Instrukcja obsługi Lenco CS-410

Lenco Radia samochodowe CS-410

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Lenco CS-410 (24 stron) w kategorii Radia samochodowe. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/24
CS-410
INSTRUCTION MANUAL
AM/FM-RDS DIGITAL PLL TUNING RADIO
SD/MMC/USB/MP3 PLAYER
www.lenco.eu
1
OPERATING THE UIIT
1.- RESET BUTTON
The unit must be reset under the following conditions:
A) Prior to using this unit for the first time after installation.
B) If the unit fails to operate properly, press the RESET with a pen tip or other pointed instrument.
2. - SEL & VOL CONTROL BUTTON
A) Press the SEL repeatedly to select VOLUME - BASS - TREBLE - BALANCE - FADER.
B)Press SEL button and hold for more than 2 seconds to turn on TA ON/OFF mode, then press SEL button shortly and
repeatedly
to select AF ON/OFF,TA SEEK/TA ALARM PI SOUND/PI MUTE, RETUNE L/RETUNE S, MASKDPI/MASK ALL,
BEEP ON/BEEP OFF, USER SET(FLAT/CLASSIC/ROCK/POP),VOL LAST/VOL DEFA , STEREO/MONO(in FM mode),
LOUD OFF/LOUD ON,DX/LOCAL (in FM mode), CLK ON/CLK OFF,CLK 12/24 mode.
After selecting the desired mode, rotate the VOL- or VOL+ button to select one setup item of the desired mode.
1) TA SEEK/TA ALARM:
TA SEEK mode: when newly tuned station does not receive TP information for 5seconds,the radio retunes to next
station which has adifferent PI to the last station,but has the TPinformation. When TP information gets lost at the current
station for retune time which is set byRETUNE SHORT(90 seconds) or RETUNE LONG(150seconds), the radio starts
to retune to next same PIstation. When same PI station does not receive in 1cyclic search,the radio retunes to next
station with TP information.
TA ALARM mode: when this mode is selected, any autoretune mode is not activated. Only double beep sound (ALARM)
will be heard.When newly tuned station does not have TP information for 5 seconds, beeps are sounded.
When TP information gets lost at the current station for retune time, the beep sound will be heard.When newly tuned
station has no RDS signal, PI SEEK is suppressed .
2) PI SOUND/ PI MUTE:
PI SOUND mode: if a car cruises between buildings that could cause reflectinsignals, a phenomenon may occur, dueto
different PI codes being received from the sameAF source. when different PI sounds (DIP) are heard occassionally, this
will happen for less than 1 second.PI MUTE mode: under above same situation, a mute sound will be heard for less
than1second.
3) RETUNE L / RETUNE S:
The initial time of auto TA search or PI SEARCH mode is selected. When PI information is not received forretune
interval , the radio starts to retune to next same PI station.When same PI station does not receive 1 cyclic search, the
radio goes to last stationand waits for 4-5 minutes until PI code is received.
RETUNE L mode: selected as 150 seconds.
RETUNE S mode: selected as 90 seconds.
4) MASK DPI/MASK ALL:
MASK DPI mode: masks only the AF which has different PI.
MASK ALL mode: masks the AF which has different PI and NO RDS signal with high field strength.
5)BEEP ON/BEEP OFF
BEEP ON mode: The beep is generated when any key is pressed.
BEEP OFF mode: The beep sound is disabled.
6) VOL LAST/VOL DEFA
VOL LAST: The radio switches on at the actual volume it had when it was last switched off.
VOL DEFA: After pressing SEL button, AVOL will be displayed. Then you can pre-select a constant switch-on volume by
using the VOL knob.
7)CLK ON/OFF
CLK ON: Clock will always show on the display when power off.
CLK OFF: Clock will disappear on the display when power off.
3. -POWER ON/OFF AND MUTE
Press the POWER to turn on this unit. To turn off theunit, press and hold this button unit it off.
During playing, press this to mute the sound.
4. - LCD DISPLAY
2
5. - MODE PTY BUTTON
Press the MODE to select RADIO/CARD(SD/MMCcard inserted)/USB(flash driver inserted)/AUX mode.
Press the button longer than 2 seconds to select the following mode: POP M- - NEWS while selecting PTY TYPE, its
selection
is implemented by present buttons as describe in present key,(press one of the 6 present buttons shortly and repeatedly to
select
the PTY TYPE in the present button)When POP M or NEWS is on, the previous PTY program and PTY word is displayed
on LCD. If there are no keys entered for 2 seconds, previously selected PTY is searched.
If desired PTY is not found, NO PTY is flashed, then return to previous normal radio and PTY icon goes off.
6&7. - TUNE,SEEK, TRACK, SKIP UP/DOWNBUTTONS
A) Radio mode
Press the>>I or I<< to perform manual seek tuning. Press and hold the >>I or I<< to perform automatic tuning.
The unit will tune to the station with strong signal.
B) SD/MMC, and USB mode
Press the >>I or I<< to play the next or previous track.
8. - BAND & AP BUTTON
Press the BAND to select radio band as follow: Fm1 -> FM2 -> FM3 -> MW1 -> MW2
Press and hold this button to activate the auto storage function. The unit scans and preset the stations with strongest
signal.(18stations in FM , 12 stations in MW )
9. - CLOCK BUTTON
Press the CLK button briefly to display time for 5 seconds then press and hold the CLK button for more than 1sencond
until the real time flashes on the display and then you can adjust the time by the SEL button.
10-15. - PRESET STATIONS MEMORY AND >II, INT, RPT, RDM BUTTONS
A) Radio mode
Press the 1-6 buttons to select the preset stations.
Press and hold the 1-6 buttons to store the station that currently listening.
B) SD/MMC, and USB mode
Press the >II to pause or resume playing. Press the INT to play the first 10 seconds of the tracks.
Press again to off this function and the current track will keep playing.
Press the RPT once to repeat plays the current track.Press the RPT twice to repeat plays the current folder.
Press the RDM to turn random play on or off.
Press the 5/6 to move up or down 10 tracks at a time(Note: when the remaining tracks less than 10, this function is invalid)
During playback, press and hold the +10 to select the next folder to be play.
16.-AUX JACK
Press the MODE to select auxiliary input playing mode when connecting with external audiodevice.
17.-SD/MMC CARD SLOT
When SD/MMC card is inserted,the unit is automatically switched to SD/MMC mode.(Note:if both USB storage device
and SD/MMC card inserted,the system will switch to the mode of the latest connected.)
18.-USB PORT
When USB storage device is connected, the unit is automatically switched to USB mode.
INSTALLATION METHOD

