safety
11. Stay alert, watch what you are doing and use
common sense when operating a power tool.
Do not use a power tool while you are tired or
under the influence of drugs, alcohol or
medication. A moment of inattention while
operating power tools may result in serious
personal injury.
12. Use personal protective equipment. Always
wear eye protection. Protective equipment such
as dust mask, non-skid safety shoes, hard hat, or
hearing protection used for appropriate conditions
will reduce personal injuries.
13. Prevent unintentional starting. Ensure the
switch is in the off-position before connecting
to power source and/or battery pack, picking
up or carrying the tool. Carrying power tools
with your finger on the switch or energising power
tools that have the switch on invites accidents.
14. Remove any adjusting key or wrench before
turning the power tool on. A wrench or a key left
attached to a rotating part of the power tool may
result in personal injury.
15. Do not overreach. Keep proper footing and
balance at all times. This enables better control
Specyfikacje produktu
Marka: | Makita |
Kategoria: | maszyna śrubowa |
Model: | FS2300 |
Źródło zasilania: | Prąd przemienny |
Waga produktu: | 1700 g |
Regulowana prędkość: | Tak |
Prędkość biegu jałowego (max): | 2500 RPM |
Bieg wsteczny: | Tak |
Średnica śrub (max): | 6 mm |
Maksymalny moment obrotowy: | 25 N·m |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Makita FS2300, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje maszyna śrubowa Makita

28 Maja 2024

28 Maja 2024

28 Maja 2024

27 Maja 2024

27 Maja 2024

26 Maja 2024

26 Maja 2024

25 Maja 2024

25 Maja 2024

25 Maja 2024
Instrukcje maszyna śrubowa
- maszyna śrubowa Worx
- maszyna śrubowa Milwaukee
- maszyna śrubowa Bosch
- maszyna śrubowa Yato
- maszyna śrubowa Parkside
- maszyna śrubowa SW-Stahl
- maszyna śrubowa Black & Decker
- maszyna śrubowa Hazet
- maszyna śrubowa DeWalt
- maszyna śrubowa Einhell
- maszyna śrubowa Silverline
- maszyna śrubowa Ozito
- maszyna śrubowa RYOBI
- maszyna śrubowa Chicago Pneumatic
- maszyna śrubowa DEDRA
- maszyna śrubowa Hilti
- maszyna śrubowa Emos
- maszyna śrubowa Trotec
- maszyna śrubowa Meec Tools
- maszyna śrubowa Güde
- maszyna śrubowa Weidmüller
- maszyna śrubowa Airpress
- maszyna śrubowa Ergotools Pattfield
- maszyna śrubowa Beta
- maszyna śrubowa Fein
- maszyna śrubowa Craftsman
- maszyna śrubowa Alpha Tools
- maszyna śrubowa HiKOKI
- maszyna śrubowa Proviel
- maszyna śrubowa Metabo
- maszyna śrubowa Cotech
- maszyna śrubowa Skil
- maszyna śrubowa Laserliner
- maszyna śrubowa Cocraft
- maszyna śrubowa Park Tool
- maszyna śrubowa Greenworks
- maszyna śrubowa Pansam
- maszyna śrubowa Kress
Najnowsze instrukcje dla maszyna śrubowa

22 Października 2024

6 Października 2024

1 Października 2024

1 Października 2024

1 Października 2024

1 Października 2024

1 Września 2024

23 Sierpnia 2024

23 Sierpnia 2024

23 Sierpnia 2024