Instrukcja obsługi Luxman L-509X

Luxman system hi-fi L-509X

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Luxman L-509X (28 stron) w kategorii system hi-fi. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/28

Owne sr`

Manual

INTEGRATED AMPLIFIER

L-509X

Contents

Precautions 1 ·············································································································

Features of This Unit 2 ································································································

Names and Functions 4 ······························································································

Connections 12 ··········································································································

Operations 16 ·············································································································

How to use Remote Control 18 ··················································································

Block Diagram 20 ·······································································································

Specifications 21 ········································································································

Before Asking for Repair Services 22 ··········································································

INTEGRATED AMPLIFIER L-509X

Precautions

Installation place

This unit shall be installed in a well-ventilated and effectively

heat-released place.

Especially, installation of this unit where direct sunlight is

present, where the temperature rises excessively high such

as close to a heater, or where it is humid or dusty may cause

a malfunction even if heat is efficiently released. Therefore, do

not install this unit in such places.

Ventilation holes

The ventilation holes on the top and bottom boards of this

product must not be blocked. If the amplifier is installed on a

rack or the like, secure ample space for cooling and leave the

door open. Do not pile up other things on the amplifier and

never put articles on it. Failure to observe this may cause a

malfunction.

Note:

For heat dispersal, do not install this equipment in a confined

space such as a book case or similar unit.

* Note

Wall

* *

Precautions in connecting with other

components

When connecting this unit to input devices such as a CD play-

er, an SACD player, a D/A converter, a tuner, and a recorder,

be sure to turn off the power of this unit and all other con-

nected devices. Failure to observe this may generate a strong

noise resulting in speaker damage or cause a malfunction.

The pin-plug to be inserted in each input terminal of this unit

shall be pushed in firmly. If the grounding terminal is inade-

quately connected, noises including hum may be generated,

resulting in an adverse S/N ratio.

Batteries

Warning: Batteries used for the remote control shall not be

exposed to excessive heat such as sunshine, fire or the like.

Cautions in connecting speakers

When making speaker system connections, exercise extra

care not to short-circuit between and of the speaker ! @

terminals and speaker input terminals of this unit.

If a large signal is applied to the amplifier with its circuit left

short-circuited, a large current may be passed through the

output circuit and cause a malfunction.

The sound is not generated shortly after

the power supply is turned on.

This amplifier is equipped with a time muting circuit in order

to separate the output circuit. Therefore, no sound will be

generated shortly after the power supply is turned on.

If the volume control is set to a high sound level before the

time muting circuit is canceled, a large sound is suddenly

generated. Please be advised that the volume control shall be

set to a low level at first and adjusted after the sound comes

out of the speakers.

Protection circuit

This product is equipped with a protection circuit that is ac-

tivated upon detection of overcurrent, abnormally high tem-

perature, and DC drift to protect the amplifier and speakers.

When the protection circuit is activated, the output to the

speaker terminal is shut off and the standby indicator blinks

to show that this unit is in the muting state. If the protection

circuit is frequently activated even when disconnecting the

AC plug from the wall outlet, waiting for a certain time, con-

necting the plug to the wall outlet again, and turning on the

power again, please consult your dealer.

Repair and adjustment

When repairs or adjustments are needed, please ask the

dealer where you bought the unit.

Cleaning

For cleaning, use a piece of soft cloth to wipe the unit such as

cleaning cloth. When the dirt is hard to remove, use a small

amount of neutral detergent to wipe, and then wipe the unit

with dry cloth. Do not use a solvent like benzine or thinner

because such a substance can damage the exterior.

Safety caution

Caution

This unit is heavy. Be careful when unpacking, carrying, and

installation.

If those work are done by yourself, injury may be caused.

Specyfikacje produktu

Marka:	Luxman
Kategoria:	system hi-fi
Model:	L-509X

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Luxman L-509X, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje system hi-fi Luxman

Luxman L-509Z Instrukcja

29 Września 2024

Luxman C-10X Instrukcja

29 Września 2024

Luxman D-10X Instrukcja

22 Września 2024

Luxman MQ-88uC Instrukcja

21 Września 2024

Luxman L-509X Instrukcja

21 Września 2024

Luxman L-505uXII Instrukcja

21 Września 2024

Luxman D-N150 Instrukcja

21 Września 2024

Luxman D-380 Instrukcja

20 Września 2024

Luxman SQ-N150 Instrukcja

20 Września 2024

Luxman LX-380 Instrukcja

18 Września 2024

Instrukcje system hi-fi

Najnowsze instrukcje dla system hi-fi

AKAI EIE Pro Instrukcja

13 Października 2024

Sharp XL-540H Instrukcja

11 Października 2024

Kenwood M-9000S Instrukcja

10 Października 2024

GoGen MSC 472 BTDAB Instrukcja

9 Października 2024

Morel SUB-10X Instrukcja

9 Października 2024

Morel USUB 803 Instrukcja

9 Października 2024

Morel Soundsub PSW8e-w Instrukcja

9 Października 2024

Morel Sopran 934 Instrukcja

9 Października 2024

NAD M10 V3 Instrukcja

9 Października 2024

NUVO NV-MPS4-E Instrukcja

8 Października 2024