Specyfikacje produktu

Marka: Lenco
Kategoria: Radia samochodowe
Model: CS-410

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Lenco CS-410, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Radia samochodowe Lenco

Lenco

Lenco cs 340 Instrukcja

28 Września 2024
Lenco

Lenco CS-180DVD Instrukcja

10 Września 2024
Lenco

Lenco CS-322 Instrukcja

28 Sierpnia 2024
Lenco

Lenco CS-176 Instrukcja

25 Sierpnia 2024
Lenco

Lenco CS-440 BT Instrukcja

22 Sierpnia 2024
Lenco

Lenco CS-173 DAB Instrukcja

21 Sierpnia 2024
Lenco

Lenco CS-174 Instrukcja

16 Sierpnia 2024
Lenco

Lenco CS-410 Instrukcja

15 Sierpnia 2024
Lenco

Lenco CS-430 BT Instrukcja

9 Sierpnia 2024
Lenco

Lenco CS-420 Instrukcja

7 Sierpnia 2024

Instrukcje Radia samochodowe

Najnowsze instrukcje dla Radia samochodowe

Grundig

Grundig scc 1300 vd Instrukcja

15 Stycznia 2025
Autovision

Autovision AV-9740 Instrukcja

14 Stycznia 2025
Dual

Dual XDMA6355 Instrukcja

14 Stycznia 2025
Hyundai

Hyundai H-CDM8028 Instrukcja

14 Stycznia 2025
BLOW

BLOW AVH-9810 Instrukcja

13 Stycznia 2025
Roadstar

Roadstar CD-910RDVD Instrukcja

13 Stycznia 2025
Hyundai

Hyundai H-CCR8085 Instrukcja

13 Stycznia 2025
Caliber

Caliber MCD786 Instrukcja

13 Stycznia 2025
Autovision

Autovision AV-9200TBT Instrukcja

13 Stycznia 2025
Alpine

Alpine TDM-9501RM Instrukcja

12 Stycznia 2025