Instrukcja obsługi Makita EK7650H
Makita
Piły tarczowe
EK7650H
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Makita EK7650H (28 stron) w kategorii Piły tarczowe. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/28
Instruction Manual
Original Instruction Manual
EK7650H
EK7651H
Important:
Read this instruction manual carefully before putting the Power Cutter into operation and strictly observe the safety
regulations!
Keep this instruction manual!
2
Thank you for purchasing a MAKITA
product!
Congratulations on choosing a MAKITA Power Cutter! We are
condent that you will be satised with this modern piece of
equipment.
We want you to be satised with your MAKITA product.
In order to guarantee the optimal function and performance of your
Power Cutter and to ensure your personal safety we would request
you to perform the following:
Read this instruction manual carefully before putting the Power
Cutter into operation for the rst time, and strictly observe the
safety regulations! Failure to observe these precautions can
lead to severe injury or death!
For European countries only
EC Declaration of Conformity
We Makita Corporation as the responsible manufacturer
declare that the following Makita machine(s):
Designation of Machine: Power Cutter
Model No./ Type: EK7650H, EK7651H
Specications: see “Technical data” table.
are of series production and
Conforms to the following European Directives:
2000/14/EC, 2006/42/EC
And are manufactured in accordance with the following standards or
standardised documents:
EN ISO 19432
The technical documentation is kept by our authorized
representative in Europe who is:
Makita International Europe Ltd.,
Michigan Drive, Tongwell,
Milton Keynes, Bucks MK15 8JD, England
The conformity assessment procedure required by Directive
2000/14/EC was in Accordance with annex V.
Measured Sound Power Level: 113 dB (A)
Guaranteed Sound Power Level: 114 dB (A)
14. 1. 2011
Tomoyasu Kato
Director
Makita Corporation
3-11-8, Sumiyoshi-cho,
Anjo, Aichi, 446-8502, JAPAN
English
Table of Contents Page
Packing ............................................................................................2
Delivery inventory ..........................................................................3
Symbols...........................................................................................3
SAFETY PRECAUTIONS ................................................................4
General precautions ...................................................................4
Protective equipment .................................................................4
Fuels / Refuelling .......................................................................5
Putting into operation .................................................................5
Cutoff discs ................................................................................6
Kickback and lock-in ..................................................................7
Working behavior / Method of working .......................................7
Cutting metals ............................................................................8
Cutting masonry and concrete ...................................................8
Transport and storage ................................................................9
Maintenance .............................................................................10
First aid ....................................................................................10
Technical data ............................................................................... 11
Denomination of components .....................................................12
PUTTING INTO OPERATION ........................................................13
Mounting the cutting disc ......................................................... 13
Tightening the V-belt / Checking V-belt tension .......................14
Before operating .......................................................................14
Operating .......................................................................................16
Starting .....................................................................................16
Adjusting the carburetor ............................................................17
MAINTENANCE .............................................................................17
V-belt .......................................................................................18
Cleaning the protection hood ...................................................18
Cleaning/changing the air lter .................................................19
Spark plug maintenance ..........................................................20
Replacing the suction head ......................................................20
Cleaning the starter ..................................................................21
Changing the cutting attachment position (central/side) ..........22
SPECIAL ACCESSORIES .............................................................23
Diamond cutting discs ..............................................................23
Guide trolley ............................................................................. 23
Water tank (the component of trolley) ......................................23
Mains/pressure water system ..................................................23
Maintenance chart ........................................................................24
Fault location ................................................................................25
Troubleshooting ...........................................................................26
Storage .......................................................................................... 27
Packing
Your MAKITA Power Cutter is packed in a cardboard box to prevent
shipping damage.
Cardboard is a basic raw material and is consequently reuseable or
suitable for recycling (waste paper recycling).
(Original instructions)
3
You will notice the following symbols on the saw and in the Instruction Manual:
Symbols
Read instruction manual and follow the
warning and safety precautions! Cutting disc dimensions
Particular care and caution! Engine-Manual start
Forbidden! Stop engine!
Wear protective helmet, eye and ear
protection, and respiratory protection! Warning! Kickback!
Wear protective gloves! Fuel (Gasoline)
No smoking! First Aid
No open re! Recycling
Direction of cutting wheel rotation CE - Marking
WARNING: the max. peripheral
speed of the cutting disc is 80 m/s!
1
2 3 4 5
Delivery inventory
1. Power Cutter
2. 13/19 AF combination wrench
3. Star-shaped wrench
4. Carburetor adjustment screwdriver
5. Adapter ring (Tools for some countries may not require this
ring.)
6. Instruction manual (not shown)
In case one of the parts listed should not be included in the
delivery inventory, please consult your sales agent.
Specyfikacje produktu
| Marka: | Makita |
| Kategoria: | Piły tarczowe |
| Model: | EK7650H |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Makita EK7650H, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Piły tarczowe Makita
12 Stycznia 2025
14 Października 2024
7 Października 2024
9 Sierpnia 2024
9 Sierpnia 2024
8 Sierpnia 2024
8 Sierpnia 2024
7 Sierpnia 2024
7 Sierpnia 2024
6 Sierpnia 2024
Instrukcje Piły tarczowe
- Piły tarczowe Worx
- Piły tarczowe Parkside
- Piły tarczowe Panasonic
- Piły tarczowe Black & Decker
- Piły tarczowe DeWalt
- Piły tarczowe Hilti
- Piły tarczowe Mafell
- Piły tarczowe Ferm
- Piły tarczowe Hitachi
- Piły tarczowe Vonroc
- Piły tarczowe Porter-Cable
- Piły tarczowe Skil
- Piły tarczowe Malmbergs
- Piły tarczowe Truper
- Piły tarczowe Triton
Najnowsze instrukcje dla Piły tarczowe
13 Stycznia 2025
13 Stycznia 2025
13 Października 2024
13 Października 2024
12 Października 2024
10 Października 2024
9 Sierpnia 2024
9 Sierpnia 2024
8 Sierpnia 2024
8 Sierpnia 2024