Instrukcja obsługi Luxman LX-380

Luxman system hi-fi LX-380

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Luxman LX-380 (24 stron) w kategorii system hi-fi. Ta instrukcja była pomocna dla 9 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/24
Owne sr`
Manual
VACUUM TUBE INTEGRATED AMPLIFIER
LX-380
Contents
Precautions 1 ·············································································································
Features of This Unit 2 ································································································
Names and Functions 4 ······························································································
Connections 10 ··········································································································
Operations 14 ·············································································································
How to Use Remote Control 15 ··················································································
Block Diagram 16 ·······································································································
Specifications 17 ········································································································
Before Asking for Repair Service 18 ············································································
VACUUM TUBE INTEGRATED AMPLIFIER LX-380
1
Precautions
Installation place
Install this unit in a location where good ventilation and heat
radiation are assured.
Especially, the installation of this unit where the direct sun-
light is present, where the temperature rises excessively
high such as close to a heater, or where it is humid or dusty
may cause a malfunction even if heat is efficiently released.
Therefore, do not install this unit in such places.
Ventilation holes
Do not block the ventilation holes of the top and bottom
panels. If the amplifier is installed on a rack or the like, se-
cure ample space for cooling and leave the door open. Do
not pile up other things on the amplifier and never put arti-
cles on it. Failure to observe this may cause a malfunction.
Note:
For heat dispersal, do not install this equipment in a con-
fined space such as a book case or similar unit.
*Note
Wall
* *
*
Precautions in connecting with other
components
When connecting this unit to input devices such as a CD
player, an SACD player, an analog player, a tuner, and a re-
corder, be sure to turn off the power of this unit and all other
connected devices. Failure to observe this may generate a
strong noise resulting in speaker damage or cause a mal-
function. The pin-plug to be inserted in each input terminal
of this unit shall be pushed in firmly. If the grounding terminal
is inadequately connected, noises including hum may be
generated, resulting in an adverse S/N ratio.
Batteries
Warning:
Batteries used for the remote control shall not be exposed
to excessive heat such as sunshine, fire or the like.
Cautions in connecting speakers
When making speaker system connections, exercise extra
care not to short-circuit between (+) and (–) of the speaker
terminals and speaker input terminals of this unit. If a large
signal is applied to the amplifier with its circuit left short-cir-
cuited, a large current may be passed through the output
circuit and cause a malfunction.
The sound is not generated shortly after
the power supply is turned on.
This amplifier is equipped with a time muting circuit in order
to separate the output circuit. Therefore, no sound will be
generated shortly after the power supply is turned on.
If the volume control is set to a high sound level before the
time muting circuit is canceled, a large sound is suddenly
generated. Please be advised that the volume control shall
be set to a low level at first and adjusted after the sound
comes out of the speakers.
Repair and adjustment
When repairs or adjustments are needed, please ask the
dealer where you bought the unit.
Cleaning
For cleaning, use a piece of soft cloth to wipe the unit such
as cleaning cloth. When the dirt is hard to remove, use a
small amount of neutral detergent to wipe, and then wipe
the unit with dry cloth. Do not use a solvent like benzine
or thinner because such substances can often damage the
exterior.
Safety caution
Caution
• This unit is heavy. Be careful when unpacking, carrying, and
installation.
• This unit is a vacuum tube control amplifier. Be careful not to
touch this product with your bare hand because it gets hot
when the power is on. For safety, do not use this product in a
place where children or unchained animals are present.
Hot
surface
mark
HOT SURFACE. DO NOT TOUCH.
The top surface over the vacuum tube may become
hot when operating this product continuously.
Do not touch hot areas, especially around the “Hot
surface mark” and the top panel.

Specyfikacje produktu

Marka: Luxman
Kategoria: system hi-fi
Model: LX-380

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Luxman LX-380, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje system hi-fi Luxman

Luxman

Luxman L-509Z Instrukcja

29 Września 2024
Luxman

Luxman C-10X Instrukcja

29 Września 2024
Luxman

Luxman D-10X Instrukcja

22 Września 2024
Luxman

Luxman MQ-88uC Instrukcja

21 Września 2024
Luxman

Luxman L-509X Instrukcja

21 Września 2024
Luxman

Luxman L-505uXII Instrukcja

21 Września 2024
Luxman

Luxman D-N150 Instrukcja

21 Września 2024
Luxman

Luxman D-380 Instrukcja

20 Września 2024
Luxman

Luxman SQ-N150 Instrukcja

20 Września 2024
Luxman

Luxman LX-380 Instrukcja

18 Września 2024

Instrukcje system hi-fi

Najnowsze instrukcje dla system hi-fi

AKAI

AKAI EIE Pro Instrukcja

13 Października 2024
Sharp

Sharp XL-540H Instrukcja

11 Października 2024
Kenwood

Kenwood M-9000S Instrukcja

10 Października 2024
GoGen

GoGen MSC 472 BTDAB Instrukcja

9 Października 2024
Morel

Morel SUB-10X Instrukcja

9 Października 2024
Morel

Morel USUB 803 Instrukcja

9 Października 2024
Morel

Morel Soundsub PSW8e-w Instrukcja

9 Października 2024
Morel

Morel Sopran 934 Instrukcja

9 Października 2024
NAD

NAD M10 V3 Instrukcja

9 Października 2024
NUVO

NUVO NV-MPS4-E Instrukcja

8 Października 2024