Instrukcja obsługi Mackie MX2500

Mackie odbiornik MX2500

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Mackie MX2500 (20 stron) w kategorii odbiornik. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/20
O W N E R ’ S M A N U A L
Professional Power Amplifiers
MX2500 MX3500
MX Series Professional Power Amplifiers
2MX Series Professional Power Amplifiers
Important Safety Instructions
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in accordance
with the manufacturer’s instructions.
8. Minimum distance (5 cm) around the apparatus for sucient ventilation.
The ventilation should not be impeded by covering the ventilation openings
with items, such as newspapers, table-cloths, curtains, etc.
9. Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
10. No naked flame sources, such as lighted candles, should be placed
on the apparatus.
11. Do not defeat the safety purpose of the polarized or grounding-type plug.
A polarized plug has two blades with one wider than the other. A grounding-type
plug has two blades and a third grounding prong. The wide blade or the third
prong are provided for your safety. If the provided plug does not fit into your
outlet, consult an electrician for replacement of the obsolete outlet.
12. Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
13. Only use attachments/accessories specified by the manufacturer.
14. Use only with a cart, stand, tripod, bracket, or table
specified by the manufacturer, or sold with the apparatus.
When a cart is used, use caution when moving the cart/
apparatus combination to avoid injury from tip-over.
15. Unplug this apparatus during lightning storms or when
unused for long periods of time.
16. Refer all servicing to qualified service personnel. Servicing
is required when the apparatus has been damaged in any
way, such as power-supply cord or plug is damaged, liquid has been spilled or
objects have fallen into the apparatus, the apparatus has been exposed to rain
or moisture, does not operate normally, or has been dropped.
17. This apparatus shall not be exposed to dripping or splashing, and no object filled
with liquids, such as vases or beer glasses, shall be placed on the apparatus.
18. Do not overload wall outlets and extension cords as this can result in a risk
of fire or electric shock.
PORTABLE CART
WARNING
CAUTION
The lightning flash with arrowhead symbol within an equilateral
triangle is intended to alert the user to the prescence of uninsulated
“dangerous voltage” within the product’s enclosure, that may be of
significant magnitude to constitute a risk of electric shock to persons.
RISK OF ELECTRIC SHOCK! DO NOT OPEN!
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED PERSONNEL.
The exclamation point within an equilateral triangle is intended
to alert the user of the prescence of important operating and
maintaining (servicing) instructions in the literature accompanying
the appliance.
WARNING — To reduce the risk of fire or electric shock, do not
expose this apparatus to rain or moisture.
CAUTION — To prevent electric shock hazard, do not connect
to mains power supply while grille is removed.
Laite on liitettävä suojakoskettimilla varustettuun pistorasiaan.
Apparatet må tilkoples jordet stikkontakt.
Apparaten skall anslutas till jordat uttag.
19. This apparatus has been designed with Class-I construction and
must be connected to a mains socket outlet with a protective earthing
connection (the third grounding prong).
20. This apparatus has been equipped with a rocker-style AC mains power
switch. This switch is located on the front panel and should remain readily
accessible to the user.
21. The MAINS plug or an appliance coupler is used as the disconnect device,
so the disconnect device shall remain readily operable.
22. The use of apparatus is in tropical and/or moderate climates.
23. NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment o and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit dierent from
that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications to this device not expressly approved CAUTION:
by LOUD Audio, LLC could void the users authority to operate the equipment
under FCC rules.
24. This apparatus does not exceed the Class A/Class B (whichever
is applicable) limits for radio noise emissions from digital apparatus
as set out in the radio interference regulations of the Canadian Department
of Communications.
ATTENTION
— Le présent appareil numérique n’émet pas de bruits
radioélectriques dépassant las limites applicables aux appareils
numériques de class A/de class B (selon le cas) prescrites dans
le réglement sur le brouillage radioélectrique édicté par les ministere
des communications du Canada.
25. Exposure to extremely high noise levels may cause permanent hearing loss.
Individuals vary considerably in susceptibility to noise-induced hearing loss,
but nearly everyone will lose some hearing if exposed to suciently intense
noise for a period of time. The U.S. Government’s Occupational Safety and
Health Administration (OSHA) has specified the permissible noise level
