Instrukcja obsługi Makita DC18RD

Makita Ładowarka baterii DC18RD

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Makita DC18RD (56 stron) w kategorii Ładowarka baterii. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/56
GB Two Port Multi
Fast Charger.................... 2
FChargeur Rapide
2 Batteries....................... 4
D2-Fach
Schnellladegerät ............. 6
I Multicaricatore
veloce a due porte .......... 9
NL Accu-snellader met
dubbel accustation ....... 11
EMulti-Cargador Rápido
de Dos Puertos ............. 13
PCarregador Rápido
de 2 Postos.................... 16
DK Multi-hurtigoplader
med to porte.................. 18
GR Ταχύς φορτιστής πολλαπλών
χρήσεων δύο θυρών ......... 20
TR İ Şki Yuvalı ı ı H zl arj Aleti ..... 23
SMulti-snabbladdare med
dubbla portar................. 25
NMulti-hurtiglader med to
porter ..............................27
FIN Kaksipaikkainen nopea
monilaturi........................29
LV
Vairāku ierīču ātras
darb d tības lā ē ājs ar divām
pieslēgvietām....................31
LT Dviejų prievadų daugialypis
spartusis įkroviklis .............33
EE Kahe pesaga kiire
multilaadija........................35
RUS
Быстрозарядное Устройство
На Два Аккумулятора ........37
KK
.......40
CS
双端口充电器
双端口充电器
双端口充电器
双端口充电器双端口充电器 (
(
(
(( 保留备用
保留备用
保留备用
保留备用保留备用 )
)
)
)) ......43
CT 雙電器快速充電器 ................46
PR ....51
AR ....54
ﻊﻳﺮﺳ ﯽﻫﺎﮕﻳﺎﺟ ﻭﺩ ﯽﻳﺎﺗﺪﻨﭼ ﺭژﺭﺎﺷ
DC18RD
2
WARNING: THIS APPLIANCE CAN BE USED BY CHILDREN
AGED FROM 8 YEARS AND ABOVE AND PERSONS WITH
REDUCED PHYSICAL, SENSORY OR MENTAL CAPABILITIES OR
LACK OF EXPERIENCE AND KNOWLEDGE IF THEY HAVE BEEN
GIVEN SUPERVISION OR INSTRUCTION CONCERNING USE OF
THE APPLIANCE IN A SAFE WAY AND UNDERSTAND THE
HAZARDS INVOLVED. CHILDREN SHALL NOT PLAY WITH THE
APPLIANCE. CLEANING AND USER MAINTENANCE SHALL NOT
BE MADE BY CHILDREN WITHOUT SUPERVISION.
Symbols
The followings show the symbols used for the equipment. Be sure that you understand their meaning before use.
1. SAVE THESE INSTRUCTIONS – This manual contains
important safety and operating instructions for battery charger.
2. Before using battery charger, read all instructions and
cautionary markings on (1) battery charger, (2) battery, and (3)
product using battery.
3. CAUTION – To reduce risk of injury, charge only Makita type
rechargeable batteries. Other types of batteries may burst
causing personal injury and damage.
4. Non-rechargeable batteries cannot be charged with this
battery charger.
5. Use a power source with the voltage specified on the
nameplate of the charger.
6. Do not charge the battery cartridge in presence of flammable
liquids or gases.
7. Do not expose charger to rain or snow.
8. Never carry charger by cord or yank it to disconnect from
receptacle.
9. After charging or before attempting any maintenance or
cleaning, unplug the charger from the power source. Pull by
plug rather than cord whenever disconnecting charger.
10. Make sure cord is located so that it will not be stepped on,
tripped over, or otherwise subjected to damage or stress.
11. Do not operate charger with damaged cord or plug. If the cord
or plug is damaged, ask Makita authorized service center to
replace it in order to avoid a hazard.
12. Do not operate or disassemble charger if it has received a
sharp blow, been dropped, or otherwise damaged in any way;
take it to a qualified serviceman. Incorrect use or reassembly
may result in a risk of electric shock or fire.
13. Do not charge battery cartridge when room temperature is
BELOW 10°C (50°F) or ABOVE 40°C (104°F). At cold
temperature, charging may not start.
14. Do not attempt to use a step-up transformer, an engine
generator or DC power receptacle.
15. Do not allow anything to cover or clog the charger vents.
Charging for MAKITA batteries
This charger can charge two batteries at the same time.
1. Plug the charger into the proper AC voltage source. Charging
light will flash in green color repeatedly.
2. Insert the battery cartridge into charger until it stops adjusting
to the guide of charger. Terminal cover of charger can be
opened with inserting and closed with pulling out the battery
cartridge.
3. When the battery cartridge is inserted, the red charging light
will light up and charging will begin with a preset brief melody
sound coming out for assurance as to which sound will come
out to notify the completion of charging.
4. With finish of charge, the charging light will change from red
one to green one and the melody sound or buzzer sound (a
long beep) comes out to notify completion of charge.
5. Charging time varies by temperature (10°C (50°F) – 40°C
(104°F)) that battery cartridge is charged at and conditions of
the battery cartridge, such as a battery cartridge which is new
or has not been used for a long period of time.
6. After charging, remove the battery cartridge from charger and
unplug the charger.
ENGLISH
• Indoor use only • Read instruction manual.
• DOUBLE INSULATION • Ready to charge
• Charging • Charging complete
• Delay charge (Battery cooling or too cold
battery) • Deffective battery
