Instrukcja obsługi Luxman L-507uX MarkII

Luxman odbiornik L-507uX MarkII

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Luxman L-507uX MarkII (28 stron) w kategorii odbiornik. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/28
Owne sr`
Manual
INTEGRATED AMPLIFIER
L-507uX MARKII
Contents
Precautions 1 ·············································································································
Features of This Unit 2 ································································································
Names and Functions 4 ······························································································
Connections 12 ··········································································································
Operations 16 ·············································································································
How to use Remote Control 18 ··················································································
Block Diagram 20 ·······································································································
Specifications 21 ········································································································
Before Asking for Repair Services 22 ··········································································
1
INTEGRATED AMPLIFIER L-507uX
MARKⅡ
Precautions
Installation place
This unit shall be installed in a well-ventilated and effectively
heat-released place.
Especially, installation of this unit where direct sunlight is
present, where the temperature rises excessively high such
as close to a heater, or where it is humid or dusty may cause
a malfunction even if heat is efficiently released. Therefore, do
not install this unit in such places.
Ventilation holes
The ventilation holes on the top and bottom boards of this
product must not be blocked. If the amplifier is installed on a
rack or the like, secure ample space for cooling and leave the
door open. Do not pile up other things on the amplifier and
never put articles on it. Failure to observe this may cause a
malfunction.
Note:
For heat dispersal, do not install this equipment in a confined
space such as a book case or similar unit.
* Note
Wall
* *
*
Precautions in connecting with other
components
When connecting this unit to input devices such as a CD play-
er, an SACD player, a D/A converter, a tuner, and a recorder,
be sure to turn off the power of this unit and all other con-
nected devices. Failure to observe this may generate a strong
noise resulting in speaker damage or cause a malfunction.
The pin-plug to be inserted in each input terminal of this unit
shall be pushed in firmly. If the grounding terminal is inade-
quately connected, noises including hum may be generated,
resulting in an adverse S/N ratio.
Batteries
Warning: Batteries used for the remote control shall not be
exposed to excessive heat such as sunshine, fire or the like.
Cautions in connecting speakers
When making speaker system connections, exercise extra
care not to short-circuit between and of the speaker ! @
terminals and speaker input terminals of this unit.
If a large signal is applied to the amplifier with its circuit left
short-circuited, a large current may be passed through the
output circuit and cause a malfunction.
The sound is not generated shortly after
the power supply is turned on.
This amplifier is equipped with a time muting circuit in order
to separate the output circuit. Therefore, no sound will be
generated shortly after the power supply is turned on.
If the volume control is set to a high sound level before the
time muting circuit is canceled, a large sound is suddenly
generated. Please be advised that the volume control shall be
set to a low level at first and adjusted after the sound comes
out of the speakers.
Protection circuit
This product is equipped with a protection circuit that is ac-
tivated upon detection of overcurrent, abnormally high tem-
perature, and DC drift to protect the amplifier and speakers.
When the protection circuit is activated, the output to the
speaker terminal is shut off and the standby indicator blinks
to show that this unit is in the muting state. If the protection
circuit is frequently activated even when disconnecting the
AC plug from the wall outlet, waiting for a certain time, con-
necting the plug to the wall outlet again, and turning on the
power again, please consult your dealer.
Repair and adjustment
When repairs or adjustments are needed, please ask the
dealer where you bought the unit.
Cleaning
For cleaning, use a piece of soft cloth to wipe the unit such as
cleaning cloth. When the dirt is hard to remove, use a small
amount of neutral detergent to wipe, and then wipe the unit
with dry cloth. Do not use a solvent like benzine or thinner
because such a substance can damage the exterior.
Safety caution
Caution
This unit is heavy. Be careful when unpacking, carrying, and
installation.
If those work are done by yourself, injury may be caused.

Specyfikacje produktu

Marka: Luxman
Kategoria: odbiornik
Model: L-507uX MarkII

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Luxman L-507uX MarkII, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje odbiornik Luxman

Luxman

Luxman E-250 Instrukcja

1 Stycznia 2025
Luxman

Luxman EQ-500 Instrukcja

1 Stycznia 2025
Luxman

Luxman C-900u Instrukcja

1 Stycznia 2025
Luxman

Luxman M-900u Instrukcja

1 Stycznia 2025
Luxman

Luxman L-507u Instrukcja

1 Stycznia 2025
Luxman

Luxman L-550AX Instrukcja

1 Stycznia 2025
Luxman

Luxman M-700u Instrukcja

1 Stycznia 2025
Luxman

Luxman L-507uX MarkII Instrukcja

1 Stycznia 2025
Luxman

Luxman C-700u Instrukcja

1 Stycznia 2025
Luxman

Luxman L-595ASE Instrukcja

1 Stycznia 2025

Instrukcje odbiornik

Najnowsze instrukcje dla odbiornik

Marantz

Marantz SR-8000 Instrukcja

15 Stycznia 2025
AKAI

AKAI AM-32 Instrukcja

15 Stycznia 2025
Peavey

Peavey CKd 608 Instrukcja

15 Stycznia 2025
OSD Audio

OSD Audio Nero HTX4150 Instrukcja

14 Stycznia 2025
S.M.S.L

S.M.S.L PA200 Instrukcja

14 Stycznia 2025
Pyle

Pyle PFMRA340BB.5 Instrukcja

13 Stycznia 2025
Wavtech

Wavtech link700.4plus Instrukcja

13 Stycznia 2025
Behringer

Behringer NU6000DSP Instrukcja

12 Stycznia 2025
Denon

Denon DRA-935R Instrukcja

12 Stycznia 2025
Kenwood

Kenwood KMM-BT508DAB Instrukcja

12 Stycznia 2025