Instrukcja obsługi LED Lenser SEO3
LED Lenser
Flesz
SEO3
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla LED Lenser SEO3 (52 stron) w kategorii Flesz. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/52
LED LENSER® * SEO 3
Operating instructions
Bedienungsanleitung
Instrucciones de uso
Mode d‘emploi
Gebruiksaanwijzing
Istruzioni per l‘uso
Návod k použití
Návod na použitie
Használati útmutató
Navodila za uporabo
Руководство по эксплуатации
수동
取扱説明書
手册
6003 - LED LENSER® SEO 3
6103 - LED LENSER® SEO 3 (blister)
6004 - LED LENSER® SEO 3
6104 - LED LENSER® SEO 3 (blister)
V 1.4
1.
2.
1
2
1.
2
+
-
+
-
-
+
1
AAA
1,5 V
LRO3
2
English ........................................... 03-05
Deutsch .......................................... 06-09
Español .......................................... 10-12
Français ......................................... 13-16
Nederlands................................... 17-20
Italian.............................................. 20-23
Čeština......................................... 24-26
Slovenčina ................................. 29-30
Magyar......................................... 31-34
Slovenščina ............................... 34-36
Pусский ......................................... 37-40
한국어 ............................................ 41-43
日本語 ............................................ 44-47
中文 ................................................. 48-50
LED LENSER® * SEO 3
3
English | Page 03-05 GB
We are delighted that you have purchased one of
our products.
These are usage instructions to help you
familiarise yourself with your new purchase.
All the documents accompanying the product
must be read attentively before using the
product, preserved carefully and if the product
is transferred to a third party, the documents
must be handed over as well. This ensures that
maximum benefit is drawn from the product and
questions from users are anticipated before they
arise.
Above all, comply with the warnings and safety
instructions and dispose of the packaging
material properly.
Additional information for SEO with TEST IT
function
Your LED LENSER SEO 3 headlamp with the item
no. 6103 (item no. 6003: No TEST IT function ) is
packaged with a TEST IT function. This allows
users to test the brightness while the product is
still in the package. For testing, simply push the
yellow TEST IT button on the front of the package.
When testing, please do not look directly into the
light.
The TEST IT button is connected to the battery
housing of the SEO 3 via two wires and should be
removed prior to use.
To remove the TEST IT button and wires, open
the battery housing and remove the 3 x AAA
batteries (see also “Changing of the batteries
/ accumulators” further below). Separate the
two TEST IT button wires from the battery
housing by pulling on each wire until it releases
from the battery housing. Insert the 3 x AAA
batteries noting the correct polarity. Close the
battery housing. Please dispose and recycle the
packaging and TEST IT button with the wires
according to the local regulations.
Product
6003 LED LENSER SEO 3 Green
6103 LED LENSER SEO 3 Green (blister)
6004 LED LENSER SEO 3 Orange
6104 LED LENSER SEO 3 Orange (blister)
1. Battery set:
- 3 x Alkaline batteries AAA/LR03/Micro (1.5 V
DC) (scope of delivery)
- 3 x NiMH-Accumulator AAA/LR03/Micro (1.2 V
DC) (not included in scope of delivery)
2. Switching on and off
In the upper part of the headlamp housing of the
SEO 3, between battery box and the part with
the reflector lens, there is the swich button. This
switch button is used to turn the SEO 3 on. It is
also used to activate the various Light Programs
and Lighting Functions (see Point 5) and to switch
between white light and red light (see Point 5).
In addition, you can also activate the”Transport
Lock”(see Point 6).
3. Focus
In the front, narrower region of the headlamp
housing is the reflector lens through which the
light of the white LED (see Point 5.1) is focused.
The reflector lens is held by a plastic ring. You can
rotate that plastic ring using two fingers, and thus
adjust the focus quickly and easily. This Turning
Focus allows to adjust the angle of the white light
beam continuously. Depending on whether you
want to illuminate an area in the distance or in
front of you, you also can adjust the angle of light
beam to the horizontal. For this you can simply
tilt the part of the head lamp, which contains the
reflector lens and the white LED. The screening
allows using also intermediate positions.
4. Smart Light Technology (SLT)
The SEO 3 is equipped with our Smart Light
Technology (SLT). Thanks to the use of a
microcontroller, the light output of the LED can
be controlled and the user can use various Light
Programs and Light Functions. By using a single
switch it was possible to design the interface
to be simple and user-friendly. The SEO 3 can
give the user light in different ways. There are
thus two Light Programs and a number of Light
Functions available. To switch the pocket torch on
and off and to select the various Light Functions
etc., the switch (see Point 2) has to be used.