• Conditioning • Cooling abnormality
• Do not short batteries. • Do not destroy battery by fire.
• Do not expose battery to water or rain. • Always recycle batteries.
• Only for EU countries
Do not dispose of electric equipment or battery pack together with household waste material!
In observance of the European Directives, on Waste Electric and Electronic Equipment and Batteries and Accumu-
lators and Waste Batteries and Accumulators and their implementation in accordance with national laws, electric
equipment and batteries and battery pack(s) that have reached the end of their life must be collected separately and
returned to an environmentally compatible recycling facility.
3
Changing melody sound of completed charging
1. Insert the battery cartridge into the charging port that you want
to change the melody sound of completed charging. It brings
out the last preset brief melody sound of completed charging.
2. Removing and re-inserting it within five seconds after this
action makes the melody sound change.
3. Every time removing and re-inserting it within another five
seconds after this, the melody sound changes in order.
4. When the desired melody sound comes out, leave the battery
cartridge being inserted and the charge will begin. When a
“short beep” mode is selected, no completed charging signals
comes out. (Silent Mode)
5. With finish of charge, the green light remains lit with the red
light going out and the melody sound preset at the insertion of
battery cartridge or buzzer sound (a long beep) comes out to
notify completion of charge. (In selected silent mode, no
sounds come out.)
6. Preset melody sound remains stored even when the charger
is unplugged.
NOTE:
• The battery charger is for charging Makita-battery cartridge.
Never use it for other purposes or for other manufacturer’s
batteries.
• When you charge a battery cartridge which is new or has not
been used for a long period of time, it may not accept a full
charge until after discharging it completely and recharging a
couple of times. (Ni-MH battery only)
• If charging light may flash in red color, battery condition is as
below and charging may not start.
– Battery cartridge from just-operated tool or battery cartridge
that has been left in a location exposed to direct sunlight for a
long time.
– Battery cartridge that has been left for a long time in a location
exposed to cold air.
When the battery cartridge is too hot, charging will begin after
the cooling fan installed in the charger cools the battery car-
tridge. Charging will begin after the battery cartridge tempera-
ture reaches the degree at which charging is possible.
• If the charging light flashes alternately in green and red color,
charging is not possible. The terminals on the charger or battery
cartridge are clogged with dust or the battery cartridge is worn
out or damaged.
Cooling system
• This charger is equipped with cooling fan for heated battery in
order to enable the battery to prove its own performance. Sound
of cooling air comes out during cooling, which means no trouble
on the charger.
• Yellow light will flash for warning in the following cases.
– Trouble on cooling fan
– Incomplete cool down of battery, such as, being clogged with
dust
The battery can be charged in spite of the yellow warning light.
But the charging time will be longer than usual in this case.
Check the sound of cooling fan, vent on the charger and battery,
which can be sometime clogged with dust.
• The cooling system is in order although no sound of cooling fan
comes out, if the yellow warning light will not flash.
• Always keep clean the vent on charger and battery for cooling.
• The products should be sent to repair or maintenance, if the
yellow warning light will frequently flash.
Conditioning charge
Conditioning charge can extend the life of battery by automatically
searching the optimum charging condition for the batteries in every
situation.
The battery employed in the following conditions repeatedly
requires “conditioning charge” to prevent fast wear out. In that
case, yellow light lights up.
1. Recharge of battery with its high temperature
2. Recharge of battery with its low temperature
3. Recharge of full charged battery
4. Over-discharge of battery (continue to discharge battery in
spite of down of power.)
The charging time of such battery is longer than usual.
Voltage 9.6 V 12 V 14.4 V Capacity (Ah) Charging time (Minutes)
Number of cells 8 10 12
Ni-MH Battery
cartridge
B9017A — — 1.7 20
BH9020/A — — 1.8 (IEC61951-2) 20
— BH1220/C BH1420 1.8 (IEC61951-2) 15
— — BH1427 2.5 (IEC61951-2) 20
BH9033/A — — 3.1 (IEC61951-2) 30
— BH1233/C BH1433 3.1 (IEC61951-2) 22
Voltage 14.4 V 18 V 14.4 V 18 V Capacity (Ah)
according to
IEC61960
Charging time
(Minutes)
Number of cells 4 5 8 10
Li-ion Battery
cartridge
BL1415 BL1815 — — 1.3 15
— —
BL1430/
BL1430A/
BL1430B
BL1830/
BL1830B 3.0 22
BL1415N/
BL1415NA BL1815N — — 1.5 15
—BL1820/
BL1820B — — 2.0 24
— — BL1440 BL1840/
BL1840B 4.0 36
— — BL1450 BL1850/
BL1850B 5.0 45
— — BL1460A/
BL1460B BL1860B 6.0 55

