Instrukcja obsługi Luxman E-250

Luxman odbiornik E-250

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Luxman E-250 (16 stron) w kategorii odbiornik. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/16

Owne sr`

Manual

PHONO AMPLIFIER

E-250

Contents

Precautions 1 ·············································································································

Features of This Unit 2 ································································································

Names and Functions 4 ······························································································

Connections 8 ············································································································

Block Diagram 10 ·······································································································

Specifications 11 ········································································································

Before Asking for Repair Services 12 ··········································································

P H O N O A M P L I F I E R E - 2 5 0

Precautions

Installation place

Install this unit in a location where good ventilation and heat

radiation are assured.

Especially, the installation of this unit where the direct sunlight

is present, where the temperature rises excessively high such

as close to a heater, or where it is humid or dusty may cause

a malfunction even if heat is efficiently released. Therefore, do

not install this unit in such places.

Note:

For heat dispersal, do not install this equipment in a confined

space such as a book case or similar unit.

* Note

Wall

Cautions in connecting cartridges

Connect an analog player or a tone arm with the ground ter-

minal of this unit. If the grounding terminal is inadequately

connected, noises including hum may be generated, resulting

in an adverse effect on the S/N ratio.

The pin plugs to be inserted in the input terminals of this unit

shall be pushed in firmly. If the grounding of the terminal is

inadequately connected, noises including hum may be gener-

ated, resulting in an adverse effect on the S/N ratio.

Precautions in connecting with other

components

When connecting this unit to output device, be sure to turn

off the power switch of this unit and all other connected units.

Failure to observe this may generate a strong noise resulting

in speaker damage or cause a malfunction.

The pin-plugs to be inserted in the input and output terminals

of this unit shall be pushed in firmly. If the grounding termi-

nal is inadequately connected, noises including hum may be

generated, resulting in an adverse effect on the S/N ratio.

The sound is not generated shortly after

the power supply is turned on.

This amplifier is equipped with a time muting circuit in order to

separate the output circuit. Therefore, no sound is generated

shortly after the power supply is turned on.

If the volume control is set to a high sound level before the

time muting circuit is canceled, a large sound will suddenly be

generated. Please be advised that the volume control shall be

set to a low level at first and adjusted after the sound comes

out of the speakers.

Repair and adjustment

When repairs and adjustments are needed, please consult

with the dealer you bought the unit from.

Cleaning

For cleaning, use a piece of soft cloth to wipe the unit such as

cleaning cloth. When the dirt is hard to remove, use a small

amount of neutral detergent to wipe, and then wipe the unit

with dry cloth. Do not use a solvent like benzine or thinner

because such substances can often damage the exterior.

Specyfikacje produktu

Marka:	Luxman
Kategoria:	odbiornik
Model:	E-250

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Luxman E-250, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje odbiornik Luxman

Luxman E-250 Instrukcja

1 Stycznia 2025

Luxman EQ-500 Instrukcja

1 Stycznia 2025

Luxman C-900u Instrukcja

1 Stycznia 2025

Luxman M-900u Instrukcja

1 Stycznia 2025

Luxman L-507u Instrukcja

1 Stycznia 2025

Luxman L-550AX Instrukcja

1 Stycznia 2025

Luxman M-700u Instrukcja

1 Stycznia 2025

Luxman L-507uX MarkII Instrukcja

1 Stycznia 2025

Luxman C-700u Instrukcja

1 Stycznia 2025

Luxman L-595ASE Instrukcja

1 Stycznia 2025

Instrukcje odbiornik

Najnowsze instrukcje dla odbiornik

Marantz SR-8000 Instrukcja

15 Stycznia 2025

AKAI AM-32 Instrukcja

15 Stycznia 2025

Peavey CKd 608 Instrukcja

15 Stycznia 2025

OSD Audio Nero HTX4150 Instrukcja

14 Stycznia 2025

S.M.S.L PA200 Instrukcja

14 Stycznia 2025

Pyle PFMRA340BB.5 Instrukcja

13 Stycznia 2025

Wavtech link700.4plus Instrukcja

13 Stycznia 2025

Behringer NU6000DSP Instrukcja

12 Stycznia 2025

Denon DRA-935R Instrukcja

12 Stycznia 2025

Kenwood KMM-BT508DAB Instrukcja

12 Stycznia 2025