Instrukcja obsługi Cotech DJC-119C-SCZ20-180
Cotech
maszyna śrubowa
DJC-119C-SCZ20-180
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Cotech DJC-119C-SCZ20-180 (32 stron) w kategorii maszyna śrubowa. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/32
Important!
Read the entire instruction manual carefully
and make sure that you fully understand
it before you use the equipment. Keep the
manual for future reference.
Viktig information:
Läs hela bruksanvisningen noggrant och
försäkra dig om att du har förstått den
innan du använder utrustningen. Spara
bruksanvisningen för framtida bruk.
Viktig informasjon:
Les disse anvisningene nøye og forsikre deg om
at du forstår dem, før du tar produktet i bruk.
Ta vare på anvisningene for seinere bruk.
Tärkeää tietoa:
Lue nämä ohjeet huolellisesti ja varmista
että olet ymmärtänyt ne, ennen kuin alat
käyttää laitetta. Säilytä ohjeet myöhempää
tarvetta varten.
ENGLISHSVENSKANORSKSUOMI
Borrmaskin
Boremaskin
Finska
Art.no Model
18-3188 DJC-119C-SCZ20-180-UK
40-7975 DJC-119C-SCZ20-180
Hammer
Drill/Driver
Ver. 201110
Original instructions
Bruksanvisning i original
Original bruksanvisning
Alkuperäinen käyttöohje
3
ENGLISH
18 V Li-Ion Drill/Driver
Art.no 18-3188 Model DJC-119C-SCZ20-180-UK
40-7975 DJC-119C-SCZ20-180
Please read the entire instruction manual before use and save it for future reference.
We reserve the right for any errors in text or images and for making any necessary
technical changes to this document. If you should have any questions concerning
technical problems please contact our Customer Services.
Safety
General safety instructions for cordless power tools
Warning! Read all the instructions. Failure to adhere to the following instructions
may lead to electric shocks, fires and/or serious injury. The term “power tools” in the
warning text below refers to your handheld mains operated or battery operated tool.
SAVE THESE INSTRUCTIONS.
1) The work area
a. Keep the work area clean and well illuminated. Cluttered and poorly lit areas
invite accidents.
b. Do not use power tools in explosive environments, e.g. near flammable liquids,
gases or dust. Power tools generate sparks that can easily ignite dust or fumes.
c. Keep children and other bystanders away from the area where you are using the
power tool. Distractions can cause you to lose your concentration and control.
2) Electrical safety
a. The power tool’s plug must fit correctly into the wall socket. Never modify the
plug in any way. Never use an adaptor together with earthed power tools.
Unmodified plugs and suitable wall sockets decrease the risk of electric shock.
b. Avoid physical contact with earthed objects, such as pipes, radiators, ovens or
refrigerators. There is an increased risk of receiving an electrical shock if your
body is earthed.
c. Do not expose the power tool to rain or other wet conditions. If water gets inside
a power tool it increases the risk of electric shock.
d. Do not abuse the lead. Never use the lead to carry the tool or pull the plug from
the wall socket. Keep the lead away from heat, oil, sharp edges and movable
parts. Damaged or tangled leads increase the risk of electric shock.
e. When using power tools outdoors, use an extension lead that is suitable for this
purpose. Use of an extension lead designed for outdoor use decreases the risk
for electric shock.
f. If for some reason you must use a power tool in a wet environment, always
connect it to the mains via an earth-fault circuit breaker such as an RCD (residual
current device). Using an RCD significantly reduces the chances of you receiving
an electric shock.
Specyfikacje produktu
| Marka: | Cotech |
| Kategoria: | maszyna śrubowa |
| Model: | DJC-119C-SCZ20-180 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Cotech DJC-119C-SCZ20-180, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje maszyna śrubowa Cotech
1 Września 2024
Instrukcje maszyna śrubowa
- maszyna śrubowa Worx
- maszyna śrubowa Milwaukee
- maszyna śrubowa Bosch
- maszyna śrubowa Parkside
- maszyna śrubowa Black & Decker
- maszyna śrubowa Hazet
- maszyna śrubowa DeWalt
- maszyna śrubowa Einhell
- maszyna śrubowa Makita
- maszyna śrubowa RYOBI
- maszyna śrubowa DEDRA
- maszyna śrubowa Meec Tools
- maszyna śrubowa Güde
- maszyna śrubowa Airpress
- maszyna śrubowa Metabo
- maszyna śrubowa Skil
- maszyna śrubowa Pansam
- maszyna śrubowa Kress
Najnowsze instrukcje dla maszyna śrubowa
6 Października 2024
1 Października 2024
8 Lipca 2024
8 Lipca 2024
8 Lipca 2024
8 Lipca 2024
8 Lipca 2024
8 Lipca 2024
8 Lipca 2024
8 Lipca 2024