exposures shown in the following chart.
According to OSHA, any exposure in excess of these permissible limits
could result in some hearing loss. To ensure against potentially dangerous
exposure to high sound pressure levels, it is recommended that all persons
exposed to equipment capable of producing high sound pressure levels
use hearing protectors while the equipment is in operation. Ear plugs or
protectors in the ear canals or over the ears must be worn when operating
the equipment in order to prevent permanent hearing loss if exposure is in
excess of the limits set forth here:
Duration, per
day in hours
Sound Level dBA,
Slow Response Typical Example
8 90 Duo in small club
6 92
4 95 Subway Train
3 97
2 00 Very loud classical music
.5 02
05 Matt screaming at Troy about deadlines
0.5 0
0.25 or less 5 Loudest parts at a rock concert
Correct disposal of this product: This symbol indicates that this product should not be disposed of with your household waste, according to the WEEE directive (202/9/EU)
and your national law. This product should be handed over to an authorized collection site for recycling waste electrical and electronic equipment (EEE). Improper handling of this type of waste
could have a possible negative impact on the environment and human health due to potentially hazardous substances that are generally associated with EEE. At the same time, your cooperation
in the correct disposal of this product will contribute to the eective usage of natural resources. For more information about where you can drop o your waste equipment for recycling, please
contact your local city oce, waste authority, or your household waste disposal service.
Owners Manual
3
Owners Manual
Contents Features
Part No. SW1269 Rev. A 01/19
©2019 LOUD Audio, LLC. All Rights Reserved.
Aordable, reliable power perfect for DRM Series Passive
Loudspeakers, installations, and production audio systems
Ultra-lightweight switching power supply for maximum
eciency and minimal heat
Forced-air ventilation keeps the amplifier running cool
MX2500 Power output:
o 500W Continuous power @8 per channelΩ
o 750W Continuous power @4 per channelΩ
o 1500W Continuous power @ 8 bridgedΩ
MX3500 Power output:
o 1000W Continuous power @8 per channelΩ
o 1350W Continuous power @4 per channelΩ
o 2700W Continuous power @ 8 bridgedΩ
Selectable parallel/stereo/bridged operating modes
Independent level control per channel
Selectable input sensitivity
Signal, Clip, and Fault LEDs per channel
Short, under-impedance, over-current and thermal protection
XLR Input and Thru per channel
NL4 outputs
Robust, impact-resistant, all-steel 2U rackmount chassis
Not available in the USA, Canada, China, Japan and other
100 – 120V countries
Like us
Follow us
Watch our dang videos
Important Safety Instructions 2 ...........................................
Contents / Features 3 ............................................................
Introduction / Getting Started 4 ...........................................
Hookup Diagrams 5 ...............................................................
MX Series Amplifiers: Rear Panel Features.....................10
1. Power Connection 10 ...................................................
2. Circuit Breaker .......................................................10
3. XLR Inputs 10 ..............................................................
4. XLR Thru Outputs 10 ...................................................
5. NL4 Speaker Outputs 10 .............................................
6. Amp Mode Switch................................................... 11
7. Sensitivity Switch 11 ...................................................
8. Fan Vents 11 ................................................................
MX Series Amplifiers: Front Panel Features 12 ....................
9. Power Switch 12 ..........................................................
10. Level Controls 12 .......................................................
11. LEDs 12 .......................................................................
General Precautions 13 ..........................................................
AC Power Requirements 13 ............................................
Thermal Considerations 13 ............................................
Rack Mounting 13 ...........................................................
Care and Maintenance 13 ......................................................
Appendix A: Service Information 14 ......................................
Appendix B: Technical Information 16 ..................................
MX Series Amplifiers Dimensions.............................17
MX Series Amplifiers Block Diagram 18 ........................
Limited Warranty 19 ...............................................................


Specyfikacje produktu

Marka: Mackie
Kategoria: odbiornik
Model: MX2500

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Mackie MX2500, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje odbiornik Mackie

Instrukcje odbiornik

Najnowsze instrukcje dla odbiornik