Instrukcja obsługi Lexicon QLI-32

Lexicon edytor QLI-32

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Lexicon QLI-32 (31 stron) w kategorii edytor. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/31
Professional Audio Equipment
O W N E R ’ S M A N U A L
IMPORTANT SAFETY INSTRUCTIONS
SAFETY INSTRUCTIONS
NOTICE FOR CUSTOMERS IF YOUR UNIT IS EQUIPPED WITH A POWER CORD.
WARNING: THIS APPLIANCE SHALL BE CONNECTED TO A MAINS SOCKET
OUTLET WITH A PROTECTIVE EARTHING CONNECTION.
The cores in the mains lead are coloured in accordance with the following code:
GREEN and YELLOW - Earth BLUE - Neutral BROWN - Live
As colours of the cores in the mains lead of this appliance may not cor-
respond with the coloured markings identifying the terminals in your plug,
proceed as follows:
• The core which is coloured green and yellow must be connected to the
terminal in the plug marked with the letter E, or with the earth symbol,
or coloured green, or green and yellow.
• The core which is coloured blue must be connected to the terminal
marked N or coloured black.
• The core which is coloured brown must be connected to the terminal
marked L or coloured red.
This equipment may require the use of a different line cord, attachment
plug, or both, depending on the available power source at installation.
If the attachment plug needs to be changed, refer servicing to qualified
service personnel who should refer to the table below. The green/yellow
wire shall be connected directly to the units chassis.
CONDUCTOR WIRE COLOR
Normal Alt
L LIVE BROWN BLACK
N NEUTRAL BLUE WHITE
E EARTH GND GREEN/YEL GREEN
WARNING: If the ground is defeated, certain fault conditions in the unit
or in the system to which it is connected can result in full line voltage
between chassis and earth ground. Severe injury or death can then result if
the chassis and earth ground are touched simultaneously.
WARNING FOR YOUR PROTECTION
PLEASE READ THE FOLLOWING:
KEEP THESE INSTRUCTIONS
HEED ALL WARNINGS
FOLLOW ALL INSTRUCTIONS
THE APPARATUS SHALL NOT BE EXPOSED TO
DRIPPING OR SPLASHING LIQUID AND NO
OBJECT FILLED WITHI LIQUID, SUCH AS VASES,
SHALL BE PLACED ON THE APPARATUS.
CLEAN ONLY WITH A DRY CLOTH.
DO NOT BLOCK ANY OF THE VENTILATION
OPENINGS. INSTALL IN ACCORDANCE WITH THE
MANUFACTURER’S INSTRUCTIONS.
DO NOT INSTALL NEAR ANY HEAT SOURCES
SUCH AS RADIATORS, HEAT REGISTERS, STOVES,
OR OTHER APPARATUS THAT PRODUCE HEAT.
ONLY USE ATTACHMENTS/ACCESSORIES
SPECIFIED BY THE MANUFACTURER.
UNPLUG THIS APPARATUS DURING LIGHTNING
STORMS OR WHEN UNUSED FOR LONG
PERIODS OF TIME.
Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug
has two blades and a third grounding prong. The wide
blade or third prong are provided for your safety. If
the provided plug does not fit your outlet, consult an
electrician for replacement of the obsolete outlet.
Protect the power cord from being walked on or
pinched particularly at plugs, convenience receptacles,
and the point where they exit from the apparatus.
Use only with the cart stand, tripod bracket, or
table specified by the manufacture, or sold with the
apparatus. When a cart is used, use caution when
moving the cart/apparatus combination to avoid injury
from tip-over.
Refer all servicing to to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has
been exposed to rain or moisture, does not operate
normally, or has been dropped.
MAINS DISCONNECT: The plug shall remain readily
operable. For rack-mount or installation where
plug is not accessible, an all-pole mains switch with a
contact separation of at least 3 mm in each pole shall
be incorporated into the electrical installation of the
rack or building.
FOR UNITS EQUIPPED WITH EXTERNALLY
ACCESSIBLE FUSE RECEPTACLE: Replace fuse with
same type and rating only. Amp slow-blow fuse.1
MULTIPLE-INPUT VOLTAGE: This equipment may
require the use of a different line cord, attachment
plug, or both, depending on the available power
source at installation. Connect this equipment only to
the power source indicated on the equipment rear
panel. To reduce the risk of fire or electric shock, refer
servicing to qualified service personnel or equivalent.
If connected to 240V supply, a suitable CSA/UL
certified power cord shall be used for this supply.
This Equipment is intended for rack mount use only.
ELECTROMAGNETIC COMPATIBILITY
This device complies with part 15 of the FCC Rules and
the Product Specifications noted on the Declaration
of Conformity. Operation is subject to the following
two conditions:
• this device may not cause harmful
interference, and
• this device must accept any interference
received, including interference that may cause
undesired operation.
Operation of this unit within significant electromagnetic
fields should be avoided.
IMPORTANT SAFETY INSTRUCTIONS
DECLARATION OF CONFORMITY
Manufacturer’s Name: Lexicon Pro
Manufacturer’s Address: 10653 South River Front Parkway, Suite 300
South Jordan, UT 84095, USA
declares that the product:
Product name: Lexicon QLI-32 Immersive Processor
Note: Product name may be suffixed by the EU.
Product option: None
conforms to the following Product Specifications:
Safety: IEC 60065 -- 2001:7th ED + AM 1-- 05
UL 60065 -- 2007
CAN/CSA 60065 -- 2003 + AM 1-- 05
EMC: EN 55103:2009
EN 61000--3:2010
EN 55022:2010
EN 61000-4:2010
Supplementary Information:
The product herewith complies with the requirements of the:
Low Voltage Directive 2006/95/EC
EMC Directive 2004/108/EC.
RoHS Directive 2002/95/EC
WEEE Directive 2002/96/EC
With regard to Directive 2005/32/EC and EC Regulation 1275/2008 of 17 December 2008, this
product is designed, produced, and classified as Professional Audio Equipment and thus is exempt from
this Directive.
Jim Pennock
Director of Technology
10653 South River Front Parkway, Suite 300
South Jordan, UT 84095, USA
Date: April 21, 2015
European Contact: Your local Lexicon Sales and Service Office or
Harman Music Group
10653 South River Front Parkway, Suite 300
South Jordan, UT 84095, USA
If y want se is pro , do n it h ral u hold wa e. There a ou to dispo th duct ot mix wit gene ho se st is
sepa ate collectio ys se ec ic od ct acco ance egr n s tem for u d el tron pr u s in rd w h lit isl ti tha on at
r uir pr tr t, r overy a r g.eq es oper ea entm ec nd ecyclin
Private household in the 25 member states of the EU, in Switzerland and Norway may return their used
electronic products free of charge to designated collection facilities or to a retailer (if you purchase a similar
new one).
For Countries not mentioned above, please contact your local authorities for a correct method of disposal.
By doing so you will ensure that your disposed product undergoes the necessary treatment, recovery and
recycling and thus prevent potential negative effects on the environment and human health.
U.K. MAINS PLUG WARNING
A molded mains plug that has been cut off
from the cord us unsafe. Discard the mains plug
at a suitable disposal facility. NEVER UNDER
ANY CIRCUMSTANCES SHOULD YOU INSERT A
DAMAGED OR CUT MAINS PLUG INTO A 13 AMP
POWER SOCKET. Do not use the mains plug
without the cover in place. Replacement fuse
covers can be obtained from your local retailer.
Replacement fuses are 13 amps and MUST be
ASTA approved to BS1362.