What basically applies is that the brightness of the
SEO 3 is monitored by the in-built temperature
control unit.
5. Light Programs and Light Functions
In the SEO 3 are two LEDs (LED= Light Emitting
Diode) installed.
The white LEDs are ideal for normal use. This
very bright white light might be not good when
your eyes have become accustomed through the
so-called dark adaptation to low ambient light.
Otherwise than with the use of the whitelight, it
remains the current adjustment of the eye to low
brightness obtained when the red light of the red
LED is used.
In order to switch between the white and the red
LED, when the SEO 3 is off, press and hold the
switch button for 2 seconds. The head lamp will
change from red to white or from white to red,
and then release the switch button before the
lights go out, because if you press too long the
switch button you activate the “Transport Lock”
(see section 6)!
The points below deal with the Light Functions
of the white LEDs (Light Program White / Point
5.1) and the red LED (Light Program “Red Night
Vision” / Point 5.2).
5.1 Light Program White
If the Lighting Program White is enabled (see
Point 5), you can use the white light of the head
lamp.
When the switch button is pressed, if the SEO 3
is off, the head lamp glows in the Light Function
Power at full brightness. When you switch a
second time within 2 seconds, the SEO 3 glows
with lower brightness (Light Low Power).
After the Light Function Low Power (altogether
3 times fast switching, i.e. you do not wait longer
than 2 seconds between each switching) comes
the Light Function Signal (slow even flashing) in
the Light Program White.
Additional switching turns SEO 3 off and the circle
starts again with the Light Function Power when
you press the switch button again.
So the Light Functions are in a loop. But Please
note that you turn off the head lamp by every
switching if since the previous switching more
than 2 seconds have elapsed. For example in
case you let pass more than 2 seconds after you
turned the Light Function Low Power on the next
switching will not change to head lamp to Light
Function Signal but will turn the SEO 3 off.
Specyfikacje produktu
| Marka: | LED Lenser |
| Kategoria: | Flesz |
| Model: | SEO3 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z LED Lenser SEO3, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Flesz LED Lenser
11 Października 2024
2 Października 2024
1 Października 2024
22 Września 2024
16 Września 2024
11 Września 2024
10 Września 2024
1 Września 2024
28 Sierpnia 2024
27 Sierpnia 2024
Instrukcje Flesz
- Flesz Beko
- Flesz Gorenje
- Flesz Milwaukee
- Flesz Philips
- Flesz SilverCrest
- Flesz Toolcraft
- Flesz Nedis
- Flesz Black & Decker
- Flesz Fenix
- Flesz Garmin
- Flesz DeWalt
- Flesz Einhell
- Flesz Silverline
- Flesz Makita
- Flesz ArmyTek
- Flesz Petzl
- Flesz Knog
- Flesz Cateye
- Flesz Ledlenser
- Flesz Emos
- Flesz NightStick
- Flesz Ansmann
- Flesz Little Tikes
- Flesz Velleman
- Flesz VDO
- Flesz IVT
- Flesz Rocktrail
- Flesz Maglite
- Flesz Aluratek
- Flesz Abus
- Flesz Olympia
- Flesz Hama
- Flesz Alpen Optics
- Flesz Princeton Tec
- Flesz Duronic
- Flesz Goobay
- Flesz Trelock
- Flesz Nitecore
- Flesz Craftsman
- Flesz Olight
- Flesz Klein Tools
- Flesz Black Diamond
- Flesz PowerPlus
- Flesz Powerfix
- Flesz HiKOKI
- Flesz Dörr
- Flesz SureFire
- Flesz AccuLux
- Flesz Varta
- Flesz Spanninga
- Flesz Brennenstuhl
- Flesz Streamlight
- Flesz Nordride
- Flesz Silva
- Flesz Trebs
- Flesz Maktec
- Flesz Steren
- Flesz Livarno
- Flesz Kayoba
- Flesz Barska
- Flesz Parat
- Flesz Coleman
- Flesz Energizer
- Flesz Silva Schneider
- Flesz Tecxus
- Flesz Goal Zero
- Flesz Beghelli
- Flesz 4K5
- Flesz GP
- Flesz CEL-TEC
- Flesz Nebo
- Flesz Underwater Kinetics
- Flesz MOON
- Flesz KSE-Lights
- Flesz SuperNova
- Flesz Coast
Najnowsze instrukcje dla Flesz
15 Października 2024
9 Października 2024
9 Października 2024
9 Października 2024
9 Października 2024
8 Października 2024
8 Października 2024
8 Października 2024
8 Października 2024
8 Października 2024