Instrukcja obsługi Mackie MR10Smk3

Mackie subwoofer MR10Smk3

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Mackie MR10Smk3 (16 stron) w kategorii subwoofer. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/16

O W N E R ’ S M A N U A L

Powered Studio Subwoofer

MR10Smk3

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with a dry cloth.

7. Do not block any ventilation openings. Install in accordance with the

manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat registers,

stoves, or other apparatus (including ampliﬁers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type

plug. A polarized plug has two blades with one wider than the other.

A grounding-type plug has two blades and a third grounding prong.

The wide blade or the third prong are provided for your safety. If the

provided plug does not ﬁt into your outlet, consult an electrician for

replacement of the obsolete outlet.

10.

Protect the power cord from being walked on or pinched particularly at

plugs, convenience receptacles, and the point where they exit from the

apparatus.

11.

Only use attachments/accessories speciﬁed by the manufacturer.

12.

Use only with a cart, stand, tripod, bracket, or

table speciﬁed by the manufacturer, or sold with

the apparatus. When a cart is used, use caution

when moving the cart/apparatus combination to

avoid injury from tip-over.

13.

Unplug this apparatus during lightning storms or

when unused for long periods of time.

14.

Refer all servicing to qualiﬁed service personnel. Servicing is required

when the apparatus has been damaged in any way, such as power-

supply cord or plug is damaged, liquid has been spilled or objects have

fallen into the apparatus, the apparatus has been exposed to rain or

moisture, does not operate normally, or has been dropped.

15.

This apparatus shall not be exposed to dripping or splashing, and no

object ﬁlled with liquids, such as vases or beer glasses, shall be placed

on the apparatus.

16.

Do not overload wall outlets and extension cords as this can result in a

risk of ﬁre or electric shock.

17.

This apparatus has been designed with Class-I construction and must

be connected to a mains socket outlet with a protective earthing con-

nection (the third grounding prong).

18.

This apparatus has been equipped with a rocker-style AC mains power

switch. This switch is located on the rear panel and should remain

readily accessible to the user.

19.

The MAINS plug or an appliance coupler is used as the disconnect

device, so the disconnect device shall remain readily operable.

PORTABLE CART

WARNING

CAUTION

The lightning ﬂash with arrowhead symbol within

an equilateral triangle is intended to alert the user

to the prescence of uninsulated “dangerous voltage”

within the product’s enclosure, that may be of signiﬁcant magnitude

to constitute a risk of electric shock to persons.

RISK OF ELECTRIC SHOCK! DO NOT OPEN!

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT

REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED PERSONNEL.

The exclamation point within an equilateral triangle is

intended to alert the user of the prescence of important

operating and maintaining (servicing) instructions in the

literature accompanying the appliance.

20. NOTE: This equipment has been tested and found to comply with

the limits for a Class B digital device, pursuant to part 15 of the FCC

Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equip-

ment generates, uses, and can radiate radio frequency energy and, if

not installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and

on, the user is encouraged to try to correct the interference by one or

more of the following measures:

• Reorientorrelocatethereceivingantenna.

• Increasetheseparationbetweentheequipmentandthereceiver.

• Connecttheequipmentintoanoutletonacircuitdifferentfrom

that to which the receiver is connected.

• Consultthedealeroranexperiencedradio/TVtechnicianforhelp.

CAUTION: Changes or modiﬁcations to this device not expressly

approved by LOUD Technologies Inc. could void the user's authority to

operate the equipment under FCC rules.

21.

This apparatus does not exceed the Class A/Class B (whichever is

applicable)

limits for radio noise emissions from digital apparatus as

set out in the radio interference regulations of the Canadian Department

of Communications.

ATTENTION — Le présent appareil numérique n’émet pas de bruits

radioélectriques dépassant las limites applicables aux appareils

numériques de class A/de class B (selon le cas) prescrites dans le

réglement sur le brouillage radioélectrique édicté par les ministere des

communications du Canada.

22.

Exposure to extremely high noise levels may cause permanent hearing

loss. Individuals vary considerably in susceptibility to noise-induced

hearing loss, but nearly everyone will lose some hearing if exposed to

sufﬁciently intense noise for a period of time. The U.S. Government’s

Occupational Safety and Health Administration (OSHA) has speciﬁed

the permissible noise level exposures shown in the following chart.

According to OSHA, any exposure in excess of these permissible limits

could result in some hearing loss. To ensure against potentially danger-

ous exposure to high sound pressure levels, it is recommended that all

persons exposed to equipment capable of producing high sound pres-

sure levels use hearing protectors while the equipment is in operation.

Ear plugs or protectors in the ear canals or over the ears must be worn

when operating the equipment in order to prevent permanent hearing

loss if exposure is in excess of the limits set forth here:

Duration,

per day in

hours

Sound Level

dBA, Slow

Response

Typical Example

8 90 Duo in small club

6 92

4 95 Subway Train

3 97

2 100 Veryloudclassicalmusic

1.5 102

1 105 The Ballard Mallard screaming at

desTROYer about deadlines

0.5 110

0.25 or less 115 Loudest parts at a rock concert

WARNING — To reduce the risk of ﬁre or electric shock, do not

expose this apparatus to rain or moisture.