Specyfikacje produktu

Marka: Lexicon
Kategoria: edytor
Model: QLI-32

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Lexicon QLI-32, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje edytor Lexicon

Lexicon

Lexicon QLI-32 Instrukcja

22 Września 2024
Lexicon

Lexicon PCM Native Instrukcja

22 Września 2024
Lexicon

Lexicon MPX Native Instrukcja

21 Września 2024

Instrukcje edytor

Najnowsze instrukcje dla edytor

Decimator

Decimator DMON-QUAD Instrukcja

11 Grudnia 2024
ART

ART Pro Channel III Instrukcja

10 Grudnia 2024
TC Helicon

TC Helicon SWITCH-6 Instrukcja

8 Grudnia 2024
TC Helicon

TC Helicon SWITCH-3 Instrukcja

8 Grudnia 2024
Helix

Helix DSP ULTRA Instrukcja

8 Października 2024
Helix

Helix DSP.3S Instrukcja

8 Października 2024
Helix

Helix DSP ULTRA S Instrukcja

8 Października 2024
MyMix

MyMix RX-2 Instrukcja

8 Października 2024
Henry Engineering

Henry Engineering AES DigiSwitch 3X1 Instrukcja

8 Października 2024
SPL

SPL Transient Designer 9946 Instrukcja

8 Października 2024