Instrukcja obsługi Makita BFT080FZ
Makita
maszyna śrubowa
BFT080FZ
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Makita BFT080FZ (32 stron) w kategorii maszyna śrubowa. Ta instrukcja była pomocna dla 10 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/32
INSTRUCTION MANUAL
MANUEL D'INSTRUCTION
MANUAL DE INSTRUCCIONES
Cordless Screwdriver
Visseuse sans l
Atornillador Inalámbrico
BFT020F
BFT040F
BFT042F
BFT080F
BFT081F
BFT122F
BFT123F
IMPORTANT: Read Before Using.
IMPORTANT : Lire avant usage.
IMPORTANTE: Lea antes de usar.
2 ENGLISH
ENGLISH (Original instructions)
SPECIFICATIONS
Model BFT020F BFT040F BFT080F BFT122F BFT042F BFT081F BFT123F
Fastening
torque
Hard joint 0.5 - 2 N·m
(4.4 -
17.8 in·lbs)
1 - 4 N·m
(8.9 -
35.4 in·lbs)
3 - 8 N·m
(26.6 -
70.8in·lbs)
5 - 12 N·m
(44.3 -
106 in·lbs)
1 - 4 N·m
(8.9 -
35.4 in·lbs)
3 - 8 N·m
(26.6 -
70.8 in·lbs)
5 - 12 N·m
(44.3 -
106 in·lbs)
Soft joint 0.5 - 2 N·m
(4.4 -
17.8 in·lbs)
1 - 3.5 N·m
(8.9 -
31 in·lbs)
3 - 6.5 N·m
(26.6 -
57.5 in·lbs)
5 - 10 N·m
(44.3 -
88.5 in·lbs)
1 - 3.5 N·m
(8.9 -
31 in·lbs)
3 - 7.5 N·m
(26.6 -
66.4 in·lbs)
5 - 12 N·m
(44.3 -
106 in·lbs)
No load speed (RPM) 540 /min. 950 /min. 540 /min. 320 /min. 1,200 /min. 700 /min. 390 /min.
Dimensions 200 x 65 x 251 mm (7-7/8" x 2-9/16" x 9-7/8")
(with Battery Cartridge BH9020/BH9020A)
200 x 71 x 242 mm (7-7/8" x 2-13/16" x 9-1/2")
(with Battery Cartridge BH1220C)
200 x 65 x 274 mm (7-7/8" x 2-9/16" x 10-3/4")
(with Battery Cartridge BH9033/BH9033A)
200 x 71 x 251 mm (7-7/8" x 2-13/16" x 9-7/8")
(with Battery Cartridge BH1233C)
Net weight 1.4 kg (3.1lbs.)
1.5 kg (3.3 lbs.)
1.5 kg (3.4 lbs.)
• Due to our continuing program of research and development, the specications herein are subject to change with-
out notice.
• Specications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
General Power Tool Safety Warnings
WARNING Read all safety warnings and all instruc-
tions. Failure to follow the warnings and instructions may
result in electric shock, re and/or serious injury.
Save all warnings and instruc-
tions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Work area safety
1. Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
2. Do not operate power tools in explosive atmo-
spheres, such as in the presence of ammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
3. Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
Electrical safety
4. Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodied plugs and matching outlets will
reduce risk of electric shock.
5. Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of elec-
tric shock if your body is earthed or grounded.
6. Do not expose power tools to rain or wet con-
ditions. Water entering a power tool will increase
the risk of electric shock.
7. Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges
or moving parts. Damaged or entangled cords
increase the risk of electric shock.
8.
When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a cord
suitable for outdoor use reduces the risk of electric shock.
9. If operating a power tool in a damp location is
unavoidable, use a ground fault circuit inter-
rupter (GFCI) protected supply. Use of an GFCI
reduces the risk of electric shock.
Personal safety
10. Stay alert, watch what you are doing and use
common sense when operating a power tool.
Do not use a power tool while you are tired or
under the inuence of drugs, alcohol or med-
ication. A moment of inattention while operating
power tools may result in serious personal injury.
11. Use personal protective equipment. Always
wear eye protection. Protective equipment such
as dust mask, non-skid safety shoes, hard hat, or
hearing protection used for appropriate conditions
will reduce personal injuries.
12. Prevent unintentional starting. Ensure the
switch is in the off-position before connecting
to power source and/or battery pack, picking
up or carrying the tool. Carrying power tools with
your nger on the switch or energising power tools
that have the switch on invites accidents.
13. Remove any adjusting key or wrench before
turning the power tool on. A wrench or a key left
attached to a rotating part of the power tool may
result in personal injury.
14. Do not overreach. Keep proper footing and
balance at all times. This enables better control
of the power tool in unexpected situations.
15. Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing, and gloves
away from moving parts. Loose clothes, jewel-
lery or long hair can be caught in moving parts.
16. If devices are provided for the connection of
dust extraction and collection facilities, ensure
these are connected and properly used. Use of
dust collection can reduce dust-related hazards.