CAUTION — To prevent electric shock hazard, do not connect

to mains power supply while grille is removed.

Laite on liitettävä suojakoskettimilla varustettuun pistorasiaan.

Apparatet må tilkoples jordet stikkontakt.

Apparaten skall anslutas till jordat uttag.

Important Safety Instructions

Part No. SW0980 Rev. B 12/13

Owner’s Manual

Contents MR10Smk3 Features

•

Powerful, deep extended bass for your

MRmk3 studio monitors

•

Designed for high-output and superior low-frequency

performance

•

120 watts of Class A/B ampliﬁcation

•

10" glass aramid composite woofer

•

Shelf-ported for satisfying, deep low end

•

Stereo XLR and TRS connection offer input ﬂexibility

•

Stereo balanced TRS outputs for connection to mains

•

Adjustable 40 Hz to 180 Hz crossover point

•

Polarity switch (0˚ / 180˚)

•

Rugged all-wood cabinet design built to last

•

Vibration-absorbing rubber feet minimize

undesirable resonances

•

Low-proﬁle, soft-mesh grille cloth delivers

a sleek studio look

•

Allows your mains to focus on highs/mids

for optimum studio performance

Like us

Watch our dang videos

Please write your serial number here for future

reference (i.e., insurance claims, tech support,

return authorization, make dad proud, etc.)

Purchased at:

Date of purchase:

IMPORTANT SAFETY INSTRUCTIONS ...............................................2

CONTENTS / FEATURES ...................................................................3

INTRODUCTION ...............................................................................4

QUICK START ...................................................................................5

REAR PANEL DESCRIPTION .............................................................6

1. POWER CONNECTION AND FUSE .....................................6

2. VOLTAGE SELECTOR SWITCH ............................................ 6

3. POWER SWITCH ..............................................................6

4. SIGNAL INPUTS ................................................................ 6

5. SIGNAL OUTPUTS ............................................................7

6. AUTO POWER SWITCH AND LED ...................................... 7

7. POLARITY SWITCH ........................................................... 7

8. CROSSOVER LEVEL...........................................................7

9. INPUT LEVEL ....................................................................7

10. CUSTOM-TUNED REAR SHELF PORT ...............................7

PROTECTION CIRCUITS ....................................................................8

OVEREXCURSION PROTECTION ...........................................8

THERMAL PROTECTION ........................................................ 8

INTEGRATED MAGNETIC SHIELDING .....................................8

INPUT SIGNAL WIRING ........................................................ 8

CARE AND CLEANING ......................................................................8

THE INS AND OUTS OF POLARITY .................................................... 9

APPENDIX A: SERVICE INFO ..........................................................10

TROUBLESHOOTING 10 ...........................................................

REPAIR 11 ...............................................................................

APPENDIX B: CONNECTORS ...........................................................12

APPENDIX C: TECHNICAL INFORMATION .......................................13

MR10Smk3 SPECIFICATIONS .................................................13

MR10Smk3 DIMENSIONS .....................................................14

MR10Smk3 BLOCK DIAGRAM ...............................................14

MR10Smk3 LIMITED WARRANTY .................................................. 15

Specyfikacje produktu

Marka:	Mackie
Kategoria:	subwoofer
Model:	MR10Smk3

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Mackie MR10Smk3, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje subwoofer Mackie

Mackie CR8SBT Instrukcja

4 Stycznia 2025

Mackie HD1801 Instrukcja

1 Września 2024

Mackie MRS10 Instrukcja

30 Sierpnia 2024

Mackie HD1501 Instrukcja

27 Sierpnia 2024

Mackie SRM1801 Instrukcja

24 Sierpnia 2024

Mackie MR10Smk3 Instrukcja

14 Sierpnia 2024

Mackie DRM18S Instrukcja

13 Sierpnia 2024

Mackie SRM 1850 Instrukcja

6 Sierpnia 2024

Instrukcje subwoofer

Najnowsze instrukcje dla subwoofer

Pioneer TS-W257D2 Instrukcja

13 Stycznia 2025

Vonyx SWP15 Instrukcja

13 Stycznia 2025

Kicker 51MWF104 Instrukcja

13 Stycznia 2025

Kicker 51MWF124 Instrukcja

13 Stycznia 2025

Kicker 48CWR154 Instrukcja

12 Stycznia 2025

Deaf Bonce Machete MFX30D2 Instrukcja

11 Stycznia 2025

Kicker 51MWE104 Instrukcja

10 Stycznia 2025

Kicker 51MWE124 Instrukcja

10 Stycznia 2025

Phoenix Gold ZP12D4 Instrukcja

9 Stycznia 2025

Phoenix Gold ZP12D2 Instrukcja

9 Stycznia 2025