Instrukcja obsługi Mackie PPM1008

Mackie odbiornik PPM1008

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Mackie PPM1008 (32 stron) w kategorii odbiornik. Ta instrukcja była pomocna dla 13 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/32

O W N E R ’ S M A N U A L

FOOT SWITCH

2 X 800W PROFESSIONAL POWERED MIXER

PPM1008

8-Channel, 2 x 800 W Professional Powered Mixer

PPM1008

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with a dry cloth.

7. Do not block any ventilation openings. Install in accordance with the

manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat registers,

stoves, or other apparatus (including ampliﬁers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type

plug. A polarized plug has two blades with one wider than the other.

A grounding-type plug has two blades and a third grounding prong.

The wide blade or the third prong are provided for your safety. If the

provided plug does not ﬁt into your outlet, consult an electrician for

replacement of the obsolete outlet.

10.

Protect the power cord from being walked on or pinched particularly at

plugs, convenience receptacles, and the point where they exit from the

apparatus.

11.

Only use attachments/accessories speciﬁed by the manufacturer.

12.

Unplug this apparatus during lightning storms or when unused for long

periods of time.

13.

Refer all servicing to qualiﬁed service personnel. Servicing is required

when the apparatus has been damaged in any way, such as power-

supply cord or plug is damaged, liquid has been spilled or objects have

fallen into the apparatus, the apparatus has been exposed to rain or

moisture, does not operate normally, or has been dropped.

14.

Do not overload wall outlets and extension cords as this can result in a

risk of ﬁre or electric shock.

15.

This apparatus shall not be exposed to dripping or splashing, and no

object ﬁlled with liquids, such as vases or beer glasses, shall be placed

on the apparatus.

16.

This apparatus has been designed with Class-I construction and must

be connected to a mains socket outlet with a protective earthing con-

nection (the third grounding prong).

17.

This apparatus has been equipped with an all-pole, rocker-style AC

mains power switch. This switch is located on the rear panel and

should remain readily accessible to the user.

CAUTION AVIS

RISK OF ELECTRIC . DO NOT OPENSHOCK

RISQUE DE ELECTRIQUE. NE PAS OUVRIRCHOC

CAUTION: REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK)TO

NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING QUALIFIED PERSONNELTO

ATTENTION: POUR EVITER LES RISQUES DE CHOC ELECTRIQUE, NE PAS ENLEVER LE COUVERCLE.

AUCUN ENTRETIEN DE PIECES INTERIEURES PAR L'USAGER.

CONFIER L'ENTRETIEN AU PERSONNEL QUALIFIE.

AVIS: POUR EVITER LES RISQUES D'INCENDIE OU D'ELECTROCUTION, N'EXPOSEZ S CET TICLE PA AR

A A LA PLUIE OU L'HUMIDITE

The lightning flash with arrowhead symbol within an equilateral triangle is

intended to alert the user to the presence of uninsulated "dangerous

voltage" within the product's enclosure, that may be of sufficient magnitude

to constitute a risk of electric shock to persons.

Le symbole éclair avec point de flèche à l'intérieur d'un triangle équilatéral

est utilisé pour alerter l'utilisateur de la présence à l'intérieur du coffret de

"voltage dangereux" non isolé d'ampleur suffisante pour constituer un risque

d'éléctrocution.

The exclamation point within an equilateral triangle is intended to alert the

user of the presence of important operating and maintenance (servicing)

instructions in the literature accompanying the appliance.

Le point d'exclamation à l'intérieur d'un triangle équilatéral est employé

pour alerter les utilisateurs de la présence d'instructions importantes pour le

fonctionnement et l'entretien (service) dans le livret d'instruction

accompagnant l'appareil.

WARNING — To reduce the risk of ﬁre or electric shock, do not

expose this apparatus to rain or moisture.

18. NOTE: This equipment has been tested and found to comply with

the limits for a Class B digital device, pursuant to part 15 of the FCC

Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equip-

ment generates, uses, and can radiate radio frequency energy and, if

not installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and

on, the user is encouraged to try to correct the interference by one or

more of the following measures:

• Reorientorrelocatethereceivingantenna.

• Increasetheseparationbetweentheequipmentandthe

receiver.

• Connecttheequipmentintoanoutletonacircuitdifferentfrom

that to which the receiver is connected.

• Consultthedealeroranexperiencedradio/TVtechnicianfor

help.

CAUTION: Changes or modiﬁcations to this device not expressly

approved by LOUD Technologies Inc. could void the user's authority to

operate the equipment under FCC rules.

19.

This apparatus does not exceed the Class A/Class B (whichever is

applicable)

limits for radio noise emissions from digital apparatus as

set out in the radio interference regulations of the Canadian Department

of Communications.

ATTENTION — Le présent appareil numérique n’émet pas de bruits

radioélectriques dépassant las limites applicables aux appareils numériques de

class A/de class B (selon le cas) prescrites dans le réglement sur le brouillage

radioélectrique édicté par les ministere des communications du Canada.

20.

Exposure to extremely high noise levels may cause permanent hearing

loss. Individuals vary considerably in susceptibility to noise-induced

hearing loss, but nearly everyone will lose some hearing if exposed to

sufﬁciently intense noise for a period of time. The U.S. Government’s

Occupational Safety and Health Administration (OSHA) has speciﬁed

the permissible noise level exposures shown in the following chart.

According to OSHA, any exposure in excess of these permissible limits

could result in some hearing loss. To ensure against potentially danger-

ous exposure to high sound pressure levels, it is recommended that all

persons exposed to equipment capable of producing high sound pres-

sure levels use hearing protectors while the equipment is in operation.

Ear plugs or protectors in the ear canals or over the ears must be worn

when operating the equipment in order to prevent permanent hearing

loss if exposure is in excess of the limits set forth here.