Specyfikacje produktu

Marka: Makita
Kategoria: Ładowarka baterii
Model: DC18RD

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Makita DC18RD, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Ładowarka baterii Makita

Makita

Makita DC1414 Instrukcja

9 Października 2024
Makita

Makita DC24SC Instrukcja

9 Października 2024
Makita

Makita DC1822 Instrukcja

7 Października 2024
Makita

Makita DC18RD Instrukcja

4 Października 2024
Makita

Makita ADP04 Instrukcja

3 Października 2024
Makita

Makita DC40RA Instrukcja

18 Września 2024
Makita

Makita DC10SB Instrukcja

14 Września 2024
Makita

Makita DC18RC Instrukcja

5 Lipca 2024

Instrukcje Ładowarka baterii

Najnowsze instrukcje dla Ładowarka baterii

MSW

MSW S-CHARGER-20A.2 Instrukcja

15 Października 2024
MSW

MSW S-CHARGER-10A.2 Instrukcja

15 Października 2024
Intenso

Intenso Powerbank 10400 Instrukcja

14 Października 2024
Gembird

Gembird CHM-03 Instrukcja

10 Października 2024
Kostal

Kostal IQ 8.5 Instrukcja

9 Października 2024
Venom

Venom VS5007 Instrukcja

9 Października 2024
Venom

Venom VS5010 Instrukcja

9 Października 2024
Venom

Venom VS2891 Instrukcja

9 Października 2024
Venom

Venom VS2881 Instrukcja

9 Października 2024
Venom

Venom VS2883 Instrukcja

9 Października 2024