Instrukcja obsługi Lenco CS-420

Lenco Radia samochodowe CS-420

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Lenco CS-420 (71 stron) w kategorii Radia samochodowe. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/71
CS-420
INSTRUCTION MANUAL
AM/FM-RDS DIGITAL PLL TUNING RADIO
SD/USB/MP3/WMA PLAYER
www.lenco.com
1
LOCATION AND FUNCTION OF CONTROLS
1. RELEASE BUTTON
Press the REL button to release the front control panel from the unit chassis, then pull it up a little to
remove from the unit chassis.
When the front control panel is removed the LED indicator flashes.
2&3&4. SEL BUTTON (Select) AND VOL+/VOL- BUTTONS
a) Press the SEL button briefly, it is activated as selecting each mode of E. VOL.
-> VOL ->BASS ->TRE -> BAL -> FAD->
When selecting a desired E.VOL mode, press the VOL+ or VOL- button to adjust.
In each mode, the waiting time is about 5 seconds, and the waiting time is over, it returns to the last
display mode .
The mode of E.VOL is operated with following numeric display.
- VOL: MIN(00), 01,......46, MAX(47).
- BASS/TRE: -07, -06,...,00,...+06,+07
- BAL: 0LR9, 1LR9, ..., 9LR9,..., 9LR1, 9LR0
- FAD: 0FR9,1FR9, ..., 9FR9,..., 9FR1, 9FR0
b) Press SEL button and hold for more than 2 seconds to turn on TA SEEK/TA ALARM mode, then press
SEL button shortly and repeatedly to select PI SOUND/PI MUTE, RETUNE L/RETUNE S, MASK
DPI/MASK ALL, BEEP ON/BEEP OFF, USER SET
(FLAT/CLASSIC/ROCK/POP),VOL LAST/VOL DEFA ,
STEREO/MONO(in RADIO mode), LOUD OFF/LOUD ON,DX/LOCAL (in RADIO mode), CLK
ON/CLK OFF, CLK 12/24 mode.
After selecting a desired mode, press the VOL- or VOL+ button to select one setup item of the desired
mode.
1) TA SEEK/TA ALARM:
TA SEEK mode: when newly tuned station does not receive TP information for 5 seconds, the radio
retunes to next station which has not the same station (PI) as the last station, but has the TP
information.
When TP information gets lost at the current station for retune time which is set by RETUNE
SHORT(90 seconds) or RETUNE LONG(150 seconds), the radio start to retune to next same PI
station. When same PI station does not catch in 1 cyclic search, the radio retunes to next station with
TP information.
2
TA ALARM mode: when this mode is selected, any automatic retune mode is not activated.
Only double beep sound(ALARM) is out-put.
When newly tuned station does not have TP information for 5 seconds, beeps come out.
When TP information gets lost at the current station for retune time, the beep sound is out-putted.
When newly tuned station has not RDS signal, PI SEEK is suppressed somewhat
2) PI SOUND/ PI MUTE:
PI SOUND mode: if a car cruises that critical area back and forth, an oscillation phenomenon can be
occurred, because the different PI code can be receive from a same AF. when the different PI sound
(DIP) is heard once in a while, the different PI sound will be heard for less than 1 second.
PI MUTE mode: under above same situation, a mute sound will be heard for less than1second.
3) RETUNE L / RETUNE S:
The initial time of automatic TA search or PI SEARCH mode is selected.
When PI information is not caught for retune time , the radio start to retune to next same PI station.
When same PI station does not catch 1 cyclic search, the radio goes to last station and waits for 4-5
minutes until PI code is received.
RETUNE L mode: selected as 150 seconds.
RETUNE S mode: selected as 90 seconds.
4) MASK DPI/MASK ALL:
MASK DPI mode: masked only the AF which has different PI.
MASK ALL mode: masked the AF which has different PI and NO RDS signal with high field strength.
5)BEEP ON/BEEP OFF
BEEP ON mode: The beep sound is generated when any key is pressed.
BEEP OFF mode: The beep sound is disabled.
6) VOL LAST/VOL DEFA
VOL LAST: When power on the unit, the volume level is equal to the one when the unit was last
switched off.
VOL DEFA: After selecting VOL DEFA, press SEL button to display AVOL, then press VOL+ or VOL-
button to adjust AVOL level.
After ACC-power off and ACC-power on the unit, the volume level is equal to the AVOL
level.
7)CLK ON/OFF
CLK ON: Clock will always show on the display when power off.
CLK OFF: Clock will disappear on the display when power off.
5. POWER ON/OFF & MUTE
When the unit is power off, the unit comes to on by pressing any button except the the RELEASE
button.
When the unit is power on, press and hold the power button for more than 0.5 seconds, the unit goes
into power off mode.
When the unit is power on, press the power to switch the MUTE state on/off.
6. LCD Display
7&8. TUNE, SEEK, TRACK, SKIP UP / DOWN BUTTONS
a) In RADIO mode:

Specyfikacje produktu

Marka: Lenco
Kategoria: Radia samochodowe
Model: CS-420

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Lenco CS-420, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Radia samochodowe Lenco

Lenco

Lenco cs 340 Instrukcja

28 Września 2024
Lenco

Lenco CS-180DVD Instrukcja

10 Września 2024
Lenco

Lenco CS-322 Instrukcja

28 Sierpnia 2024
Lenco

Lenco CS-176 Instrukcja

25 Sierpnia 2024
Lenco

Lenco CS-440 BT Instrukcja

22 Sierpnia 2024
Lenco

Lenco CS-173 DAB Instrukcja

21 Sierpnia 2024
Lenco

Lenco CS-174 Instrukcja

16 Sierpnia 2024
Lenco

Lenco CS-410 Instrukcja

15 Sierpnia 2024
Lenco

Lenco CS-430 BT Instrukcja

9 Sierpnia 2024
Lenco

Lenco CS-420 Instrukcja

7 Sierpnia 2024

Instrukcje Radia samochodowe

Najnowsze instrukcje dla Radia samochodowe

Grundig

Grundig scc 1300 vd Instrukcja

15 Stycznia 2025
Autovision

Autovision AV-9740 Instrukcja

14 Stycznia 2025
Dual

Dual XDMA6355 Instrukcja

14 Stycznia 2025
Hyundai

Hyundai H-CDM8028 Instrukcja

14 Stycznia 2025
BLOW

BLOW AVH-9810 Instrukcja

13 Stycznia 2025
Roadstar

Roadstar CD-910RDVD Instrukcja

13 Stycznia 2025
Hyundai

Hyundai H-CCR8085 Instrukcja

13 Stycznia 2025
Caliber

Caliber MCD786 Instrukcja

13 Stycznia 2025
Autovision

Autovision AV-9200TBT Instrukcja

13 Stycznia 2025
Alpine

Alpine TDM-9501RM Instrukcja

12 Stycznia 2025