Duration,

per day in

hours

Sound Level

dBA, Slow

Response

Typical Example

8 90 Duo in small club

6 92

4 95 Subway Train

3 97

2 100 Veryloudclassicalmusic

1.5 102

1 105 Greg and Ben screaming at Troy about deadlines

0.5 110

0.25 or less 115 Loudest parts at a rock concert

Correct disposal of this product. This symbol indicates that this product should not be disposed of with your household waste, according to the WEEE Directive (2012/19/EU) and your national law. This product

should be handed over to an authorized collection site for recycling waste electrical and electronic equipment (EEE). Improper handling of this type of waste could have a possible negative impact on the environment and

human health due to potentially hazardous substances that are generally associated with EEE. At the same time, your cooperation in the correct disposal of this product will contribute to the effective usage of natural

resources. For more information about where you can drop off your waste equipment for recycling, please contact your local city ofﬁce, waste authority, or your household waste disposal service.

Important Safety Instructions

Owner’s Manual

Part No. SW0685 Rev. F 12.2013

Episode 3: The Mackie marketing department landing party arrives on

Aldebaran 3 to investigate a distress signal, with hilarious results.

Ready, steady, go!

1. Turn the channel level, mon 1, and FX/mon 2

controls fully down.

2. Turn down the compressor controls (ch. 1–4).

3. Set all the EQ controls to the center, including

the graphic EQ sliders.

4. Turn down the main level and monitor 1 level

controls.

5. For each channel, press the gain switch in (low

gain) if you are using a line-level source. Press

it out (high gain) if you are using a microphone

or other low-level source.

6. For condenser mics, push in the phantom

power switch. If you are using both condenser

and dynamic mics, don’t worry. Phantom power

will not hurt most dynamic mics. Check the

micro phone’s user manual if you’re not sure.

7. Play something into an input at real-world

levels, and turn up the channel level to

U (unity).

8. In normal playing, the channel's OL LED should

only light occasionally. If it stays on for a large

portion of your performance, check that the

gain switch is set correctly.

9. Slowly turn up the main level control until you

hear the signal in your speakers.

10. Repeat steps 5 to 8 for the remaining channels.

11. If needed, apply some EQ wisely.

12. Adjust the levels to get the best mix. Keep the

level controls fully down on unused channels.

Other Notes

• Onlyconnectthepoweredmixer'sspeaker-level

outputs to passive loudspeakers.

• Whenshuttingdown,turnoffanyexternal

ampliﬁers or powered loudspeakers ﬁrst. When

powering up, turn on any external ampliﬁers or

powered loudspeakers last.

• Savetheshippingbox!

Read This Page!

We realize that you must be keen to try

out your new powered mixer, but please

read the safety instructions on page 2,

and this page ﬁrst.

Setup

The PPM1008 powered mixer is designed to be easy to

operate, and to be set up quickly.

Place the powered mixer in a position where it is easy

to reach the controls. All the controls and input

connection points are located on the front panel so you

can make quick adjustments and connections on stage.

Make sure there is at least 6 inches of airspace behind

the powered mixer for ventilation. There are two fans

inside the cabinet to cool the power ampliﬁer section.

Use the powered mixers in a nice clean and dry

environment, free from dryer lint and dust bunnies.

Connections

1. Be sure the rear-panel power switch is off

before making any connections.

2. Push the linecord securely into the IEC

connector on the rear panel, and plug it into a

3-prong AC outlet that is properly conﬁgured

for the voltage of your powered mixer.

3. Plug a balanced microphone into one of the mic

XLR (3-pin) connectors on the front panel. Or

you can connect any line-level signal

(keyboard, or guitar preamp) to a line-level

input using a TS or a TRS 1/4" plug.

4. You can connect a guitar directly to inputs 5 or

6 without need for a DI box, if you press the hi-z

switch on these channels.

5. The insert jacks can be used to connect an

external effects or dynamics processor into the

signal chain. See page 13 for more details.

6. Plug the speakers (4 ohms or greater) into the

speaker output jacks on the rear panel. If you

plug two speakers in one side, each speaker

must be 8 ohms or greater to maintain a 4-ohm

minimum load on the ampliﬁer. Use at least

18 gauge speaker cable with 1/4" TS plugs or

Speakon® plugs. For now, set the rear panel

power amp mode switch to stereo mains.

Don’tuseguitarcordsforspeakercables!

They’re not designed to handle speaker-level

signals and could overheat.

Please write your serial number here for future

reference (i.e., insurance claims, tech support,

return authorization, make dad proud, etc.)

Purchased at:

Date of purchase:

Specyfikacje produktu

Marka:	Mackie
Kategoria:	odbiornik
Model:	PPM1008

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Mackie PPM1008, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje odbiornik Mackie

Mackie MX3500 Instrukcja

5 Lipca 2024

Mackie PPM1008 Instrukcja

5 Lipca 2024

Mackie HM-800 Instrukcja

4 Lipca 2024

Instrukcje odbiornik

Najnowsze instrukcje dla odbiornik

Denon AVR-S900W Instrukcja

15 Października 2024

Pro-Ject Amp Box DS2 Instrukcja

15 Października 2024

AKG HP12U Instrukcja

15 Października 2024

Apart SBR160 Instrukcja

14 Października 2024

American Audio VLP 600 Instrukcja

14 Października 2024

Chord Anni Instrukcja

14 Października 2024

Sennheiser EM 9046 SU Instrukcja

14 Października 2024

Yamaha MusicCast RX-V481 Instrukcja

13 Października 2024

JL Audio VX600/6i Instrukcja

12 Października 2024

Pioneer SX-303RDS Instrukcja

10 Października 2024