3 ENGLISH
Power tool use and care
17. Do not force the power tool. Use the correct
power tool for your application. The correct
power tool will do the job better and safer at the
rate for which it was designed.
18. Do not use the power tool if the switch does
not turn it on and off. Any power tool that cannot
be controlled with the switch is dangerous and
must be repaired.
19. Disconnect the plug from the power source
and/or the battery pack from the power tool
before making any adjustments, changing
accessories, or storing power tools. Such pre-
ventive safety measures reduce the risk of starting
the power tool accidentally.
20. Store idle power tools out of the reach of chil-
dren and do not allow persons unfamiliar with
the power tool or these instructions to operate
the power tool. Power tools are dangerous in the
hands of untrained users.
21. Maintain power tools. Check for misalignment
or binding of moving parts, breakage of parts
and any other condition that may affect the
power tool’s operation. If damaged, have the
power tool repaired before use. Many accidents
are caused by poorly maintained power tools.
22. Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.
23. Use the power tool, accessories and tool bits
etc. in accordance with these instructions, tak-
ing into account the working conditions and
the work to be performed. Use of the power tool
for operations different from those intended could
result in a hazardous situation.
Battery tool use and care
24. Recharge only with the charger specied by
the manufacturer. A charger that is suitable for
one type of battery pack may create a risk of re
when used with another battery pack.
25. Use power tools only with specically desig-
nated battery packs. Use of any other battery
packs may create a risk of injury and re.
26. When battery pack is not in use, keep it away
from other metal objects, like paper clips,
coins, keys, nails, screws or other small metal
objects, that can make a connection from one
terminal to another. Shorting the battery termi-
nals together may cause burns or a re.
27. Under abusive conditions, liquid may be
ejected from the battery; avoid contact. If con-
tact accidentally occurs, ush with water. If
liquid contacts eyes, additionally seek medical
help. Liquid ejected from the battery may cause
irritation or burns.
Service
28. Have your power tool serviced by a qualied
repair person using only identical replacement
parts. This will ensure that the safety of the power
tool is maintained.
29. Follow instruction for lubricating and chang-
ing accessories.
30. Keep handles dry, clean and free from oil and
grease.
CORDLESS SCREWDRIVER
SAFETY WARNINGS
1. Hold power tool by insulated gripping sur-
faces, when performing an operation where
the fastener may contact hidden wiring.
Fasteners contacting a "live" wire may make
exposed metal parts of the power tool "live" and
could give the operator an electric shock.
2. Always be sure you have a rm footing.
Be sure no one is below when using the tool in
high locations.
3. Hold the tool rmly.
4. Keep hands away from rotating parts.
5. Do not touch the bit or the workpiece immedi-
ately after operation; they may be extremely
hot and could burn your skin.
SAVE THESE INSTRUCTIONS.
WARNING: DO NOT let comfort or famil-
iarity with product (gained from repeated
use) replace strict adherence to safety
rules for the subject product. MISUSE or
failure to follow the safety rules stated in
this instruction manual may cause serious
personal injury.
Symbols
The followings show the symbols used for tool.
volts
direct current
no load speed
revolutions or reciprocation per minute
IMPORTANT SAFETY
INSTRUCTIONS
FOR BATTERY CARTRIDGE
1. Before using battery cartridge, read all instruc-
tions and cautionary markings on (1) battery
charger, (2) battery, and (3) product using
battery.
2. Do not disassemble battery cartridge.
3. If operating time has become excessively
shorter, stop operating immediately. It may
result in a risk of overheating, possible burns
and even an explosion.
4. If electrolyte gets into your eyes, rinse them
out with clear water and seek medical atten-
tion right away. It may result in loss of your
eyesight.
Specyfikacje produktu
| Marka: | Makita |
| Kategoria: | maszyna śrubowa |
| Model: | BFT080FZ |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Makita BFT080FZ, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje maszyna śrubowa Makita
27 Maja 2024
26 Maja 2024
25 Maja 2024
25 Maja 2024
25 Maja 2024
25 Maja 2024
22 Maja 2024
20 Maja 2024
20 Maja 2024
18 Maja 2024
Instrukcje maszyna śrubowa
- maszyna śrubowa Worx
- maszyna śrubowa Milwaukee
- maszyna śrubowa Bosch
- maszyna śrubowa Parkside
- maszyna śrubowa Black & Decker
- maszyna śrubowa Hazet
- maszyna śrubowa DeWalt
- maszyna śrubowa Einhell
- maszyna śrubowa RYOBI
- maszyna śrubowa DEDRA
- maszyna śrubowa Meec Tools
- maszyna śrubowa Güde
- maszyna śrubowa Airpress
- maszyna śrubowa Metabo
- maszyna śrubowa Skil
- maszyna śrubowa Pansam
- maszyna śrubowa Kress
Najnowsze instrukcje dla maszyna śrubowa
6 Października 2024
1 Października 2024
8 Lipca 2024
8 Lipca 2024
8 Lipca 2024
8 Lipca 2024
8 Lipca 2024
8 Lipca 2024
8 Lipca 2024
8 Lipca 2024